Page 36 Penn Tool Co. Precision Tooling 2014 Sale Catalog
P. 36
UNIVERSAL DIAL TEST INDICATOR
•
Universal application to all directions. (Not only the direction of the measuring
point, but also the direction of measurement itself can be adjusted 360 degrees
without moving the indicator).
SET No.
513-304GT
List $438.00
$369.95
Full Set
.039"
.118"
MAXUM® II DIGITAL COMPARATOR
0.00001", 0.00002" Selectable Range
Standard Features
•
Inch/Metric-operator selectable
with switchable resolution.
•
Normal/Reverse Sensing.
•
Preset capabilities to view actual
size.
•
"Absolute" Transducer - no
overspeed errors or constant re-
zeroing. Transducer always
remembers its location, even if
power is off.
•
High resolution digital readout and
analog bar graph-digital display
shows deviation from zero or actual
dimension size (Preset).
•
Lightweight, contamination resistant,
ruggedly built to withstand hard use-
gasket case, crystal and stem
assemblies resist fluid contamination.
•
Calibratable - if ever needed-values
remembered even after battery
charge.
•
Marconnect data output: USB, OPTO
RS232C, Digimatic.
•
Auto-power down - provides
extremely low battery consumption.
•
Unilateral Tolerances, Go/NoGo
display feature.
Advanced Features
•
Dynamic mode operation:
-Max, Min, TIR
•
Two
point
difference
measurement-Provides
comparison of two readings or
measuring locations.
Calculate the distance between
2 measured values.
•
Multiplier factor for ration
measurements.
•
Hold function-holds reading on
display until ready to resume
measuring.
•
Data output with serial number
identification capability.
•
Data output with selectable
continuous output or single
request of readings
2034101
2034103
2034201
2034203
No.
No.2034252
2034212
Stem Diameter
.375" or 8mm
(Specify)
Model
No.
2034101
2034103
2034201
2034203
2034252
2034212
Range
Inch
±0.040"
±0.040"
±0.040"
±.040"
±.050"
±1.00"
Resolution
Selectable
Features
Standard
Standard
Advanced
Advanced
Advanced
Advanced
Stem
Length
0.46"
1.50"
0.46"
1.50"
0.63"
0.63"
Sale
Price
$345.00
345.00
430.00
430.00
430.00
495.00
0.00001", 0.00002"
0.00005", 0.00001"
0.0002", 0.0005",
0.001"
(
)
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Model
513-304GT
Graduation
.0005"
Range
.03"
Reading
0-15-0
Accuracy
.0005"
Page 36
SOLAR ELECTRONIC ABS
DIGIMATIC INDICATOR
•
Measurement tool with a solar power
source. Ready for use from 40 lux
illumination.
•
Two large function buttons improve
operability.
•
Mitutoyo's unique ABS (Absolute) sensor
automatically restores the last origin
position when the indicator is turned
on. This allows quick-start operation,
which is especially useful in multipoint
measurement.
Model
No.
543-502
543-502B
543-507
543-507B
21EZA199
21EZA150
540774
905338
905409
Range
Inch/Metric
.5"/12.7mm
.5"/12.7mm
.5"/12.7mm
.5"/12.7mm
Resolution
Inch/metric
.00005"/0.001mm
.00005"/0.001mm
.0005"/0.01mm
.0005"/0.01mm
List
Price
$296.00
296.00
190.00
190.00
Sale
Price
$269.95
269.95
169.95
169.95
$ 5.00
21.00
30.00
35.50
42.00
Lifting Lever
Lifting Knob
Lifting Cable
SPC Connecting Cable 40"
SPC Connecting Cable 80"
•
A super capacitor maintains a reserve
of approx. 3.5 hours under low light
conditions.
•
Origin-set +/- direction and inch/mm.
•
Resolution: .0005"/0.01mm or .00005"/
0.001mm
•
Measuring Range: .5"/12.7mm
•
Stem diameter: 3/8" or 8mm available.
•
SPC output provided.
•
Character Height: 9mm
3/8" Stem Diameter - 1.5N or Less Measuring Force
Lifting Lever
Lifting Knob
Lifting Cable
* No.'s 543-502 and 543-507 have Lug Backs.
No.'s 543-502B and 543-507B have Flat Back
Precise
DIAL INDICATOR DEPTH BASE
•
Fits any standard AGD dial indicator with 3/8"
diameter stem.
•
Made of hardened and ground steel for flatness.
•
Black oxide finish.
Model
9228
9229
Base Length
2-1/2"
4"
Price
$23.95
27.95
STANDARD DIAL INDICATORS
•
Accuracy meets or exceeds Federal
Specifications.
•
Easy reading graduations.
•
Thread size: #4-48, metric 2.5mm
•
Stem diameter 3/8", metric 8mm.
•
Adjustment bezel for convenient zero setting
with clamp screw.
•
Lug back supplied except
where noted.
$50.35
1" Range
.001" Grad.
MODEL NO.
20-703-5
Reg. $65.00
* AGD Group 1 • Flat Back Only
The only electronic indicator
that fully conforms with
DIN requirements
•
Dimensions according to DIN 878
•
ABSOLUTE measuring mode.
•
Combined analog/digital display.
•
Mechanical tolerance markers.
•
OPTO-RS data output.
•
Auto-reverse and lockable
keypad.
•
Inspection report included.
•
Swiss made.
DIGICO 205 DIGITAL
ELECTRONIC INDICATOR
Model
No.
39676
Range
In/mm
.5"/12.5mm 0005"/0.01mm
Resolution
In/mm
Measuring
Force (N)
<2.0
List
Price
$265.00
Sale
Price
$235.00
Model
14-653-0*
14-654-8*
20-701-9•
20-704-3
20-700-1
20-703-5
20-361-2
Range
0.250"
0.250"
0.200" 0-100 & 0-50-0
0.500" 0-50 & 0-25-0
0.500" 0-100 & 0-50-0
1.000" 0-100 & 0-50-0
Dial Reading Graduation
0-50-0
1-100
0.001"
0.001"
0.0001"
0.0005"
0.001"
0.001"
Sale
$67.70
67.70
$103.25
56.10
51.45
50.35
$4.65
Steel Ball Contact Point
•
Universal application to all directions. (Not only the direction of the measuring
point, but also the direction of measurement itself can be adjusted 360 degrees
without moving the indicator).
SET No.
513-304GT
List $438.00
$369.95
Full Set
.039"
.118"
MAXUM® II DIGITAL COMPARATOR
0.00001", 0.00002" Selectable Range
Standard Features
•
Inch/Metric-operator selectable
with switchable resolution.
•
Normal/Reverse Sensing.
•
Preset capabilities to view actual
size.
•
"Absolute" Transducer - no
overspeed errors or constant re-
zeroing. Transducer always
remembers its location, even if
power is off.
•
High resolution digital readout and
analog bar graph-digital display
shows deviation from zero or actual
dimension size (Preset).
•
Lightweight, contamination resistant,
ruggedly built to withstand hard use-
gasket case, crystal and stem
assemblies resist fluid contamination.
•
Calibratable - if ever needed-values
remembered even after battery
charge.
•
Marconnect data output: USB, OPTO
RS232C, Digimatic.
•
Auto-power down - provides
extremely low battery consumption.
•
Unilateral Tolerances, Go/NoGo
display feature.
Advanced Features
•
Dynamic mode operation:
-Max, Min, TIR
•
Two
point
difference
measurement-Provides
comparison of two readings or
measuring locations.
Calculate the distance between
2 measured values.
•
Multiplier factor for ration
measurements.
•
Hold function-holds reading on
display until ready to resume
measuring.
•
Data output with serial number
identification capability.
•
Data output with selectable
continuous output or single
request of readings
2034101
2034103
2034201
2034203
No.
No.2034252
2034212
Stem Diameter
.375" or 8mm
(Specify)
Model
No.
2034101
2034103
2034201
2034203
2034252
2034212
Range
Inch
±0.040"
±0.040"
±0.040"
±.040"
±.050"
±1.00"
Resolution
Selectable
Features
Standard
Standard
Advanced
Advanced
Advanced
Advanced
Stem
Length
0.46"
1.50"
0.46"
1.50"
0.63"
0.63"
Sale
Price
$345.00
345.00
430.00
430.00
430.00
495.00
0.00001", 0.00002"
0.00005", 0.00001"
0.0002", 0.0005",
0.001"
(
)
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Model
513-304GT
Graduation
.0005"
Range
.03"
Reading
0-15-0
Accuracy
.0005"
Page 36
SOLAR ELECTRONIC ABS
DIGIMATIC INDICATOR
•
Measurement tool with a solar power
source. Ready for use from 40 lux
illumination.
•
Two large function buttons improve
operability.
•
Mitutoyo's unique ABS (Absolute) sensor
automatically restores the last origin
position when the indicator is turned
on. This allows quick-start operation,
which is especially useful in multipoint
measurement.
Model
No.
543-502
543-502B
543-507
543-507B
21EZA199
21EZA150
540774
905338
905409
Range
Inch/Metric
.5"/12.7mm
.5"/12.7mm
.5"/12.7mm
.5"/12.7mm
Resolution
Inch/metric
.00005"/0.001mm
.00005"/0.001mm
.0005"/0.01mm
.0005"/0.01mm
List
Price
$296.00
296.00
190.00
190.00
Sale
Price
$269.95
269.95
169.95
169.95
$ 5.00
21.00
30.00
35.50
42.00
Lifting Lever
Lifting Knob
Lifting Cable
SPC Connecting Cable 40"
SPC Connecting Cable 80"
•
A super capacitor maintains a reserve
of approx. 3.5 hours under low light
conditions.
•
Origin-set +/- direction and inch/mm.
•
Resolution: .0005"/0.01mm or .00005"/
0.001mm
•
Measuring Range: .5"/12.7mm
•
Stem diameter: 3/8" or 8mm available.
•
SPC output provided.
•
Character Height: 9mm
3/8" Stem Diameter - 1.5N or Less Measuring Force
Lifting Lever
Lifting Knob
Lifting Cable
* No.'s 543-502 and 543-507 have Lug Backs.
No.'s 543-502B and 543-507B have Flat Back
Precise
DIAL INDICATOR DEPTH BASE
•
Fits any standard AGD dial indicator with 3/8"
diameter stem.
•
Made of hardened and ground steel for flatness.
•
Black oxide finish.
Model
9228
9229
Base Length
2-1/2"
4"
Price
$23.95
27.95
STANDARD DIAL INDICATORS
•
Accuracy meets or exceeds Federal
Specifications.
•
Easy reading graduations.
•
Thread size: #4-48, metric 2.5mm
•
Stem diameter 3/8", metric 8mm.
•
Adjustment bezel for convenient zero setting
with clamp screw.
•
Lug back supplied except
where noted.
$50.35
1" Range
.001" Grad.
MODEL NO.
20-703-5
Reg. $65.00
* AGD Group 1 • Flat Back Only
The only electronic indicator
that fully conforms with
DIN requirements
•
Dimensions according to DIN 878
•
ABSOLUTE measuring mode.
•
Combined analog/digital display.
•
Mechanical tolerance markers.
•
OPTO-RS data output.
•
Auto-reverse and lockable
keypad.
•
Inspection report included.
•
Swiss made.
DIGICO 205 DIGITAL
ELECTRONIC INDICATOR
Model
No.
39676
Range
In/mm
.5"/12.5mm 0005"/0.01mm
Resolution
In/mm
Measuring
Force (N)
<2.0
List
Price
$265.00
Sale
Price
$235.00
Model
14-653-0*
14-654-8*
20-701-9•
20-704-3
20-700-1
20-703-5
20-361-2
Range
0.250"
0.250"
0.200" 0-100 & 0-50-0
0.500" 0-50 & 0-25-0
0.500" 0-100 & 0-50-0
1.000" 0-100 & 0-50-0
Dial Reading Graduation
0-50-0
1-100
0.001"
0.001"
0.0001"
0.0005"
0.001"
0.001"
Sale
$67.70
67.70
$103.25
56.10
51.45
50.35
$4.65
Steel Ball Contact Point
