Page 4 Penn Tool Co. Precision Tooling 2014 Sale Catalog
P. 4
•
Excel input settings: The input destination (a workbook, sheet, or
cell), cell-fill direction (right or down), cell-fill interval, and other
settings can be specified.
•
Measurement method selection: Any of the following three methods
can be selected: Sequential measurement, batch measurement, or
individual measurement. (For details, see the measurement
examples.)
•
Data input control: Data can be requested, canceled, or skipped by
using mouse buttons, function keys, or foot switch.
•
Character string input by the USB foot switch adapter, USB-FSW:
Any previously specified character string can be input using the foot
switch. Examples: pass or fail
•
Number of units that can be connected (total number for both USB-
ITN and USB-FSW): Up to 20 units can be connected for Windows
Vista or Windows 7, and up to 100 units can be connected for
Windows 2000 or Windows XP. However, the above numbers
might be less depending on the system configuration.
•
Data importation time: About 0.2 to 0.3 seconds per unit. However,
this value differs depending on the connected measuring instruments
and measurement environment.
•
Driver software: The VCP (virtual COM port) drivers for USB-ITN
and USB-FSW are individually recognized using a built-in COM
number.
•
Patent pending (Japan)
Although measurement data can be simply loaded directly into an Excel
spreadsheet by connecting the instrument and input tool to a computer, using the
optional
USB-ITPAK
software enables time-saving operations and procedures that
significantly improve reliability and efficiency.
This setup and data collection software is used to input data from one or more
measuring instruments (connected by way of
USB-ITN
) to any Excel sheet.
(This software package cannot be used with
IT-012U
.)
Measurement data collection software: USB-ITPAK® No. 06ADV386 $295.00
USB INPUT DIRECT
Our USB Input Tool Direct has been streamlined into a range of dedicated
models for each type of measuring instrument
•
Data collection can start immediately after connecting the measuring instrument
to a computer.
•
Because the input tool is automatically recognized as an HID keyboard device
(a standard Windows driver) just by connecting it to a USB port, no special
software is required.
MODEL No.
USB-ITN
$189.95
With 2mm
Cable
Shown: USB Input Tool
Direct for Micrometers
The values displayed on the
measuring instrument can be
sent to the computer just by
pressing the data switch
*Note: Specify which SPC
Measuring Instrument you will be
using for proper connectivity
• The input tool has
been streamlined
by incorporating
the USB function
into the cable
USB-ITPAK
USB Dongle
Software use
requires USB
Dongle
An Integrated Solution for Quality Data Management
MeasurLink 7 Real-Time Standard Edition
is designed for customers who want to
acquire and analyze data in real-time and check variable and attribute inspection to
maximize production and minimize defects.
It has views to allow the user to create Parts, Characteristics with nominal and
tolerance and Traceability lists.
The data collection interface provides real-time graphics for Run charts, Control
charts, Histograms and Statistics.
Standard views include Datasheet (observations and charts), Classic View (chart
windows), and the 2D view (part images with callouts that include charts and
statistical data).Full reporting template functionality is also provided.
Supported data sources include keyboard, RS232 and USB devices.
MEASURELINK 7 REALTIME SPC SOFTWARE
®
MeasurLink 7 Real-Time Professional Edition
enables customers to connect and
acquire data from Mitutoyo Coordinate Measuring Machines, Vision and Form
Measuring Systems via native integration (DDE). ASCII and QMD (xml-based) file
imports are also supported. In addition to all of the features supported by MeasurLink
7 Real-Time Standard Edition, this application also supports data filters. Full reporting
functionality with templates is also provided. Supported data sources include key-
board, RS232C and USB devices, native Mitutoyo integration (DDE), ASCII and QMD
(xml-based) file imports.
MeasurLink 7 Real-Time Professional 3D Edition
is designed for customers who wish
to collect data using the Hoops 3D graphics view. Hoops 3D files can be exported
from most CAD systems and provides the operator with a real view of the part. Camera
angle and position can be saved for each characteristic providing for an intuitive
prompted guided sequencing for the inspector. Supported data sources include
keyboard, RS232C and USB devices, native Mitutoyo integration (DDE), ASCII and
QMD (xml-based) file imports.
Database Management System (DBMS) Requirements
Measurelink 7 ships with a copy of Microsoft®
SQL Server Express Edition 2008 R2, this can be
for a standalone or a workgroup installation.
Measurlink 7 also supports the following Microsoft
SQL Server Versions:
•
Microsoft SQL Server 2008 Standard Edition
•
Microsoft SQL Server 2008 Enterprise Edition
•
Microsoft SQL Server 2005 Workgroup Edition
•
Microsoft SQL Server 2005 Standard Edition
Model
6AAB117
6AAB178
6AAB179
Description
MeasurLink V7.0 Real-Time Standard Edition
MeasurLink V7.0 Real-Time Professional Edition
MeasurLink V7.0 Real-Time Professional 3D Edition 1995.00
List
$1195.00
1795.00
Sale
$1095.00
1695.00
1795.00
•
A measurement data transfer device, multiplexer
MIG-2B and MIG-4A converts digimatic output
measurement data to RS-232C and outputs it to an
external device such as PC.
•
Up to eight/four measuring instruments with the
digimatic output feature can be connected.
•
Units can be daisy-chained to meet any size needs.
•
MIG-4A includes toggle switch for each input.
MULTIPLEXERS - DIGIMATIC/RS-232 INTERFACE UNITS
Model No.
Order No.
Gage Capacity
Dimensions(mm) WxHxD 146 x 150 x 45
Mass (g)
Price
MIG-2B
982-547-10A
8
540
$1325.00
MIG-4A
982-548-10A
4
146 x 150 x 70
710
$1695.00
982-548-10A
Front
982-548-10A
Back
MIG-4A
982-547-10A
Front
982-547-10A
Back
MIG-2B
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 4
Excel input settings: The input destination (a workbook, sheet, or
cell), cell-fill direction (right or down), cell-fill interval, and other
settings can be specified.
•
Measurement method selection: Any of the following three methods
can be selected: Sequential measurement, batch measurement, or
individual measurement. (For details, see the measurement
examples.)
•
Data input control: Data can be requested, canceled, or skipped by
using mouse buttons, function keys, or foot switch.
•
Character string input by the USB foot switch adapter, USB-FSW:
Any previously specified character string can be input using the foot
switch. Examples: pass or fail
•
Number of units that can be connected (total number for both USB-
ITN and USB-FSW): Up to 20 units can be connected for Windows
Vista or Windows 7, and up to 100 units can be connected for
Windows 2000 or Windows XP. However, the above numbers
might be less depending on the system configuration.
•
Data importation time: About 0.2 to 0.3 seconds per unit. However,
this value differs depending on the connected measuring instruments
and measurement environment.
•
Driver software: The VCP (virtual COM port) drivers for USB-ITN
and USB-FSW are individually recognized using a built-in COM
number.
•
Patent pending (Japan)
Although measurement data can be simply loaded directly into an Excel
spreadsheet by connecting the instrument and input tool to a computer, using the
optional
USB-ITPAK
software enables time-saving operations and procedures that
significantly improve reliability and efficiency.
This setup and data collection software is used to input data from one or more
measuring instruments (connected by way of
USB-ITN
) to any Excel sheet.
(This software package cannot be used with
IT-012U
.)
Measurement data collection software: USB-ITPAK® No. 06ADV386 $295.00
USB INPUT DIRECT
Our USB Input Tool Direct has been streamlined into a range of dedicated
models for each type of measuring instrument
•
Data collection can start immediately after connecting the measuring instrument
to a computer.
•
Because the input tool is automatically recognized as an HID keyboard device
(a standard Windows driver) just by connecting it to a USB port, no special
software is required.
MODEL No.
USB-ITN
$189.95
With 2mm
Cable
Shown: USB Input Tool
Direct for Micrometers
The values displayed on the
measuring instrument can be
sent to the computer just by
pressing the data switch
*Note: Specify which SPC
Measuring Instrument you will be
using for proper connectivity
• The input tool has
been streamlined
by incorporating
the USB function
into the cable
USB-ITPAK
USB Dongle
Software use
requires USB
Dongle
An Integrated Solution for Quality Data Management
MeasurLink 7 Real-Time Standard Edition
is designed for customers who want to
acquire and analyze data in real-time and check variable and attribute inspection to
maximize production and minimize defects.
It has views to allow the user to create Parts, Characteristics with nominal and
tolerance and Traceability lists.
The data collection interface provides real-time graphics for Run charts, Control
charts, Histograms and Statistics.
Standard views include Datasheet (observations and charts), Classic View (chart
windows), and the 2D view (part images with callouts that include charts and
statistical data).Full reporting template functionality is also provided.
Supported data sources include keyboard, RS232 and USB devices.
MEASURELINK 7 REALTIME SPC SOFTWARE
®
MeasurLink 7 Real-Time Professional Edition
enables customers to connect and
acquire data from Mitutoyo Coordinate Measuring Machines, Vision and Form
Measuring Systems via native integration (DDE). ASCII and QMD (xml-based) file
imports are also supported. In addition to all of the features supported by MeasurLink
7 Real-Time Standard Edition, this application also supports data filters. Full reporting
functionality with templates is also provided. Supported data sources include key-
board, RS232C and USB devices, native Mitutoyo integration (DDE), ASCII and QMD
(xml-based) file imports.
MeasurLink 7 Real-Time Professional 3D Edition
is designed for customers who wish
to collect data using the Hoops 3D graphics view. Hoops 3D files can be exported
from most CAD systems and provides the operator with a real view of the part. Camera
angle and position can be saved for each characteristic providing for an intuitive
prompted guided sequencing for the inspector. Supported data sources include
keyboard, RS232C and USB devices, native Mitutoyo integration (DDE), ASCII and
QMD (xml-based) file imports.
Database Management System (DBMS) Requirements
Measurelink 7 ships with a copy of Microsoft®
SQL Server Express Edition 2008 R2, this can be
for a standalone or a workgroup installation.
Measurlink 7 also supports the following Microsoft
SQL Server Versions:
•
Microsoft SQL Server 2008 Standard Edition
•
Microsoft SQL Server 2008 Enterprise Edition
•
Microsoft SQL Server 2005 Workgroup Edition
•
Microsoft SQL Server 2005 Standard Edition
Model
6AAB117
6AAB178
6AAB179
Description
MeasurLink V7.0 Real-Time Standard Edition
MeasurLink V7.0 Real-Time Professional Edition
MeasurLink V7.0 Real-Time Professional 3D Edition 1995.00
List
$1195.00
1795.00
Sale
$1095.00
1695.00
1795.00
•
A measurement data transfer device, multiplexer
MIG-2B and MIG-4A converts digimatic output
measurement data to RS-232C and outputs it to an
external device such as PC.
•
Up to eight/four measuring instruments with the
digimatic output feature can be connected.
•
Units can be daisy-chained to meet any size needs.
•
MIG-4A includes toggle switch for each input.
MULTIPLEXERS - DIGIMATIC/RS-232 INTERFACE UNITS
Model No.
Order No.
Gage Capacity
Dimensions(mm) WxHxD 146 x 150 x 45
Mass (g)
Price
MIG-2B
982-547-10A
8
540
$1325.00
MIG-4A
982-548-10A
4
146 x 150 x 70
710
$1695.00
982-548-10A
Front
982-548-10A
Back
MIG-4A
982-547-10A
Front
982-547-10A
Back
MIG-2B
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 4
