Page 218 Penn Tool Co. Precision Tooling Buyer's Guide 2019
P. 218
216
R
Standard Milling & Drilling Table
Low silhouette table for light-duty work. Table fastens readily
to the machine by means of a central base bolt.
• Adjustable gibs.
• 0.100" per dial revolution.
• Rotatable and graduated 360°, locks by two
set screws and internal locking shoes.
• 4 ⁄ " diameter base with integral 1 ⁄ " long
5
8
1
8
base bolt for mounting.
TABLE
TRAVEL TRAVEL WEIGHT
PART
W x L
HEIGHT
LONG
CROSS
LBS.
NUMBER
PRICE
7" x 7"
4 ⁄ " 1
4
5"
5"
18
76-003-3
$296.60
76-003-3
R
Compound Slide
Milling & Drilling Table
Table has a heavy-duty rugged slide used in all kinds of positioning,
milling, drilling, microscope viewing and staging. Adjustable gibs
for heavy loads.
• Locking screws allow table to lock in place.
• "U" slots for bolts up to ⁄ ".
5
8
• Cross travel: 7 ⁄ ".
1
2
• Long travel: 11"
TABLE
BASE
WEIGHT PART
W x L
HEIGHT
W x L
T-SLOTS
LBS.
NUMBER
PRICE
6" x 19"
5"
8 x 10 ⁄ "
1
2
9
⁄ "
16
56
76-004-1
$307.15
76-004-1
R
Tilting Angle Tables
w/Swivel Bases
Save Set-Up Time
• Sturdy and rugged machined casting.
• Crank handle and worm gear swivels
table 45° each side of vertical.
• Vernier on table calibrated in degrees.
• Table features 3 T-slots.
• 360° swivel base vernier calibrated in degrees.
Approximate Dimensions
OVERALL
WEIGHT
PART
WIDTH *
LENGTH
HEIGHT T-SLOT
LBS.
NUMBER
PRICE
8.7"
10"
5.3"
0.393"
26
76-011-6
$1,395.65
12.0"
14"
7.3"
0.472"
88
76-012-4
1,939.70
17.2"
19"
9.4"
0.630"
221
76-013-2
†
2,329.45
† Truck shipment.
76-013-2
67-026-5
R
Super Spacers
• Reversible jaws.
• 360° graduated ring.
• 24 position master index plate
with six masking plates included
for rapid indexing for divisions
of 2, 3, 4, 6, 8 and 12.
• 10 second vernier.
• Chuck and faceplate included.
• Indexing accuracy: 3 minute max.
• Indexing repeatability: 30 seconds.
• Squareness base to chuck: 0.0012" max.
• Parallelism of chuck face to base: 0.0008".
• Concentricity of mounting flange: 0.0008".
• Shipped via truck collect.
CENTER
FACE
CHUCK
WT.
PART
SIZE HEIGHT
PLATE CENT. HOLE LBS.
NUMBER
PRICE E
8" 6.100"
10"
2.25
166
67-026-5
$2,378.15
67-026-5
24 Position Spacers
Common Features
• Direct indexing with 24 position master plate and
6 masking plates for 2, 3, 4, 6, 8 and 12 positions.
• Spindle lock for extra rigidity.
• 360° graduation with adjustable zero mark.
• Accurate to 5 minutes, repeatability 30 sec.
• 6 ⁄ " dia. 3-jaw chuck with reversible top jaws.
1 2
•
5
⁄ " key ways for alignment keys.
8
• Horizontal height: 6.14".
• Vertical center height: 5.12".
• Thru hole diameter: 1.73".
24 Position Super Spacer
• 8" diameter face plate included.
• 90:1 ratio worm gear with graduated
micrometer drum for use as a rotary table.
• Adjustable vernier reading on micrometer drum 10 seconds.
• Horizontal height: 7.02".
• Weight: 105 lbs.
• Includes Common Features noted above.
DESCRIPTION
PART NO.
PRICE
24 Position Super Spacer
51-206-1
$1,901.50
24 Position Simple Spacer
• Horizontal height 6.14".
• Includes Common Features noted above.
• Weight: 64 lbs.
DESCRIPTION
PART NO.
PRICE
24 Position Spacer
51-250-9
$1,026.80
51-206-1
51-250-9
• Solid cast iron body.
• Base dimensions 3 ⁄ " x 5 ⁄ ".x 5 ⁄ ".
1 4
1 1
8 8
• Center travel 1".
• Center height 4" —
adjustable 0.08".
• Weight 6 lbs.
• Ideal for use with
Speed-Dex Indexing Fixtures.
DESCRIPTION
PART NO.
PRICE
Adjustable Tailstock
70-189-6
$162.75
R
Adjustable
2MT Tailstock ck
⁄ ⁄
xtures.
70-189-6
R
Standard Milling & Drilling Table
Low silhouette table for light-duty work. Table fastens readily
to the machine by means of a central base bolt.
• Adjustable gibs.
• 0.100" per dial revolution.
• Rotatable and graduated 360°, locks by two
set screws and internal locking shoes.
• 4 ⁄ " diameter base with integral 1 ⁄ " long
5
8
1
8
base bolt for mounting.
TABLE
TRAVEL TRAVEL WEIGHT
PART
W x L
HEIGHT
LONG
CROSS
LBS.
NUMBER
PRICE
7" x 7"
4 ⁄ " 1
4
5"
5"
18
76-003-3
$296.60
76-003-3
R
Compound Slide
Milling & Drilling Table
Table has a heavy-duty rugged slide used in all kinds of positioning,
milling, drilling, microscope viewing and staging. Adjustable gibs
for heavy loads.
• Locking screws allow table to lock in place.
• "U" slots for bolts up to ⁄ ".
5
8
• Cross travel: 7 ⁄ ".
1
2
• Long travel: 11"
TABLE
BASE
WEIGHT PART
W x L
HEIGHT
W x L
T-SLOTS
LBS.
NUMBER
PRICE
6" x 19"
5"
8 x 10 ⁄ "
1
2
9
⁄ "
16
56
76-004-1
$307.15
76-004-1
R
Tilting Angle Tables
w/Swivel Bases
Save Set-Up Time
• Sturdy and rugged machined casting.
• Crank handle and worm gear swivels
table 45° each side of vertical.
• Vernier on table calibrated in degrees.
• Table features 3 T-slots.
• 360° swivel base vernier calibrated in degrees.
Approximate Dimensions
OVERALL
WEIGHT
PART
WIDTH *
LENGTH
HEIGHT T-SLOT
LBS.
NUMBER
PRICE
8.7"
10"
5.3"
0.393"
26
76-011-6
$1,395.65
12.0"
14"
7.3"
0.472"
88
76-012-4
1,939.70
17.2"
19"
9.4"
0.630"
221
76-013-2
†
2,329.45
† Truck shipment.
76-013-2
67-026-5
R
Super Spacers
• Reversible jaws.
• 360° graduated ring.
• 24 position master index plate
with six masking plates included
for rapid indexing for divisions
of 2, 3, 4, 6, 8 and 12.
• 10 second vernier.
• Chuck and faceplate included.
• Indexing accuracy: 3 minute max.
• Indexing repeatability: 30 seconds.
• Squareness base to chuck: 0.0012" max.
• Parallelism of chuck face to base: 0.0008".
• Concentricity of mounting flange: 0.0008".
• Shipped via truck collect.
CENTER
FACE
CHUCK
WT.
PART
SIZE HEIGHT
PLATE CENT. HOLE LBS.
NUMBER
PRICE E
8" 6.100"
10"
2.25
166
67-026-5
$2,378.15
67-026-5
24 Position Spacers
Common Features
• Direct indexing with 24 position master plate and
6 masking plates for 2, 3, 4, 6, 8 and 12 positions.
• Spindle lock for extra rigidity.
• 360° graduation with adjustable zero mark.
• Accurate to 5 minutes, repeatability 30 sec.
• 6 ⁄ " dia. 3-jaw chuck with reversible top jaws.
1 2
•
5
⁄ " key ways for alignment keys.
8
• Horizontal height: 6.14".
• Vertical center height: 5.12".
• Thru hole diameter: 1.73".
24 Position Super Spacer
• 8" diameter face plate included.
• 90:1 ratio worm gear with graduated
micrometer drum for use as a rotary table.
• Adjustable vernier reading on micrometer drum 10 seconds.
• Horizontal height: 7.02".
• Weight: 105 lbs.
• Includes Common Features noted above.
DESCRIPTION
PART NO.
PRICE
24 Position Super Spacer
51-206-1
$1,901.50
24 Position Simple Spacer
• Horizontal height 6.14".
• Includes Common Features noted above.
• Weight: 64 lbs.
DESCRIPTION
PART NO.
PRICE
24 Position Spacer
51-250-9
$1,026.80
51-206-1
51-250-9
• Solid cast iron body.
• Base dimensions 3 ⁄ " x 5 ⁄ ".x 5 ⁄ ".
1 4
1 1
8 8
• Center travel 1".
• Center height 4" —
adjustable 0.08".
• Weight 6 lbs.
• Ideal for use with
Speed-Dex Indexing Fixtures.
DESCRIPTION
PART NO.
PRICE
Adjustable Tailstock
70-189-6
$162.75
R
Adjustable
2MT Tailstock ck
⁄ ⁄
xtures.
70-189-6
