Page 82 Penn Tool Co. Precision Tooling Buyer's Guide 2019
P. 82
80
KAFER Dial Depth Gage
• Measuring range 0 - 1"
• Reading: 0.001"
• Accuracy: ±0.0005".
• Removable base: 3.15 x 0.59".
• Dial dia. 2 ⁄ ".
1 4
• Continuous dial for 1" travel.
• Large revolution counter. Jeweled bearings.
• Uniform pressure over full range of travel.
• 1", 2" and 3" extensions included.
• #4 - 48 thread.
DESCRIPTION
PART NO.
PRICE
Dial Depth Gage
20-750-6
$396.85
20-750-6
Made in
Germany
0 - 8" Dial Depth Gages
• The dial indicator has a precision-ground, hard-chrome-plated
stem with standard AGD ⁄ " diameter.
3 8
• Contact point is hardened, ground and chrome-plated steel.
• Spindle rack, pinions and pivots are hardened stainless steel
to insure long wear and continuing accuracy.
• Bezel is cleanly knurled and smoothly adjustable
with a clamping screw for positive settings.
• Accuracy: ±0.002"
• Flatness: 0.0002"
• Includes 1", 2" and 4" rods. Rods can be connected for depths up to 8".
• Thread size: #4-48".
• Spindle lifting lever for raising and lowering spindle
is maintained under spring pressure.
• Bottom surface of the base is hardened, ground
and lapped for highest degree of flatness.
• The dial indicator is attached to the base by a clamping screw and is
readily interchangeable with any other standard AGD dial indicator.
• Complete with fitted carrying case.
• Specifications
— 0 to 8" Measuring range.
— 1.0" Dial range.
— 0.001" Graduations.
— Measuring force: 2.0 N or less.
MITUTOYO
®
PART
BASE
MODEL #
NUMBER
PRICE
2.5"
7217S
10-927-2
$300.60
4"
7218S
10-928-0
324.45
10-927-2
MEASURING
BASE
MEASURING
BASE
MITUTOYO
PART
RANGE
RESOLUTION LENGTH
FORCE
ACCURACY
FLATNESS
MODEL #
NUMBER
PRICE
0 – 8"/
0.0005"/
0 – 200 mm
0.01 mm
2.5"
1.5 N
±0.001"
0.00020"
547-217S
11-469-4
$470.00
0 – 8"/
0.0005"/
0 – 200 mm
0.01 mm
4.0"
1.5 N
±0.001"
0.00020"
547-218S
11-470-2
471.20
0 – 8"/
0.00005"/
0 – 200 mm
0.001 mm
2.5"
1.5 N
±0.0003"
0.00008"
547-257S
11-471-0
572.15
0 – 8"/
0.00005"/
0 – 200 mm
0.001 mm
4.0"
1.5 N
±0.0003"
0.00008"
547-258S
11-472-8
580.05
Repl. Battery
07-310-6
2.25
11-469-4
Absolute Digimatic Depth Gages
Origin Set, Zero Setting, Data Hold, Data Output
• Uses Mitutoyo IDC Type Digimatic Indicators.
• Battery Life: 5,000 hours.
• Go/No Go judgment function and the
• Can keep track of the origin point, once set,
indication of the judgment function.
for the entire life of the battery.
• Inch/Metric conversion.
• Bottom of base is hardened ground and lapped for flatness.
• Data Output Port for SPC System.
• Face rotates 330° for use at different angles.
• Complete with one SR44 battery, 4 extension rods ( ⁄ ", 1", 2" and 4"), interchangeable stylus and Allen wrench.
1
2
Dial Depth Gage
Accessories
• #4-48 thread.
DESCRIPTION
LENGTH
PART NO.
PRICE
Extension Rod
1"
12-429-7
$14.00
Extension Rod
1 ⁄ "
1 2
12-430-5
15.05
Extension Rod
2"
12-431-3
16.30
Extension Rod
3"
12-432-1
17.70
Extension Rod
4"
12-433-9
23.30
Extension Rod
6"
12-434-7
27.40
Set of 6 Rods
1" - 6"
12-435-4
98.65
Extension Rod Contact Point
12-436-2
6.70
12-435-4
Individual Rods and
Rod Sets are supplied
WITHOUT contact points.
KAFER Dial Depth Gage
• Measuring range 0 - 1"
• Reading: 0.001"
• Accuracy: ±0.0005".
• Removable base: 3.15 x 0.59".
• Dial dia. 2 ⁄ ".
1 4
• Continuous dial for 1" travel.
• Large revolution counter. Jeweled bearings.
• Uniform pressure over full range of travel.
• 1", 2" and 3" extensions included.
• #4 - 48 thread.
DESCRIPTION
PART NO.
PRICE
Dial Depth Gage
20-750-6
$396.85
20-750-6
Made in
Germany
0 - 8" Dial Depth Gages
• The dial indicator has a precision-ground, hard-chrome-plated
stem with standard AGD ⁄ " diameter.
3 8
• Contact point is hardened, ground and chrome-plated steel.
• Spindle rack, pinions and pivots are hardened stainless steel
to insure long wear and continuing accuracy.
• Bezel is cleanly knurled and smoothly adjustable
with a clamping screw for positive settings.
• Accuracy: ±0.002"
• Flatness: 0.0002"
• Includes 1", 2" and 4" rods. Rods can be connected for depths up to 8".
• Thread size: #4-48".
• Spindle lifting lever for raising and lowering spindle
is maintained under spring pressure.
• Bottom surface of the base is hardened, ground
and lapped for highest degree of flatness.
• The dial indicator is attached to the base by a clamping screw and is
readily interchangeable with any other standard AGD dial indicator.
• Complete with fitted carrying case.
• Specifications
— 0 to 8" Measuring range.
— 1.0" Dial range.
— 0.001" Graduations.
— Measuring force: 2.0 N or less.
MITUTOYO
®
PART
BASE
MODEL #
NUMBER
PRICE
2.5"
7217S
10-927-2
$300.60
4"
7218S
10-928-0
324.45
10-927-2
MEASURING
BASE
MEASURING
BASE
MITUTOYO
PART
RANGE
RESOLUTION LENGTH
FORCE
ACCURACY
FLATNESS
MODEL #
NUMBER
PRICE
0 – 8"/
0.0005"/
0 – 200 mm
0.01 mm
2.5"
1.5 N
±0.001"
0.00020"
547-217S
11-469-4
$470.00
0 – 8"/
0.0005"/
0 – 200 mm
0.01 mm
4.0"
1.5 N
±0.001"
0.00020"
547-218S
11-470-2
471.20
0 – 8"/
0.00005"/
0 – 200 mm
0.001 mm
2.5"
1.5 N
±0.0003"
0.00008"
547-257S
11-471-0
572.15
0 – 8"/
0.00005"/
0 – 200 mm
0.001 mm
4.0"
1.5 N
±0.0003"
0.00008"
547-258S
11-472-8
580.05
Repl. Battery
07-310-6
2.25
11-469-4
Absolute Digimatic Depth Gages
Origin Set, Zero Setting, Data Hold, Data Output
• Uses Mitutoyo IDC Type Digimatic Indicators.
• Battery Life: 5,000 hours.
• Go/No Go judgment function and the
• Can keep track of the origin point, once set,
indication of the judgment function.
for the entire life of the battery.
• Inch/Metric conversion.
• Bottom of base is hardened ground and lapped for flatness.
• Data Output Port for SPC System.
• Face rotates 330° for use at different angles.
• Complete with one SR44 battery, 4 extension rods ( ⁄ ", 1", 2" and 4"), interchangeable stylus and Allen wrench.
1
2
Dial Depth Gage
Accessories
• #4-48 thread.
DESCRIPTION
LENGTH
PART NO.
PRICE
Extension Rod
1"
12-429-7
$14.00
Extension Rod
1 ⁄ "
1 2
12-430-5
15.05
Extension Rod
2"
12-431-3
16.30
Extension Rod
3"
12-432-1
17.70
Extension Rod
4"
12-433-9
23.30
Extension Rod
6"
12-434-7
27.40
Set of 6 Rods
1" - 6"
12-435-4
98.65
Extension Rod Contact Point
12-436-2
6.70
12-435-4
Individual Rods and
Rod Sets are supplied
WITHOUT contact points.
