Page 275 Penn Tool Co. Precision Tooling Buyer's Guide 2019
P. 275
273
Mighty Mini Stainless Steel
Oil Skimmers
• The most cost effective way to remove oil and grease from water.
• “Mighty Mini" designed for 12" to 24" tank depth.
• Belt and pulley can fit through a 2" diameter bung hole.
• Depth is measured from the bottom of the mounting
base to the bottom of the tail pulley.
• Fan cooled motor.
• Both sides of belt are wiped for more efficiency.
• Spring loaded stabilizer bar.
• 3 foot clear discharge hose and clamp.
• Mounting bracket not included.
BELT
OIL REMOVAL
MAX.
PART
SIZE
RATE
DEPTH
NUMBER
PRICE
1"
1 Gal./hr.
12"
65-692-6
$613.15
1"
1 Gal./hr.
24"
65-693-4
613.15
2"
2 Gal./hr.
24"
65-694-2
870.80
Accessories
DESCRIPTION
PART NO.
PRICE
1
⁄ Gal. Cap. Decanter
2
65-695-9
$305.85
Hose kit for Decanter (ODMIDO)
65-696-7
54.95
Mounting Bracket
65-698-3
89.50
Replacement Belt for 65-692-6
06-631-6
109.70
Replacement Belt for 65-693-4
06-633-2
109.70
Replacement Belt for 65-694-2
06-632-4
158.15
65-692-6
Cold Air Guns
Adjustable Cold Air Gun
• Safe on metals, plastics, glass and ceramic parts.
DESCRIPTION
PART NO.
PRICE
Adjustable Cold Air Gun
61-965-0
$436.45
Adjustable Cold Air Gun w/Magnetic Base
• Uses only filtered, factory compressed air (80-100 PSIG)
to produce cold air for spot cooling.
• The internal configuration reduces air temperature by 100° F below inlet
temperature. Can be used to cool various machining operations without
the use of liquid coolant.
• No Freon - No Moving Parts - Virtually Maintenance Free.
• Built in muffler.
• Meets OSHA noise specification.
• Includes magnetic base.
DESCRIPTION
PART NO.
PRICE
Adj. Cold Air Gun w/Mag. Base
61-967-6
$570.35
Dual-Point Nozzle for Adj. Air Gun
61-968-4
44.75
61-967-6
Panapress
• Ideal for pressing bearings, sleeves or collars,
forming and assembly of small parts, staking,
riveting, broaching, etc.
• Weighs only 6 lbs. Stands 7" and is
built to exert pressure up to ⁄ ton.
1 4
• Arbor and table-plate are die-cast
of high strength Zamak III.
• Operating mechanism of hardened and ground steel.
• Four adjustable Nylon gibs for precise ram control.
Gibs are self-lubricating and wear resistant.
• Throat depth 2 ⁄ ". Vertical capacity 3 ⁄ ".
1 8
1 2
• Base dimensions 3 ⁄ " x 7".
5 8
• Ram size ⁄ " sq. x 6 ⁄ ".
3 4
1 4
DESCRIPTION
PART NO.
PRICE
Panapress
70-909-7
$219.95
70-909-7
6" x 48" Belt
and 9" Disc Sander
• Quick belt adjustment.
• Belt locks at any angle from horizontal to vertical.
• Table tilts 45° and has a miter gage.
•
3
⁄ HP, 115V, 1 Ph. 1350 SFPM.
4
• Approx. weight 130 lbs.
• Complete with stand.
• Truck collect.
DESCRIPTION
PART NO.
PRICE
6" x 48" Belt
and 9" Disc Sander
90-189-2
$501.15
90-189-2
Combo
6" x 48" Belt
& 10" Disc
Finishing Machine
Versitile, Economical
Workshop Tool
• 1650 SFPM belt speed/1750 RPM
disc speed.
• 1 HP, 115V, single-phase motor.
• Belt operates in horizontal
or vertical position.
• 2 cast-iron tilt tables.
• Miter gage standards.
• Wt. 170 lbs.
• Truck collect.
10" PSA Discs
• 80 grit.
DESCRIPTION
PART NO.
PRICE PER 100
Combo Belt & Disc
Finishing Machine
90-191-8
$903.80
10" PSA Discs
87-835-5
288.35
PER
100
90-191-8
Mighty Mini Stainless Steel
Oil Skimmers
• The most cost effective way to remove oil and grease from water.
• “Mighty Mini" designed for 12" to 24" tank depth.
• Belt and pulley can fit through a 2" diameter bung hole.
• Depth is measured from the bottom of the mounting
base to the bottom of the tail pulley.
• Fan cooled motor.
• Both sides of belt are wiped for more efficiency.
• Spring loaded stabilizer bar.
• 3 foot clear discharge hose and clamp.
• Mounting bracket not included.
BELT
OIL REMOVAL
MAX.
PART
SIZE
RATE
DEPTH
NUMBER
PRICE
1"
1 Gal./hr.
12"
65-692-6
$613.15
1"
1 Gal./hr.
24"
65-693-4
613.15
2"
2 Gal./hr.
24"
65-694-2
870.80
Accessories
DESCRIPTION
PART NO.
PRICE
1
⁄ Gal. Cap. Decanter
2
65-695-9
$305.85
Hose kit for Decanter (ODMIDO)
65-696-7
54.95
Mounting Bracket
65-698-3
89.50
Replacement Belt for 65-692-6
06-631-6
109.70
Replacement Belt for 65-693-4
06-633-2
109.70
Replacement Belt for 65-694-2
06-632-4
158.15
65-692-6
Cold Air Guns
Adjustable Cold Air Gun
• Safe on metals, plastics, glass and ceramic parts.
DESCRIPTION
PART NO.
PRICE
Adjustable Cold Air Gun
61-965-0
$436.45
Adjustable Cold Air Gun w/Magnetic Base
• Uses only filtered, factory compressed air (80-100 PSIG)
to produce cold air for spot cooling.
• The internal configuration reduces air temperature by 100° F below inlet
temperature. Can be used to cool various machining operations without
the use of liquid coolant.
• No Freon - No Moving Parts - Virtually Maintenance Free.
• Built in muffler.
• Meets OSHA noise specification.
• Includes magnetic base.
DESCRIPTION
PART NO.
PRICE
Adj. Cold Air Gun w/Mag. Base
61-967-6
$570.35
Dual-Point Nozzle for Adj. Air Gun
61-968-4
44.75
61-967-6
Panapress
• Ideal for pressing bearings, sleeves or collars,
forming and assembly of small parts, staking,
riveting, broaching, etc.
• Weighs only 6 lbs. Stands 7" and is
built to exert pressure up to ⁄ ton.
1 4
• Arbor and table-plate are die-cast
of high strength Zamak III.
• Operating mechanism of hardened and ground steel.
• Four adjustable Nylon gibs for precise ram control.
Gibs are self-lubricating and wear resistant.
• Throat depth 2 ⁄ ". Vertical capacity 3 ⁄ ".
1 8
1 2
• Base dimensions 3 ⁄ " x 7".
5 8
• Ram size ⁄ " sq. x 6 ⁄ ".
3 4
1 4
DESCRIPTION
PART NO.
PRICE
Panapress
70-909-7
$219.95
70-909-7
6" x 48" Belt
and 9" Disc Sander
• Quick belt adjustment.
• Belt locks at any angle from horizontal to vertical.
• Table tilts 45° and has a miter gage.
•
3
⁄ HP, 115V, 1 Ph. 1350 SFPM.
4
• Approx. weight 130 lbs.
• Complete with stand.
• Truck collect.
DESCRIPTION
PART NO.
PRICE
6" x 48" Belt
and 9" Disc Sander
90-189-2
$501.15
90-189-2
Combo
6" x 48" Belt
& 10" Disc
Finishing Machine
Versitile, Economical
Workshop Tool
• 1650 SFPM belt speed/1750 RPM
disc speed.
• 1 HP, 115V, single-phase motor.
• Belt operates in horizontal
or vertical position.
• 2 cast-iron tilt tables.
• Miter gage standards.
• Wt. 170 lbs.
• Truck collect.
10" PSA Discs
• 80 grit.
DESCRIPTION
PART NO.
PRICE PER 100
Combo Belt & Disc
Finishing Machine
90-191-8
$903.80
10" PSA Discs
87-835-5
288.35
PER
100
90-191-8
