Page 400 Penn Tool Co. Precision Tooling 2014 Sale Catalog
P. 400
CNC VERTICAL MILLING MACHINES WITH
Standard Main Features:
•
High speed 3D contouring.
•
English, French, Spanish and Chinese
language display.
•
15" crystal-clear monitor.
•
Easy switch from CNC to manual.
•
PC based with floppy & RS232, LAN ready,
mouse and keyboard.
•
32 bit digital signal processor.
•
Heavy duty servo motors.
•
Turcite "B" coating on ways.
•
High grade casting.
•
High precision C3 class ground ballscrews with
double nuts, pre-loaded, angular contact bearings.
•
Tech support and full one year warranty.
•
Includes manuals and training video tape.
Standard Features:
CNC Computer
•
PC Based.
•
Upgradeable software.
•
3.5" Floppy Disk Drive.
•
Internal solid state hard drive.
•
15" Color LCD display.
•
LAN Ready, RS232, mouse,
keyboard and parallel ports.
•
Digital fiber optics.
•M & G code programing.
• Display • Operation.
• High speed machining.
• Tool library.
• Conventional programing.
• Control operation panel.
CONTROL NO. M400S
(Shown)
AC-3KV-3
w/ M400S
FREE
On Day
On-Site
Training
& Setup
Certified Nationwide Support
Factory trained and certified technicians provide training,
sales, service and support. No matter where you are, we
make sure qualified support is available.
Equipped With
No. M400S Control
Print to Part . .In Minutes
Rapids in Red
Programmed Tool Paths
Cutter Compensated
Toolpaths in Yellow
Bolt Holes in White
Conversational
Programming
Specifications & Options
Click
www.penntoolco.com
For
Controller
or request
CNC Milling Catalog
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 400
The Twister is a full-featured
speed lathe, designed exclu-
sively for quick, single-purpose
operations, such as burr re-
moval, polishing, and gaging
of small parts with hand-held
tools. Rugged and easy to use,
it allows work to be performed
close to CNC lathe. The
Twister's quick setup and rapid
cycle time permits processing
of parts in less time with less
effort.
THE LAST WORD IN PRECISION PARTS FINISHING
SPEED LATHES
Uses 5C Collets
The LT-1BR is a rugged and durable
lathe specificially designed for hand-
held tooling in dry environments.
The LT-2BR includes a heavy duty
heat treated T-slotted base. It accom-
modates all jobs done by the LT-1BR,
as well as more complex jobs that
require an additional tool holder or
special fixture.The rigid headstock
insures minimum deflection and 1/2
horsepower motor delivers 50% more
torque. The base provides a preci-
sion spindle and mounting surface
for the Twister cross slide tool holder
or one of your own design.
MODEL No.
LT-2BR
MODEL No.
LT-1BR
Spindle nose is shrouded for maxi-
mum possible operator safety, the
spindle lock provides fast collet
changes.
Lever action ball bearing
collet closer, with microfine
tension adjustment, for in-
stant chucking and release
of parts.
Large rubber
feet resist move-
ment for por-
table use
Two axis slide shown with
hand lever actuator (Inquire)
VERTICAL BAND SAWS - FLOOR MODELS
•
Large capacity welder.
•
Blade cutter.
•
Blade grinder.
•
Worklamp.
•
Chip blower.
•
Variable speed transmission.
•
Instruction manual and
parts list.
Precision
Made In
Taiwan
Replacement Blades
Models
KV-50
KV-60
KV100
Models
KB-36
KB-45
ISO-9001
Specifications
Speed Range
Horse Power
Power Required
Spindle Max. T.I.T.
Spindle Thru Hole
Spindle Height
Dimensions
Weight
Price
LT-1BR
0-2600 RPM
1/12 HP Cont. 1/12 HP Cont.
120 VAC, 5A
.0015
1.100"
3" w/feet
13"W x 10"H
x 18"D
54 lbs.
$2795.00
LT-2BR
0-2600 RPM
120 VAC, 5A
.0005
1.100"
4.125"
24"W x 14"H
x 18"D
79 lbs.
$3895.00
Model
AC-2V-2
AC-3KV-2
AC-3KVF-2
AC-2V-3
AC-3KV-3
AC-3KVF-3
AC-4KV-3
AC-4KVF-3
Description
2-Axis R-8, 9" x 49" Table, Vari-Speed 3 H.P.
2-Axis R-8, 10" x 54" Table, Vari-Speed 3 H.P.
2-Axis R-8, 10" x 54" Table, Inverter Drive 3 H.P.
3-Axis R-8, 9" x 49" Table, Vari-Speed 3 H.P.
3-Axis R-8, 10" x 54" Table, Vari-Speed 3 H.P.
3-Axis R-8, 10" x 54" Table, Inverter Drive 3 H.P.
3-Axis Cat40, 10" x 54" Table, Vari-Speed 5 H.P.
3-Axis Cat40, 10" x 54" Table, Inverter Drive 5 H.P.
Sale
$22,995.00
24,995.00
26,995.00
$24,995.00
26,995.00
27,995.00
27,995.00
29,995.00
Optional Features
High Variable Speed 0 to 3500 RPM
Ultra Low Variable Speed 0 to 800 RPM
Twin Foot Switch Forward & Reverse
Variable Speed Foot Switch
1-Axis Cross Slide
Dual Actuator
Our cross slide can be equipped with an .850" hand lever actuator,
a natural for part-off burr removal or chamfering operations
Tailstock
Price
$ 200.00
100.00
250.00
400.00
$1350.00
900.00
$1850.00
Model
LTH
LYU
TF
VF
LT-805
LT-810
LT-815
Model
2016 0007
2016 0012
2016 0039
2016 0111
2016 0153
Description
100' x 1/8", .025" 18 TPI
100' x 3/16", .025" 4 TPI
100' x 1/4", .025" 10 TPI
100' x 1/2", .025" 14 TPI
100' x 5/8", .032" 10 TPI
Price
$ 90.09
86.06
74.80
81.23
113.40
Model
Cutting Throat Depth
Capacity Max. Work Height
Table Size
Table Inclination(2-Ways)
Table Stroke
Saw Blade Length
Saw Blade Width
Saw Blade Speeds
Butt Welder Capacity
Drive Motor
Net Weight (approx.)
Gross Weight (approx.)
Measurement (LxWxH)
Sale Price
KB-36
14"
9-1/16"
19-1/2" x 15-1/4"
15"
111-13/16
1/8" - 5/8"
65-295 FPM
2.4KVA 1/8"-5/8"
1HP, 220V, 1Ph
551 lbs.
683 lbs.
37-3/16x22x72-13/16" 43-11/16x26x79-1/4" 57x43-5/16x84-5/16" 62x43-5/16x84-5/16" 75-5/8x43-5/16x84-5/16"
$2495.00
KB-45
17-15/16"
10-1/16"
23-1/2" x 19-1/2"
15"
137-3/8
1/8" - 5/8"
85-375 FPM
2.4KVA 1/8"-5/8"
1HP, 220V, 3Ph
660 lbs.
814 lbs.
$2995.00
KV-50
20-1/2"
12-3/8"
26" x 27-1/2"
L5" R15"
13-25/32"
153
3-20
4.2KVA 1/8"-13/16" 4.2KVA 1/8"-13/16"
2HP, 220V, 3Ph
650 lbs.
770 lbs.
$4295.00
KV-60
23-5/8"
11-13/16"
26" x 27-1/2"
8-5/8"x19-1/2"
L5" R15"
13-25/32"
156-5/16
3-20
2HP, 220V, 3Ph
850 lbs.
970 lbs.
$4995.00
KV-100
39-3/8"
11-13/16"
26" x 27-1/2"
17-3/4"x19-1/2"
L5" R15"
13-25/32"
178-5/8
3-20
4.2KVA 1/8"-13/16"
2HP, 220V, 3Ph
950 lbs.
1070 lbs.
$5995.00
Low 65-280 FPM High 400-1640 FPM
Standard Main Features:
•
High speed 3D contouring.
•
English, French, Spanish and Chinese
language display.
•
15" crystal-clear monitor.
•
Easy switch from CNC to manual.
•
PC based with floppy & RS232, LAN ready,
mouse and keyboard.
•
32 bit digital signal processor.
•
Heavy duty servo motors.
•
Turcite "B" coating on ways.
•
High grade casting.
•
High precision C3 class ground ballscrews with
double nuts, pre-loaded, angular contact bearings.
•
Tech support and full one year warranty.
•
Includes manuals and training video tape.
Standard Features:
CNC Computer
•
PC Based.
•
Upgradeable software.
•
3.5" Floppy Disk Drive.
•
Internal solid state hard drive.
•
15" Color LCD display.
•
LAN Ready, RS232, mouse,
keyboard and parallel ports.
•
Digital fiber optics.
•M & G code programing.
• Display • Operation.
• High speed machining.
• Tool library.
• Conventional programing.
• Control operation panel.
CONTROL NO. M400S
(Shown)
AC-3KV-3
w/ M400S
FREE
On Day
On-Site
Training
& Setup
Certified Nationwide Support
Factory trained and certified technicians provide training,
sales, service and support. No matter where you are, we
make sure qualified support is available.
Equipped With
No. M400S Control
Print to Part . .In Minutes
Rapids in Red
Programmed Tool Paths
Cutter Compensated
Toolpaths in Yellow
Bolt Holes in White
Conversational
Programming
Specifications & Options
Click
www.penntoolco.com
For
Controller
or request
CNC Milling Catalog
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 400
The Twister is a full-featured
speed lathe, designed exclu-
sively for quick, single-purpose
operations, such as burr re-
moval, polishing, and gaging
of small parts with hand-held
tools. Rugged and easy to use,
it allows work to be performed
close to CNC lathe. The
Twister's quick setup and rapid
cycle time permits processing
of parts in less time with less
effort.
THE LAST WORD IN PRECISION PARTS FINISHING
SPEED LATHES
Uses 5C Collets
The LT-1BR is a rugged and durable
lathe specificially designed for hand-
held tooling in dry environments.
The LT-2BR includes a heavy duty
heat treated T-slotted base. It accom-
modates all jobs done by the LT-1BR,
as well as more complex jobs that
require an additional tool holder or
special fixture.The rigid headstock
insures minimum deflection and 1/2
horsepower motor delivers 50% more
torque. The base provides a preci-
sion spindle and mounting surface
for the Twister cross slide tool holder
or one of your own design.
MODEL No.
LT-2BR
MODEL No.
LT-1BR
Spindle nose is shrouded for maxi-
mum possible operator safety, the
spindle lock provides fast collet
changes.
Lever action ball bearing
collet closer, with microfine
tension adjustment, for in-
stant chucking and release
of parts.
Large rubber
feet resist move-
ment for por-
table use
Two axis slide shown with
hand lever actuator (Inquire)
VERTICAL BAND SAWS - FLOOR MODELS
•
Large capacity welder.
•
Blade cutter.
•
Blade grinder.
•
Worklamp.
•
Chip blower.
•
Variable speed transmission.
•
Instruction manual and
parts list.
Precision
Made In
Taiwan
Replacement Blades
Models
KV-50
KV-60
KV100
Models
KB-36
KB-45
ISO-9001
Specifications
Speed Range
Horse Power
Power Required
Spindle Max. T.I.T.
Spindle Thru Hole
Spindle Height
Dimensions
Weight
Price
LT-1BR
0-2600 RPM
1/12 HP Cont. 1/12 HP Cont.
120 VAC, 5A
.0015
1.100"
3" w/feet
13"W x 10"H
x 18"D
54 lbs.
$2795.00
LT-2BR
0-2600 RPM
120 VAC, 5A
.0005
1.100"
4.125"
24"W x 14"H
x 18"D
79 lbs.
$3895.00
Model
AC-2V-2
AC-3KV-2
AC-3KVF-2
AC-2V-3
AC-3KV-3
AC-3KVF-3
AC-4KV-3
AC-4KVF-3
Description
2-Axis R-8, 9" x 49" Table, Vari-Speed 3 H.P.
2-Axis R-8, 10" x 54" Table, Vari-Speed 3 H.P.
2-Axis R-8, 10" x 54" Table, Inverter Drive 3 H.P.
3-Axis R-8, 9" x 49" Table, Vari-Speed 3 H.P.
3-Axis R-8, 10" x 54" Table, Vari-Speed 3 H.P.
3-Axis R-8, 10" x 54" Table, Inverter Drive 3 H.P.
3-Axis Cat40, 10" x 54" Table, Vari-Speed 5 H.P.
3-Axis Cat40, 10" x 54" Table, Inverter Drive 5 H.P.
Sale
$22,995.00
24,995.00
26,995.00
$24,995.00
26,995.00
27,995.00
27,995.00
29,995.00
Optional Features
High Variable Speed 0 to 3500 RPM
Ultra Low Variable Speed 0 to 800 RPM
Twin Foot Switch Forward & Reverse
Variable Speed Foot Switch
1-Axis Cross Slide
Dual Actuator
Our cross slide can be equipped with an .850" hand lever actuator,
a natural for part-off burr removal or chamfering operations
Tailstock
Price
$ 200.00
100.00
250.00
400.00
$1350.00
900.00
$1850.00
Model
LTH
LYU
TF
VF
LT-805
LT-810
LT-815
Model
2016 0007
2016 0012
2016 0039
2016 0111
2016 0153
Description
100' x 1/8", .025" 18 TPI
100' x 3/16", .025" 4 TPI
100' x 1/4", .025" 10 TPI
100' x 1/2", .025" 14 TPI
100' x 5/8", .032" 10 TPI
Price
$ 90.09
86.06
74.80
81.23
113.40
Model
Cutting Throat Depth
Capacity Max. Work Height
Table Size
Table Inclination(2-Ways)
Table Stroke
Saw Blade Length
Saw Blade Width
Saw Blade Speeds
Butt Welder Capacity
Drive Motor
Net Weight (approx.)
Gross Weight (approx.)
Measurement (LxWxH)
Sale Price
KB-36
14"
9-1/16"
19-1/2" x 15-1/4"
15"
111-13/16
1/8" - 5/8"
65-295 FPM
2.4KVA 1/8"-5/8"
1HP, 220V, 1Ph
551 lbs.
683 lbs.
37-3/16x22x72-13/16" 43-11/16x26x79-1/4" 57x43-5/16x84-5/16" 62x43-5/16x84-5/16" 75-5/8x43-5/16x84-5/16"
$2495.00
KB-45
17-15/16"
10-1/16"
23-1/2" x 19-1/2"
15"
137-3/8
1/8" - 5/8"
85-375 FPM
2.4KVA 1/8"-5/8"
1HP, 220V, 3Ph
660 lbs.
814 lbs.
$2995.00
KV-50
20-1/2"
12-3/8"
26" x 27-1/2"
L5" R15"
13-25/32"
153
3-20
4.2KVA 1/8"-13/16" 4.2KVA 1/8"-13/16"
2HP, 220V, 3Ph
650 lbs.
770 lbs.
$4295.00
KV-60
23-5/8"
11-13/16"
26" x 27-1/2"
8-5/8"x19-1/2"
L5" R15"
13-25/32"
156-5/16
3-20
2HP, 220V, 3Ph
850 lbs.
970 lbs.
$4995.00
KV-100
39-3/8"
11-13/16"
26" x 27-1/2"
17-3/4"x19-1/2"
L5" R15"
13-25/32"
178-5/8
3-20
4.2KVA 1/8"-13/16"
2HP, 220V, 3Ph
950 lbs.
1070 lbs.
$5995.00
Low 65-280 FPM High 400-1640 FPM
