Page 440 Penn Tool Co. Precision Tooling Buyer's Guide 2019
P. 440
438
Drill-Out
Broken-Bolt Extractors
• Broken bolts and studs quickly and easily removed
without damaging threads.
• High quality H.S.S., heat treated and precision ground.
• Suitable for removal of broken inch as well as metric
bolts and studs.
TO REMOVE BOLT OR STUD SIZE
PART NO.
PRICE
1
⁄ " and 6 mm
4
97-526-8
$22.80
5
⁄ " and 8 mm
16
97-527-6
25.45
3
⁄ " and 10 mm
8
97-528-4
26.90
1
⁄ " and 12 mm
2
97-529-2
26.90
Set of 4 Drill-Outs as above
97-525-0
82.65
The above Drill-Outs are special left handed drill bits
with unique extractor collet, conveniently used with
any reversible power drill.
TO REMOVE BOLT OR STUD SIZE
PART NO.
PRICE
#5, #6 and 3 mm
97-576-3
$19.55
#8 and 4 mm
97-577-1
20.50
#10 and 5 mm
97-578-9
20.50
1
⁄ " and 6 mm
4
97-579-7
20.50
Set of 4 Drill-Outs as above
97-575-5
69.20
Reversible combination with drill bit on one end and
extractor on opposite end.
7 Piece Set
DESCRIPTION
PART NO.
PRICE
Set of 7 – #5 to ⁄ " Range
1 2
97-580-5
$117.30
97-580-5
Carbide Broken
Tap Remover
• Tough sub-micron carbide easily cuts
through hardened HSS taps of any
style, straight flute, spiral flute
even thread forming roll taps.
• Unique point geometry gives strength
necessary to drill through taps.
• Quickly removes broken taps with simple four step process.
• Set includes all tools to remove broken tap.
• Drills through broken bolts, drills and hardened dowel pins.
• For use on Conventional or CNC milling machines.
DESCRIPTION
PART NO.
PRICE
Carbide Broken Tap Remover
97-320-6
$162.55
97-320-6
• Saves time-no more drilling out stripped
Head Cap Screws removed in seconds.
• Simply drive Sock-It-Out into Head Cap Screw
with hammer until firmly wedged-grab it at
bottom with wrench and turn Head Cap Screw out.
• Furnished in vinyl case.
REMOVES HEAD CAP SCREWS
PART NO.
PRICE
#6, #8, #10, ⁄ "
1 4
97-571-4
$39.15
1
⁄ ", ⁄ ", ⁄ ", ⁄ ", ⁄ "
4
5
16
3 8
7
16
1 2
97-572-2
51.20
5
⁄ " and ⁄ "
8
3 4
97-573-0
37.70
97-572-2
Nut Splitter
• Removes frozen and hard to remove rusted
nuts up to ⁄ " width ( ⁄ " across flats).
1
2
3
4
• Compact 4 ⁄ " long.
3
4
•
3
⁄ " drive hex head for use with wrenches or sockets.
4
• Pivoting chisel point and unique body angle can reach areas that other splitters cannot reach.
• Made of high grade heat treated forged body with plated finish to prevent rust.
DESCRIPTION
PART NO.
PRICE
Nut Splitter
96-074-0
$33.25
96-074-0
Shopboss™
Hardware Snips
Ideal for Cutting Aluminum Siding,
Roof Flashing, Screen, Binding Straps,
Light Sheet Metal, 18-Gauge Wire and more.
• Serrated blade edge grips while you cut for improved control.
• Titanium blade coating resists wear, scratches, chemicals and corrosion.
• Contoured, asymmetrical handles are designed for use with
work gloves and accommodate right and left handed users.
• Spring-action design reduces hand fatigue and provides cutting leverage.
• Wire cutter and stripper slices through wire without adding
wear to blades.
• Twine cutter cuts twine clearly and quickly.
• Pry-off bottle opener makes it easy to open bottles with work gloves.
• Easy-action lock keeps blades closed when not in use.
• Handle includes hanging loop for easy storage.
• Sheath includes a belt clip, deburring file, tape cutter and pencil holder.
• Length: 9"
DESCRIPTION
PART NO.
PRICE
Shopboss™ Hardware Snips
62-684-6
$30.40
Shopboss™
Hardware Snips
62-684-6
FatMax
®
Aviation Snips
• Drop forged chrome molybdenum steel with serrated jaw
blades gives a stable bite and helps reduce slippage.
• Auto-release latch opens with one squeeze.
• Identification plate shows the direction of the cut and mfr's #.
• Meets/exceeds ANSI specifications.
• Cuts 18 gauge cold rolled steel to 22 gauge stainless steel.
• Bi-material grip for comfort.
OAL
LOC
CUTS
GRIP COLOR
PART NO.
PRICE
10"
1 ⁄ " Straight 3
4
Yellow
92-274-0
$12.70
FatMax
®
Aviation Snips
92-274-0
Drill-Out
Broken-Bolt Extractors
• Broken bolts and studs quickly and easily removed
without damaging threads.
• High quality H.S.S., heat treated and precision ground.
• Suitable for removal of broken inch as well as metric
bolts and studs.
TO REMOVE BOLT OR STUD SIZE
PART NO.
PRICE
1
⁄ " and 6 mm
4
97-526-8
$22.80
5
⁄ " and 8 mm
16
97-527-6
25.45
3
⁄ " and 10 mm
8
97-528-4
26.90
1
⁄ " and 12 mm
2
97-529-2
26.90
Set of 4 Drill-Outs as above
97-525-0
82.65
The above Drill-Outs are special left handed drill bits
with unique extractor collet, conveniently used with
any reversible power drill.
TO REMOVE BOLT OR STUD SIZE
PART NO.
PRICE
#5, #6 and 3 mm
97-576-3
$19.55
#8 and 4 mm
97-577-1
20.50
#10 and 5 mm
97-578-9
20.50
1
⁄ " and 6 mm
4
97-579-7
20.50
Set of 4 Drill-Outs as above
97-575-5
69.20
Reversible combination with drill bit on one end and
extractor on opposite end.
7 Piece Set
DESCRIPTION
PART NO.
PRICE
Set of 7 – #5 to ⁄ " Range
1 2
97-580-5
$117.30
97-580-5
Carbide Broken
Tap Remover
• Tough sub-micron carbide easily cuts
through hardened HSS taps of any
style, straight flute, spiral flute
even thread forming roll taps.
• Unique point geometry gives strength
necessary to drill through taps.
• Quickly removes broken taps with simple four step process.
• Set includes all tools to remove broken tap.
• Drills through broken bolts, drills and hardened dowel pins.
• For use on Conventional or CNC milling machines.
DESCRIPTION
PART NO.
PRICE
Carbide Broken Tap Remover
97-320-6
$162.55
97-320-6
• Saves time-no more drilling out stripped
Head Cap Screws removed in seconds.
• Simply drive Sock-It-Out into Head Cap Screw
with hammer until firmly wedged-grab it at
bottom with wrench and turn Head Cap Screw out.
• Furnished in vinyl case.
REMOVES HEAD CAP SCREWS
PART NO.
PRICE
#6, #8, #10, ⁄ "
1 4
97-571-4
$39.15
1
⁄ ", ⁄ ", ⁄ ", ⁄ ", ⁄ "
4
5
16
3 8
7
16
1 2
97-572-2
51.20
5
⁄ " and ⁄ "
8
3 4
97-573-0
37.70
97-572-2
Nut Splitter
• Removes frozen and hard to remove rusted
nuts up to ⁄ " width ( ⁄ " across flats).
1
2
3
4
• Compact 4 ⁄ " long.
3
4
•
3
⁄ " drive hex head for use with wrenches or sockets.
4
• Pivoting chisel point and unique body angle can reach areas that other splitters cannot reach.
• Made of high grade heat treated forged body with plated finish to prevent rust.
DESCRIPTION
PART NO.
PRICE
Nut Splitter
96-074-0
$33.25
96-074-0
Shopboss™
Hardware Snips
Ideal for Cutting Aluminum Siding,
Roof Flashing, Screen, Binding Straps,
Light Sheet Metal, 18-Gauge Wire and more.
• Serrated blade edge grips while you cut for improved control.
• Titanium blade coating resists wear, scratches, chemicals and corrosion.
• Contoured, asymmetrical handles are designed for use with
work gloves and accommodate right and left handed users.
• Spring-action design reduces hand fatigue and provides cutting leverage.
• Wire cutter and stripper slices through wire without adding
wear to blades.
• Twine cutter cuts twine clearly and quickly.
• Pry-off bottle opener makes it easy to open bottles with work gloves.
• Easy-action lock keeps blades closed when not in use.
• Handle includes hanging loop for easy storage.
• Sheath includes a belt clip, deburring file, tape cutter and pencil holder.
• Length: 9"
DESCRIPTION
PART NO.
PRICE
Shopboss™ Hardware Snips
62-684-6
$30.40
Shopboss™
Hardware Snips
62-684-6
FatMax
®
Aviation Snips
• Drop forged chrome molybdenum steel with serrated jaw
blades gives a stable bite and helps reduce slippage.
• Auto-release latch opens with one squeeze.
• Identification plate shows the direction of the cut and mfr's #.
• Meets/exceeds ANSI specifications.
• Cuts 18 gauge cold rolled steel to 22 gauge stainless steel.
• Bi-material grip for comfort.
OAL
LOC
CUTS
GRIP COLOR
PART NO.
PRICE
10"
1 ⁄ " Straight 3
4
Yellow
92-274-0
$12.70
FatMax
®
Aviation Snips
92-274-0
