Page 300 Penn Tool Co. Precision Tooling Buyer's Guide 2019
P. 300
298
Economy Demagnetizer
• 110 Volts, On-Off switch.
• Quickly demagnetizes tools, drills, punches,
dies, etc. by sliding the item across surface.
• 6.75" long, 4.5" wide, 5.0" high.
• Weight: 11 lbs.
DESCRIPTION
PART NO.
PRICE
Economy Demagnetizer
51-168-3
$88.15
51-168-3
Universal CNC Bar Puller
• Fits most CNC machines to fully utilize automatic
machining cycles with round, hex, square and flat bare stock.
• Two models with different capacities, Mini Omni ⁄ " - 1 ⁄ "
3
16
1 8
and Omni ⁄ " – 3"
3
16
• 1" dia. mounting shank.
• Activation with internal coolant system or air: minimum
15 PSI to Maximum 80 PSI.
• Replaceable hard and soft fingers available.
DESC.
CAP.
BODY DIA. OAL
PART NO.
PRICE
Mini Omni
3
⁄ " - 1 ⁄ "
16
1 8
2 ⁄
1 4
4"
69-994-2
$526.20
Omni
3
⁄ " - 3"
16
3 ⁄
3 4
6"
69-987-6
690.70
Individual Fingers for Mini Omni
DESCRIPTION
PART NO.
PRICE
Hardened Steel 50 RC
69-995-9
$27.75
Aluminum Fingers
69-997-5
23.70
Brass Fingers
69-998-3
23.70
4 Pc. Sets Fingers for Mini Omni
DESCRIPTION
PART NO.
PRICE
Hardened Steel 50 RC
69-999-1
$88.20
Soft Steel Fingers
70-000-5
77.25
Aluminum Fingers
70-001-3
71.75
Brass Fingers
70-002-1
71.75
Individual Fingers for Omni
DESCRIPTION
PART NO.
PRICE
Aluminum Steel Fingers
69-991-8
$23.70
Hardened Steel Fingers
69-992-6
27.75
Soft Steel
69-993-4
23.70
4 Pc. Sets Fingers for Omni
DESCRIPTION
PART NO.
PRICE
Aluminum Steel Fingers
69-988-4
$71.75
Hardened Steel Fingers
69-989-2
88.20
Soft Steel
69-990-0
77.25
Demagnetizer
• Effectively demagnetizes residual magnetism
in tools, molds and other workpieces.
• Convenient on-off switch.
• 9" long, 4 ⁄ " wide, 3 ⁄ " high. Weight 9 ⁄ lbs.
1 2
1 4
1 2
• Surface area 47 sq. in.
• 120 Volt single phase operation.
• D.O.T. Regulated. Shipped via ground freight only.
DESCRIPTION
PART NO.
PRICE
Demagnetizer
51-171-7
$99.95
51-171-7
R
Balancing Stands
For Balancing Shaft and
Non-Shaft Mounted Wheels
Level Balancing Stand -
For Balancing Shaft Mounted Wheels
• Uses a screw adjustable spirit level.
• Upper contacts are cylindrical hardened
and ground steel rods.
• Tolerance ±0.0003".
Adjustable Balancing Stand -
For Balancing Shaft and
Non-Shaft Mounted Wheels
• Will effectively balance wheels up to 20".
• Uses 4 intersecting rollers to move the wheel.
• Rollers can be adjusted from 4" to 12" apart.
• Tolerance ±0.0003".
DESCRIPTION
PART NO.
PRICE
8" Level Balancing Stand
57-922-7
$405.95
14" Level Balancing Stand
57-923-5
520.15
Adjustable Balancing Stand
57-924-3
1,004.45
57-924-3
57-922-7
Arbors
not included
Float N Lock Positioner
• It's an excellent dial indicator holder.
• All metal parts used.
• Precision angled bearings interface and lock the ball precisely
with a small turn of the locking knob. Excellent rigidity factor.
• Self-compensating, no need to disassemble to re-establish tension (as with other designs).
• Right angle notch (for 90° positioning) can be swung to any point 360° and then locked.
• D.O.T. Regulated. Shipped via ground freight only.
DESCRIPTION
PART NO.
PRICE
Mounting Bottom Holes ⁄ "-16
3 8
13-248-0
$37.99
Magnetic Base (90 lb. Pull) 3 ⁄ " x .435" High
1 4
13-249-8
50.11
13-248-0
13-249-8
Economy Demagnetizer
• 110 Volts, On-Off switch.
• Quickly demagnetizes tools, drills, punches,
dies, etc. by sliding the item across surface.
• 6.75" long, 4.5" wide, 5.0" high.
• Weight: 11 lbs.
DESCRIPTION
PART NO.
PRICE
Economy Demagnetizer
51-168-3
$88.15
51-168-3
Universal CNC Bar Puller
• Fits most CNC machines to fully utilize automatic
machining cycles with round, hex, square and flat bare stock.
• Two models with different capacities, Mini Omni ⁄ " - 1 ⁄ "
3
16
1 8
and Omni ⁄ " – 3"
3
16
• 1" dia. mounting shank.
• Activation with internal coolant system or air: minimum
15 PSI to Maximum 80 PSI.
• Replaceable hard and soft fingers available.
DESC.
CAP.
BODY DIA. OAL
PART NO.
PRICE
Mini Omni
3
⁄ " - 1 ⁄ "
16
1 8
2 ⁄
1 4
4"
69-994-2
$526.20
Omni
3
⁄ " - 3"
16
3 ⁄
3 4
6"
69-987-6
690.70
Individual Fingers for Mini Omni
DESCRIPTION
PART NO.
PRICE
Hardened Steel 50 RC
69-995-9
$27.75
Aluminum Fingers
69-997-5
23.70
Brass Fingers
69-998-3
23.70
4 Pc. Sets Fingers for Mini Omni
DESCRIPTION
PART NO.
PRICE
Hardened Steel 50 RC
69-999-1
$88.20
Soft Steel Fingers
70-000-5
77.25
Aluminum Fingers
70-001-3
71.75
Brass Fingers
70-002-1
71.75
Individual Fingers for Omni
DESCRIPTION
PART NO.
PRICE
Aluminum Steel Fingers
69-991-8
$23.70
Hardened Steel Fingers
69-992-6
27.75
Soft Steel
69-993-4
23.70
4 Pc. Sets Fingers for Omni
DESCRIPTION
PART NO.
PRICE
Aluminum Steel Fingers
69-988-4
$71.75
Hardened Steel Fingers
69-989-2
88.20
Soft Steel
69-990-0
77.25
Demagnetizer
• Effectively demagnetizes residual magnetism
in tools, molds and other workpieces.
• Convenient on-off switch.
• 9" long, 4 ⁄ " wide, 3 ⁄ " high. Weight 9 ⁄ lbs.
1 2
1 4
1 2
• Surface area 47 sq. in.
• 120 Volt single phase operation.
• D.O.T. Regulated. Shipped via ground freight only.
DESCRIPTION
PART NO.
PRICE
Demagnetizer
51-171-7
$99.95
51-171-7
R
Balancing Stands
For Balancing Shaft and
Non-Shaft Mounted Wheels
Level Balancing Stand -
For Balancing Shaft Mounted Wheels
• Uses a screw adjustable spirit level.
• Upper contacts are cylindrical hardened
and ground steel rods.
• Tolerance ±0.0003".
Adjustable Balancing Stand -
For Balancing Shaft and
Non-Shaft Mounted Wheels
• Will effectively balance wheels up to 20".
• Uses 4 intersecting rollers to move the wheel.
• Rollers can be adjusted from 4" to 12" apart.
• Tolerance ±0.0003".
DESCRIPTION
PART NO.
PRICE
8" Level Balancing Stand
57-922-7
$405.95
14" Level Balancing Stand
57-923-5
520.15
Adjustable Balancing Stand
57-924-3
1,004.45
57-924-3
57-922-7
Arbors
not included
Float N Lock Positioner
• It's an excellent dial indicator holder.
• All metal parts used.
• Precision angled bearings interface and lock the ball precisely
with a small turn of the locking knob. Excellent rigidity factor.
• Self-compensating, no need to disassemble to re-establish tension (as with other designs).
• Right angle notch (for 90° positioning) can be swung to any point 360° and then locked.
• D.O.T. Regulated. Shipped via ground freight only.
DESCRIPTION
PART NO.
PRICE
Mounting Bottom Holes ⁄ "-16
3 8
13-248-0
$37.99
Magnetic Base (90 lb. Pull) 3 ⁄ " x .435" High
1 4
13-249-8
50.11
13-248-0
13-249-8
