Page 13 Penn Tool Co. Precision Tooling 2014 Sale Catalog
P. 13
ELECTRONIC ROTOR GAGE
•
Range: 5.5"/140mm
•
Reads in inch, metric and fractions.
•
Direct inch/metric/fraction conversion.
•
Resolution: .0005"/.01mm (Fractions
in 1/64" increments)
•
Water resistant to IP54 standards.
•
Conical
anvil
for
groove
measurement.
•
3.5" jaw depth for larger rotors.
•
Includes molded case.
•
Water resistant to IP54 standards.
•
Conical anvils measure scored
surfaces
•
3.5" jaw depth for larger rotors.
•
Includes molded case.
ELECTRONIC BRAKE DRUM GAGE
•
4" to 20"/100 to 500mm capacity.
•
Inch/Metric/Fraction conversion.
•
4" drum preset.
•
Zero Set.
•
Hold function.
•
Preset depth at 1" and 1.5".
•
Resolution
0.0005"/0.01mm
(Fractions in 1/64" increments)
•
Protected to IP54 specifications.
•
Beam has vernier scale to double
check reading.
•
Thumb lock.
•
Direct RS-232 output.
•
Can be used to check some disc
measurements.
•
Includes wooden case.
MODEL No.
74-150-020
Reg. List
$285.00
•
Range: 5.5"/140mm
•
Reads in inch, metric and fractions.
•
Direct inch/metric/fraction conversion.
•
Resolution: .0005"/.01mm (Fractions
in 1/64" increments)
With Flat & Conical Anvil
ELECTRONIC ROTOR GAGE
With Twin Conical Anvils
DRUM AND ROTARY MEASURING KIT
WITH ELECTRONIC CALIPER
Drum and Rotor Kit Features:
•
Measures disc brakes and up to 12"/
300mm or 16"/400mm on brake
drums.
•
When measuring brake drums only,
add 8" to measurement- allows for
long cone & jaw widths.
•
Includes set of clamps; 4 sets of set
screws; 1 Allen wrench; 1 set of 3-3/
4" contact points; 1 set of 3/4" cone
contact points & 1 set of 3/4" flat
contact points in plastic tube.
•
16"/400mm Set includes 1 pair of 2"
extensions.
ELECTRONIC GROOVE & RECESS GAGE
•
Direct RS-232 output.
•
External measurement 0-12" depending
on accessories.
•
Internal measurement 1-13/16" - 13-1/
2" depending on accessories.
•
Resolution: .0005"(.01mm)
•
Accuracy: ±0015"(.04mm)
•
Sylvac capacitive measuring system.
•
Measures rotors and brake drums.
•
Two preset memories.
•
Inch/metric conversion.
•
Interchangeable anvils for inside/
outside measurement.
•
Includes flat and point style contacts
& battery.
•
Uses 4-48 thread contact points.
MODEL No.
74-150-012
Reg. List
$525.00
$395.00
$195.00
MODEL No.
74-150-004
Reg. List $95.00
$69.95
Precise
ELECTRONIC DIGITAL DEPTH GAGE
•
SPC Output.
•
.0005"/.01mm resolution
•
Inch/metric conversion.
•
Zero set.
•
On/Off.
Precise
ELECTRONIC DEPTH GAGE
• Sliding LCD unit features push-button • Accuracy: .001"/.02mm
control.
• Stainless steel liniear scale.
• Inch/Metric conversion.
• 0-6"/0-150mm Range, 4" Base.
• With Fitted case.
• With Hook.
MODEL No.
4500-0006
$49.95
.0005"/.01mm Resolution
•
Exclusive 4-48 threaded holes in accessory jaws allow the use of any AGD
Standard Point w/4-48 threads - virtually unlimited uses.
•
Measure places impossible to reach with regular caliper - undercuts,
grooves, webs, etc. Exclusive interchangeable centerline cones.
•
•
Cold rolled steel, case hardened with black oxide plating for long life &
corrosion protection. Permanent alignment pin assures easy alignment.
•
•
Includes hex key and all hardware for attaching jaws to calipers.
•
Comes complete in a fitted mahogany case.
CENTERLINE PLUS ACCESSORY KIT
SET No.
CPA-367
Reg List $110.00
Fits all
6” Dial, Digital,
& Vernier calipers
$79.95
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Model
74-150-006
74-150-002
74-100-350
Description
Rotary Gage with 3-1/2" Jaw Depth $ 95.00
Rotary Gage with 6" Jaw Depth
Replacement Battery
List
125.00
-
Sale
$69.95
79.95
3.95
Model
303-752
303-753
303-755
303-756
Range
0-6" x 0-150mm
0-8" x 0-200mm
0-12" x 0-300mm
0-20" x 0-500mm
Base
4"
4"
4"
4.7"
Sale
$ 45.00
49.50
59.50
115.00
Model
74-101-777
74-101-888
72-010-777
72-010-888
Description
12"/300mm Drum and Rotor with
16"/400mm Drum and Rotor with
12"/300mm Drum Kit only
16"/400mm Drum Kit only
List
$ 95.00
110.00
65.00
75.00
Sale
$75.00
89.50
39.50
45.00
Page 13
•
Range: 5.5"/140mm
•
Reads in inch, metric and fractions.
•
Direct inch/metric/fraction conversion.
•
Resolution: .0005"/.01mm (Fractions
in 1/64" increments)
•
Water resistant to IP54 standards.
•
Conical
anvil
for
groove
measurement.
•
3.5" jaw depth for larger rotors.
•
Includes molded case.
•
Water resistant to IP54 standards.
•
Conical anvils measure scored
surfaces
•
3.5" jaw depth for larger rotors.
•
Includes molded case.
ELECTRONIC BRAKE DRUM GAGE
•
4" to 20"/100 to 500mm capacity.
•
Inch/Metric/Fraction conversion.
•
4" drum preset.
•
Zero Set.
•
Hold function.
•
Preset depth at 1" and 1.5".
•
Resolution
0.0005"/0.01mm
(Fractions in 1/64" increments)
•
Protected to IP54 specifications.
•
Beam has vernier scale to double
check reading.
•
Thumb lock.
•
Direct RS-232 output.
•
Can be used to check some disc
measurements.
•
Includes wooden case.
MODEL No.
74-150-020
Reg. List
$285.00
•
Range: 5.5"/140mm
•
Reads in inch, metric and fractions.
•
Direct inch/metric/fraction conversion.
•
Resolution: .0005"/.01mm (Fractions
in 1/64" increments)
With Flat & Conical Anvil
ELECTRONIC ROTOR GAGE
With Twin Conical Anvils
DRUM AND ROTARY MEASURING KIT
WITH ELECTRONIC CALIPER
Drum and Rotor Kit Features:
•
Measures disc brakes and up to 12"/
300mm or 16"/400mm on brake
drums.
•
When measuring brake drums only,
add 8" to measurement- allows for
long cone & jaw widths.
•
Includes set of clamps; 4 sets of set
screws; 1 Allen wrench; 1 set of 3-3/
4" contact points; 1 set of 3/4" cone
contact points & 1 set of 3/4" flat
contact points in plastic tube.
•
16"/400mm Set includes 1 pair of 2"
extensions.
ELECTRONIC GROOVE & RECESS GAGE
•
Direct RS-232 output.
•
External measurement 0-12" depending
on accessories.
•
Internal measurement 1-13/16" - 13-1/
2" depending on accessories.
•
Resolution: .0005"(.01mm)
•
Accuracy: ±0015"(.04mm)
•
Sylvac capacitive measuring system.
•
Measures rotors and brake drums.
•
Two preset memories.
•
Inch/metric conversion.
•
Interchangeable anvils for inside/
outside measurement.
•
Includes flat and point style contacts
& battery.
•
Uses 4-48 thread contact points.
MODEL No.
74-150-012
Reg. List
$525.00
$395.00
$195.00
MODEL No.
74-150-004
Reg. List $95.00
$69.95
Precise
ELECTRONIC DIGITAL DEPTH GAGE
•
SPC Output.
•
.0005"/.01mm resolution
•
Inch/metric conversion.
•
Zero set.
•
On/Off.
Precise
ELECTRONIC DEPTH GAGE
• Sliding LCD unit features push-button • Accuracy: .001"/.02mm
control.
• Stainless steel liniear scale.
• Inch/Metric conversion.
• 0-6"/0-150mm Range, 4" Base.
• With Fitted case.
• With Hook.
MODEL No.
4500-0006
$49.95
.0005"/.01mm Resolution
•
Exclusive 4-48 threaded holes in accessory jaws allow the use of any AGD
Standard Point w/4-48 threads - virtually unlimited uses.
•
Measure places impossible to reach with regular caliper - undercuts,
grooves, webs, etc. Exclusive interchangeable centerline cones.
•
•
Cold rolled steel, case hardened with black oxide plating for long life &
corrosion protection. Permanent alignment pin assures easy alignment.
•
•
Includes hex key and all hardware for attaching jaws to calipers.
•
Comes complete in a fitted mahogany case.
CENTERLINE PLUS ACCESSORY KIT
SET No.
CPA-367
Reg List $110.00
Fits all
6” Dial, Digital,
& Vernier calipers
$79.95
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Model
74-150-006
74-150-002
74-100-350
Description
Rotary Gage with 3-1/2" Jaw Depth $ 95.00
Rotary Gage with 6" Jaw Depth
Replacement Battery
List
125.00
-
Sale
$69.95
79.95
3.95
Model
303-752
303-753
303-755
303-756
Range
0-6" x 0-150mm
0-8" x 0-200mm
0-12" x 0-300mm
0-20" x 0-500mm
Base
4"
4"
4"
4.7"
Sale
$ 45.00
49.50
59.50
115.00
Model
74-101-777
74-101-888
72-010-777
72-010-888
Description
12"/300mm Drum and Rotor with
16"/400mm Drum and Rotor with
12"/300mm Drum Kit only
16"/400mm Drum Kit only
List
$ 95.00
110.00
65.00
75.00
Sale
$75.00
89.50
39.50
45.00
Page 13
