Page 351 Penn Tool Co. Precision Tooling 2014 Sale Catalog
P. 351
•
The R-M10 roller has a powerful manual
drive system that allows for complete
rings
•
Manual adjustment of top roll
•
manually powered
•
Great for doing complete circles
•
Hardened standard tooling for long life
•
A wide array of optional tooling aets are
available.
MANUAL RING ROLL BENDER
Manual
Single
1.181"
3.86"
4.65"
6.7"(lower rolls)
2"
N/A
N/A
Manual
60" / 44" / 68"
435 lbs.
Size
1 “ (Sch.40)
1.25"(.078")
1.2" (.078")
1.25" (.157")
.75"
.875"
2" (.375)
.75" (.188)
Min. Dia.
28"
31.5"
35"
30"
20"
20"
15.75"
6.5"
Capacity
Pipe
Round Tube
Square Tube
Angle Iron
Solid Square
Solid Round
Flat Bar Easy Way
Flat Bar Hard Way
Roll Adjustment
Pinch
Shaft Diameter
Roll Diameter
Upper
Lower
Shaft Center Distance
Driven Rolls
Speeds
Motor
Power Requirement
Shipping Dimensions (L/W/H)
Weight
MODEL No.
R-M10
$1550.00
DEBURRING/CHAMFERING MACHINE
•
Palmgren's line-up of edge finishing
machines effectively deburr, chamfer
and bevels edges on flat and square
metal and plastics.
•
Makes short work deburring projects
the "go-to" machine for edge finishing.
•
Bevel angle 45 degrees
•
Minimum material thickness 1/8"
•
maximum bevel depth up to 1/8"
•
3/4 horsepower, 110 volt.
MODEL No.
82300
$459.95
Model
No.
PHS-500
PHS-800
PHS-100
PHS-120
Blade
Length
5"
8"
10"
12"
Weight
lbs.
27 lbs.
40 lbs.
50 lbs.
65 lbs.
Price
Each
$105.00
115.00
145.00
160.00
THROATLESS HAND SHEARS
•
Throatless design.
•
Cuts up to 3/16" steel.
•
Shears up to 3/8" round bar.
•
Adjustable work hold down.
•
Arched top blade allows
effortless cutting throughout
the stroke.
•
Heavy steel frame.
•
"Super Duty" tool features a 3" deep throat, with heavy
reinforced cast iron frame to prevent "Yawning" or
flexing allowing forming metal faster than lighter weight
tools.
•
Model WFSS-SD will form sheet metal up to 18 gauge
thickness or aluminum up to 1/16" thick.
•
The ideal tool for making those hard to find patch
panels around windshield corners, trunk seals, wheel
well openings or custom sheet metal edges and corners.
SUPER DUTY SHRINKER STRETCHER
Super Duty
MODEL No
WFSS-SD
$389.95
MODEL No.
WFSS11
Stand
$109.95
TRACK SAW AND GUIDE RAIL
This is a great portable option for accurately cutting sheet goods without a table saw
or panel saw, especially when regularly switching job sites. This Track Saw features
a plunge action and riving knife for unmatched safety over conventional circular
saws. However, when used by itself without the guide rail, this saw is a highly
accurate, bevel--cutting circular saw. The Guide Rail features a non-slip base and can
be joined to additional Guide Rails for longer continuous cuts.
Specifications:
•
Motor: 120V, 9A, 1.1 kW, 5500 RPM
•
Blade rim speed: 9070 ft/min
•
Blade diameter: 160mm (6-1/4")
•
Included blade type: 48 tooth, carbide tip
•
Arbor size: 20mm
•
Cutting Capacity:
With track: 1-33/32" @ 90º, 1-7/16"@ 45º
Without track: 2-5/32" @ 90º, 1-5/8" @ 45º
•
Shipping Weight: 24 lbs.
Features:
•
Anti kickback design with spring loaded
riving knife.
•
Low profile blade guard for cuts as close as
5/8" from wall
•
1-1/2" dust port for collection to a shop
vacuum or a dust collection system
•
Anti-slip surface on underside for secure
grip
•
Sliding surfaces for smooth machine
operation
•
Ensures accurate, splinter free cuts.
•
Includes 55" track, clamps, and saw blade.
MODEL No.
W1832
Reg. $310.00
Includes:
55" Track
Accessory Pack (2 Clamps,
1 Rail Connector, 1 Flip Stop,
and 1 Stabilizer)
48T Replacement Blade
$249.95
•
It is now possible to measure the
curvature of an arc quickly, easily and
accurately. Instantly measure anything
from hand-railing to door-way arches,
or anything that is curved.
•
It is easy to replicate curves made on
machines such as Ring Rollers and Plate
Rolls.
Inside Radius Gauge
MODEL No. IRG-3600
$150.00
Outside Radius Gauge
MODEL No. ORG-3600
$150.00
RING ROLLER AND PLATE ROLLER
RADIUS GAUGES
•
Included with each radius gauge is the
variable arc attachment. Used
together with either the Inside radius
gauge or the outside radius gauge the
variable arc will allow the user to
transfer any arc to another medium
easily by tracing along the variable-
arc.
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 351
The R-M10 roller has a powerful manual
drive system that allows for complete
rings
•
Manual adjustment of top roll
•
manually powered
•
Great for doing complete circles
•
Hardened standard tooling for long life
•
A wide array of optional tooling aets are
available.
MANUAL RING ROLL BENDER
Manual
Single
1.181"
3.86"
4.65"
6.7"(lower rolls)
2"
N/A
N/A
Manual
60" / 44" / 68"
435 lbs.
Size
1 “ (Sch.40)
1.25"(.078")
1.2" (.078")
1.25" (.157")
.75"
.875"
2" (.375)
.75" (.188)
Min. Dia.
28"
31.5"
35"
30"
20"
20"
15.75"
6.5"
Capacity
Pipe
Round Tube
Square Tube
Angle Iron
Solid Square
Solid Round
Flat Bar Easy Way
Flat Bar Hard Way
Roll Adjustment
Pinch
Shaft Diameter
Roll Diameter
Upper
Lower
Shaft Center Distance
Driven Rolls
Speeds
Motor
Power Requirement
Shipping Dimensions (L/W/H)
Weight
MODEL No.
R-M10
$1550.00
DEBURRING/CHAMFERING MACHINE
•
Palmgren's line-up of edge finishing
machines effectively deburr, chamfer
and bevels edges on flat and square
metal and plastics.
•
Makes short work deburring projects
the "go-to" machine for edge finishing.
•
Bevel angle 45 degrees
•
Minimum material thickness 1/8"
•
maximum bevel depth up to 1/8"
•
3/4 horsepower, 110 volt.
MODEL No.
82300
$459.95
Model
No.
PHS-500
PHS-800
PHS-100
PHS-120
Blade
Length
5"
8"
10"
12"
Weight
lbs.
27 lbs.
40 lbs.
50 lbs.
65 lbs.
Price
Each
$105.00
115.00
145.00
160.00
THROATLESS HAND SHEARS
•
Throatless design.
•
Cuts up to 3/16" steel.
•
Shears up to 3/8" round bar.
•
Adjustable work hold down.
•
Arched top blade allows
effortless cutting throughout
the stroke.
•
Heavy steel frame.
•
"Super Duty" tool features a 3" deep throat, with heavy
reinforced cast iron frame to prevent "Yawning" or
flexing allowing forming metal faster than lighter weight
tools.
•
Model WFSS-SD will form sheet metal up to 18 gauge
thickness or aluminum up to 1/16" thick.
•
The ideal tool for making those hard to find patch
panels around windshield corners, trunk seals, wheel
well openings or custom sheet metal edges and corners.
SUPER DUTY SHRINKER STRETCHER
Super Duty
MODEL No
WFSS-SD
$389.95
MODEL No.
WFSS11
Stand
$109.95
TRACK SAW AND GUIDE RAIL
This is a great portable option for accurately cutting sheet goods without a table saw
or panel saw, especially when regularly switching job sites. This Track Saw features
a plunge action and riving knife for unmatched safety over conventional circular
saws. However, when used by itself without the guide rail, this saw is a highly
accurate, bevel--cutting circular saw. The Guide Rail features a non-slip base and can
be joined to additional Guide Rails for longer continuous cuts.
Specifications:
•
Motor: 120V, 9A, 1.1 kW, 5500 RPM
•
Blade rim speed: 9070 ft/min
•
Blade diameter: 160mm (6-1/4")
•
Included blade type: 48 tooth, carbide tip
•
Arbor size: 20mm
•
Cutting Capacity:
With track: 1-33/32" @ 90º, 1-7/16"@ 45º
Without track: 2-5/32" @ 90º, 1-5/8" @ 45º
•
Shipping Weight: 24 lbs.
Features:
•
Anti kickback design with spring loaded
riving knife.
•
Low profile blade guard for cuts as close as
5/8" from wall
•
1-1/2" dust port for collection to a shop
vacuum or a dust collection system
•
Anti-slip surface on underside for secure
grip
•
Sliding surfaces for smooth machine
operation
•
Ensures accurate, splinter free cuts.
•
Includes 55" track, clamps, and saw blade.
MODEL No.
W1832
Reg. $310.00
Includes:
55" Track
Accessory Pack (2 Clamps,
1 Rail Connector, 1 Flip Stop,
and 1 Stabilizer)
48T Replacement Blade
$249.95
•
It is now possible to measure the
curvature of an arc quickly, easily and
accurately. Instantly measure anything
from hand-railing to door-way arches,
or anything that is curved.
•
It is easy to replicate curves made on
machines such as Ring Rollers and Plate
Rolls.
Inside Radius Gauge
MODEL No. IRG-3600
$150.00
Outside Radius Gauge
MODEL No. ORG-3600
$150.00
RING ROLLER AND PLATE ROLLER
RADIUS GAUGES
•
Included with each radius gauge is the
variable arc attachment. Used
together with either the Inside radius
gauge or the outside radius gauge the
variable arc will allow the user to
transfer any arc to another medium
easily by tracing along the variable-
arc.
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 351
