Page 314 Penn Tool Co. Precision Tooling Buyer's Guide 2019
P. 314
312
Threadlockers
and Retaining Compounds
• Eliminate expensive locking devices with increased
reliability and quality in many applications.
• State restrictions may apply.
10 ML. SIZE
50 ML. SIZE
250 ML. SIZE
TYPE
PART NO.
PRICE
PART NO.
PRICE
PART NO.
PRICE
Adhesive/sealant #271
62-806-5
$20.35
62-807-3
$56.35
62-808-1
$195.50
Removable #242
62-809-9
20.35
62-810-7
56.35
62-811-5
195.50
High Strength/Permanent #262
62-812-3
20.35
62-813-1
56.35
62-814-9
195.50
Penetrating #290
62-815-6
19.65
62-816-4
54.20
62-817-2
188.00
Retaining Compound #609
62-818-0
19.65
62-819-8
54.20
62-820-6
188.00
Small Screw #222
62-821-4
19.65
62-822-2
54.20
62-823-0
188.00
62-806-5
62-809-9
62-816-4
62-839-6
62-836-2 2
62-821-4
ODC Free Accelerators
• Tak Pak®accelerator 7452 ODC-Free is
acetone based. Use for most applications.
• Tak Pak® ODC-Free accelerator 712 is isopropyl alcohol based.
Use on most thermal plastic substrates.
NOTE: Acetone may adversely affect some thermal plastic substrates.
Tak Pak® 712 is recommended accelerator for these materials.
ODC Free, Tak Pak ® Adhesives
LOCTITE®
PART
SIZE
TYPE
MODEL #
NUMBER
PRICE
20 gram Kit
444
20419
62-836-2
$40.10
20 gram
444
12292
62-840-4
23.75
20 gram kit
382
20420
62-839-6
64.05
20 gram
382
38240
62-843-8
32.85
ODC Free Accelerator
LOCTITE®
PART
SIZE
TYPE
MODEL #
NUMBER
PRICE
1.75 fl.oz.
7452
18490
62-837-0
$11.40
1.75 fl.oz.
712
38240
62-838-8
14.00
.7 fl.oz.*
7452
18637
62-841-2
21.10
.7 fl.oz.*
712
18636
62-842-0
21.10
*Metered mist dispenser.
D.O.T. Regulated. Shipped via ground freight only.
No UPS Consignee or Collect shipments.
Tak Pak
®
Adhesive & Accelerator
• Both adhesive and accelerator contain no ozone depleting chemicals.
• For electronic and electrical work.
• Secure insulated wires, add tamper-proof settings, attach capacitors,
mount transformers, connect strain gage leads, etc., all within seconds.
• High viscosity makes the adhesive drop formation controllable,
preventing surface migration and penetration of through-holes on
printed circuit boards.
• Sets in seconds at room temperature - clamping is not necessary.
Tak Pak — Type 444
®
• For temperatures up to 180ºF with a viscosity of 700 CPS.
• Kit contains a 20 gram bottle of adhesive and a 1.75 oz. bottle
of 7452 ODC-Free accelerator.
Ultra Performance Tak Pak — Type 382
®
• A high temperature (250ºF), high viscosity (5000 CPS) adhesive
that withstands thermal cycling and “bake out” phase when
boards are subjected to 225ºF for several hours.
• Kit contains a 20 gram bottle of adhesive and a .7 oz. metered
mist 7452 ODC-Free accelerator.
62 836
High Strength Adhesive/Sealant #271
• Locks and seals - bearing retainer nuts, cylinder liner studs,
door closer plugs, automobile front suspension bolts, water
pump studs and nuts, hydraulic press studs (large dia.).
• Prevents movement of screw threads
and eliminates self loosening.
• Seals against leakage.
• Prevents rusting of threads - Cures without
cracking or shrinking.
Removable Threadlocker #242
• Removable with normal hand tools.
• Locks and seals nuts, bolts, screws, and fittings.
• Prevents vibration.
High Strength Threadlocker #262
• Prevents vibration and thread corrosion.
• Heavy duty use on bolts and studs.
Penetrating Threadlocker #290
• One drop applied to preassembled
fasteners will lock and seal to
eliminate vibration and corrosion.
• No need to disassemble parts.
Retaining Compound #609
• Use on gears, impellers, bearings,
bushings and cylindrical parts.
• Secures against spin-out.
Small Screw Threadlocker #222
• Locks and seals - set screws, adjustment
screws, and calibration screws.
• Prevents movement of screw threads
and eliminates self loosening.
• Cures without cracking or shrinking.
• For stainless steel and all other
metal fittings.
• High performance curing sealant
for tapered pipe threads.
• The high lubricating properties
of this compound prevent galling
on stainless steel, aluminum,
Monel, and all other pipe threads
and fittings.
• Provides rapidly curing low
pressure sealing.
• This product has excellent solvent
resistance and withstands
temperatures to 400ºF (204ºC).
• This product is not recommended
for use on plastic piping.
• 50 ml. tube.
• Loctite model #56747.
PST Pipe Sealant 567
®
DESCRIPTION
PART NO.
PRICE
Loctite PST. Pipe Sealant #567
®
62-825-5
$
28.30
567
62-825-5
• Recommended for sealing pipe threads & fittings
in the following application areas:
— Chemical processing.
— Petroleum refining.
— Gas compressor stations.
— Textile industry.
— Waste treatment facilities.
— Pulp-paper industry.
Threadlockers
and Retaining Compounds
• Eliminate expensive locking devices with increased
reliability and quality in many applications.
• State restrictions may apply.
10 ML. SIZE
50 ML. SIZE
250 ML. SIZE
TYPE
PART NO.
PRICE
PART NO.
PRICE
PART NO.
PRICE
Adhesive/sealant #271
62-806-5
$20.35
62-807-3
$56.35
62-808-1
$195.50
Removable #242
62-809-9
20.35
62-810-7
56.35
62-811-5
195.50
High Strength/Permanent #262
62-812-3
20.35
62-813-1
56.35
62-814-9
195.50
Penetrating #290
62-815-6
19.65
62-816-4
54.20
62-817-2
188.00
Retaining Compound #609
62-818-0
19.65
62-819-8
54.20
62-820-6
188.00
Small Screw #222
62-821-4
19.65
62-822-2
54.20
62-823-0
188.00
62-806-5
62-809-9
62-816-4
62-839-6
62-836-2 2
62-821-4
ODC Free Accelerators
• Tak Pak®accelerator 7452 ODC-Free is
acetone based. Use for most applications.
• Tak Pak® ODC-Free accelerator 712 is isopropyl alcohol based.
Use on most thermal plastic substrates.
NOTE: Acetone may adversely affect some thermal plastic substrates.
Tak Pak® 712 is recommended accelerator for these materials.
ODC Free, Tak Pak ® Adhesives
LOCTITE®
PART
SIZE
TYPE
MODEL #
NUMBER
PRICE
20 gram Kit
444
20419
62-836-2
$40.10
20 gram
444
12292
62-840-4
23.75
20 gram kit
382
20420
62-839-6
64.05
20 gram
382
38240
62-843-8
32.85
ODC Free Accelerator
LOCTITE®
PART
SIZE
TYPE
MODEL #
NUMBER
PRICE
1.75 fl.oz.
7452
18490
62-837-0
$11.40
1.75 fl.oz.
712
38240
62-838-8
14.00
.7 fl.oz.*
7452
18637
62-841-2
21.10
.7 fl.oz.*
712
18636
62-842-0
21.10
*Metered mist dispenser.
D.O.T. Regulated. Shipped via ground freight only.
No UPS Consignee or Collect shipments.
Tak Pak
®
Adhesive & Accelerator
• Both adhesive and accelerator contain no ozone depleting chemicals.
• For electronic and electrical work.
• Secure insulated wires, add tamper-proof settings, attach capacitors,
mount transformers, connect strain gage leads, etc., all within seconds.
• High viscosity makes the adhesive drop formation controllable,
preventing surface migration and penetration of through-holes on
printed circuit boards.
• Sets in seconds at room temperature - clamping is not necessary.
Tak Pak — Type 444
®
• For temperatures up to 180ºF with a viscosity of 700 CPS.
• Kit contains a 20 gram bottle of adhesive and a 1.75 oz. bottle
of 7452 ODC-Free accelerator.
Ultra Performance Tak Pak — Type 382
®
• A high temperature (250ºF), high viscosity (5000 CPS) adhesive
that withstands thermal cycling and “bake out” phase when
boards are subjected to 225ºF for several hours.
• Kit contains a 20 gram bottle of adhesive and a .7 oz. metered
mist 7452 ODC-Free accelerator.
62 836
High Strength Adhesive/Sealant #271
• Locks and seals - bearing retainer nuts, cylinder liner studs,
door closer plugs, automobile front suspension bolts, water
pump studs and nuts, hydraulic press studs (large dia.).
• Prevents movement of screw threads
and eliminates self loosening.
• Seals against leakage.
• Prevents rusting of threads - Cures without
cracking or shrinking.
Removable Threadlocker #242
• Removable with normal hand tools.
• Locks and seals nuts, bolts, screws, and fittings.
• Prevents vibration.
High Strength Threadlocker #262
• Prevents vibration and thread corrosion.
• Heavy duty use on bolts and studs.
Penetrating Threadlocker #290
• One drop applied to preassembled
fasteners will lock and seal to
eliminate vibration and corrosion.
• No need to disassemble parts.
Retaining Compound #609
• Use on gears, impellers, bearings,
bushings and cylindrical parts.
• Secures against spin-out.
Small Screw Threadlocker #222
• Locks and seals - set screws, adjustment
screws, and calibration screws.
• Prevents movement of screw threads
and eliminates self loosening.
• Cures without cracking or shrinking.
• For stainless steel and all other
metal fittings.
• High performance curing sealant
for tapered pipe threads.
• The high lubricating properties
of this compound prevent galling
on stainless steel, aluminum,
Monel, and all other pipe threads
and fittings.
• Provides rapidly curing low
pressure sealing.
• This product has excellent solvent
resistance and withstands
temperatures to 400ºF (204ºC).
• This product is not recommended
for use on plastic piping.
• 50 ml. tube.
• Loctite model #56747.
PST Pipe Sealant 567
®
DESCRIPTION
PART NO.
PRICE
Loctite PST. Pipe Sealant #567
®
62-825-5
$
28.30
567
62-825-5
• Recommended for sealing pipe threads & fittings
in the following application areas:
— Chemical processing.
— Petroleum refining.
— Gas compressor stations.
— Textile industry.
— Waste treatment facilities.
— Pulp-paper industry.
