Page 247 Penn Tool Co. Precision Tooling Buyer's Guide 2019
P. 247
245
Drawbars
• O-ring on shaft prevents spacer from falling into mill head.
• Made from cold rolled steel with oxide finish.
•
7
⁄ "-20 thread. Furnished in plastic case.
16
DESCRIPTION
PART NO.
PRICE
J2, Long
58-804-6
$32.95
J1, Short
58-801-2
26.75
BRIDGEPORT J2, Long
(Standard BRIDGEPORT Mills)
BRIDGEPORT J1, Short
R
Drawbar Hammer
•
3
⁄ " Socket for loosening drawbar.
4
• If spindle taper is locked to collet taper, a simple tap
with brass hammer head will break them loose.
• Socket end fits other ⁄ " bolts on vertical mills.
3
4
DESCRIPTION
PART NO.
PRICE
Drawbar Hammer
57-925-0
$29.95
57-925-0
• DEEPOL offers a fast way
to measure the true quill
travel on your Bridgeport
Mill very accurately by reading
it on a travel indicator.
• Installed in seconds, no holes
to be drilled.
• Covers the full 5" quill travel.
• Does not interfere with the fine e
feed Bridgeport wheel.
• Saves time. Can be mounted
and removed by single
clamping screw.
DESCRIPTION
PART NO.
PRICE
Deepol, without indicator
98-207-4
$118.35
DEEPOL
Positive Depth
Control for
BRIDGEPORT Mills
J & 2J Heads
g
Dial Indicator,
sold separately.
QUILLMATE
Positive Vertical Quill Control
for All BRIDGEPORT Mills
• Solves the costly adjustment depth problems
of the work spindle for boring, milling, drilling, etc.
• Installed in seconds. No holes to be drilled.
• Speeds operations and eliminates rejects.
• Fast positioning reference rod 5.000" ±0.0005",
3
⁄ " dia. hardened and ground, covers entire quill travel.
8
• Self aligning indicator holders, universal base
and precision stop ring included.
DESCRIPTION
PART NO.
PRICE
Quillmate, Standard
98-200-9
$155.90
Quillmate, Super — Includes 1 additional
stop ring and 2", 3" and 4" reference rods
98-203-3
194.85
Shown with
Dial Indicator
Not included
Spider Handle
For All BRIDGEPORT Mills
• Replaces conventional Bridgeport
handle in seconds.
• Particularly suitable for drilling.
• Heavy duty construction.
DESCRIPTION
PART NO.
PRICE
Spider Handle
98-215-7
$40.95
98-215-7
58-801-2
58-804-6
Right Angle Attachments
for Bridgeport Mills
Milling Arbor Support
• Allows the use of the R-8 milling arbor to convert a vertical
milling machine into a horizontal milling machine.
R-8 Right Angle Attachment
• Designed to simplify right angle work.
• Aligning pads for quick positioning.
• Accommodates R-8 collets.
• Body is made of ductile iron and uses sealed, high speed
bearing to assure dependability and durability.
• Uses precision spiral bevel gears that are heat treated
and ground alloy steel.
1" R-8 Milling Machine Arbor
• Made of heat treated and ground alloy steel.
• Spacers are ground parallel and square with the bore.
• Fits Import arbor support and Dorian arbor support
with 1 ⁄ " dia. bearing.
5 8
• 8" spindle, 1 ⁄ " bushing dia.
9
16
Set includes:
– Right angle attachment head
— Milling arbor
— Collet locking (stud)
— Arbor support
— Wooden case for right angle head
DESCRIPTION
PART NO.
PRICE
Right Angle Head
67-233-7
$942.20
R-8 Arbor
67-234-5
350.85
Arbor Support w/50° Dovetail Angle
67-235-2
350.85
Right Angle Attachment Set
67-236-0
1,265.75
Note: A special Draw Bar is required when using right angle attachment.
t
ical
ed
Drawbars
• O-ring on shaft prevents spacer from falling into mill head.
• Made from cold rolled steel with oxide finish.
•
7
⁄ "-20 thread. Furnished in plastic case.
16
DESCRIPTION
PART NO.
PRICE
J2, Long
58-804-6
$32.95
J1, Short
58-801-2
26.75
BRIDGEPORT J2, Long
(Standard BRIDGEPORT Mills)
BRIDGEPORT J1, Short
R
Drawbar Hammer
•
3
⁄ " Socket for loosening drawbar.
4
• If spindle taper is locked to collet taper, a simple tap
with brass hammer head will break them loose.
• Socket end fits other ⁄ " bolts on vertical mills.
3
4
DESCRIPTION
PART NO.
PRICE
Drawbar Hammer
57-925-0
$29.95
57-925-0
• DEEPOL offers a fast way
to measure the true quill
travel on your Bridgeport
Mill very accurately by reading
it on a travel indicator.
• Installed in seconds, no holes
to be drilled.
• Covers the full 5" quill travel.
• Does not interfere with the fine e
feed Bridgeport wheel.
• Saves time. Can be mounted
and removed by single
clamping screw.
DESCRIPTION
PART NO.
PRICE
Deepol, without indicator
98-207-4
$118.35
DEEPOL
Positive Depth
Control for
BRIDGEPORT Mills
J & 2J Heads
g
Dial Indicator,
sold separately.
QUILLMATE
Positive Vertical Quill Control
for All BRIDGEPORT Mills
• Solves the costly adjustment depth problems
of the work spindle for boring, milling, drilling, etc.
• Installed in seconds. No holes to be drilled.
• Speeds operations and eliminates rejects.
• Fast positioning reference rod 5.000" ±0.0005",
3
⁄ " dia. hardened and ground, covers entire quill travel.
8
• Self aligning indicator holders, universal base
and precision stop ring included.
DESCRIPTION
PART NO.
PRICE
Quillmate, Standard
98-200-9
$155.90
Quillmate, Super — Includes 1 additional
stop ring and 2", 3" and 4" reference rods
98-203-3
194.85
Shown with
Dial Indicator
Not included
Spider Handle
For All BRIDGEPORT Mills
• Replaces conventional Bridgeport
handle in seconds.
• Particularly suitable for drilling.
• Heavy duty construction.
DESCRIPTION
PART NO.
PRICE
Spider Handle
98-215-7
$40.95
98-215-7
58-801-2
58-804-6
Right Angle Attachments
for Bridgeport Mills
Milling Arbor Support
• Allows the use of the R-8 milling arbor to convert a vertical
milling machine into a horizontal milling machine.
R-8 Right Angle Attachment
• Designed to simplify right angle work.
• Aligning pads for quick positioning.
• Accommodates R-8 collets.
• Body is made of ductile iron and uses sealed, high speed
bearing to assure dependability and durability.
• Uses precision spiral bevel gears that are heat treated
and ground alloy steel.
1" R-8 Milling Machine Arbor
• Made of heat treated and ground alloy steel.
• Spacers are ground parallel and square with the bore.
• Fits Import arbor support and Dorian arbor support
with 1 ⁄ " dia. bearing.
5 8
• 8" spindle, 1 ⁄ " bushing dia.
9
16
Set includes:
– Right angle attachment head
— Milling arbor
— Collet locking (stud)
— Arbor support
— Wooden case for right angle head
DESCRIPTION
PART NO.
PRICE
Right Angle Head
67-233-7
$942.20
R-8 Arbor
67-234-5
350.85
Arbor Support w/50° Dovetail Angle
67-235-2
350.85
Right Angle Attachment Set
67-236-0
1,265.75
Note: A special Draw Bar is required when using right angle attachment.
t
ical
ed
