Page 104 Penn Tool Co. Precision Tooling 2014 Sale Catalog
P. 104
MICROMETER SET MASTERS
•
Use as a toolcrib master,
calibration master, quality
control standard to check
lead and parallelism of
your micrometers.
•
Stainless steel to reduce
wear and prevent rust.
•
Hardened, stabilized,
ground and lapped to ±
.0001".
0-1"
MODEL No.
MSM-010
Also Available in Metric at the same price
as English
•
Metric available at the same price.
•
Long Form Certification to N.I.S.T.
No. MSK-100C for #MSK-100
add
$75.00 No.MSK-200C for #MSK-200
,
add
$150.00
Mikemaster
SURVEILLANCE KITS
For 1" Micrometers For 1", 2" & 3" Micrometers
•
Designed and packaged for the
shop using a majority of 1"
micrometers.
•
Has nine different sized steps, each
one accurate to ±.0001".
•
Steps will explore out-of parallel
anvils in 45º increments and
determine any other wear in the
micrometer.
•
Long form certificate to N.I.S.T.
Add:
$75.00 for #DMG-800,
$185.00 for #DMG-900.
®
1", 2", 3
MODEL
MSK-200
0-1"
MODEL
MSK-100
With Metal
Foam Case
With Metal
Foam Case
•
Convenient tool crib surveillance
for quick & easy inspection of depth
gages when they are checked out.
•
Model DMG-800 has six step depth
for checking the accuracy of dial
depth gages and depth micrometers
and proper seating of rods.
•
Range .500" to 5.500" in 1"
increments.
•
Model DMG-900 is for checking
depth gages longer than the
conventional 6" size, can be done
accurately and quickly.
•
Range .500" to 11.500" in 1"
increments. The .500" to 5.500" steps
accurate to ±.0002". Steps 6.500' to
11.500" are accurate to ±.0003".
Depthmaster
®
DEPTH MICROMETER CHECKER
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 104
$350.00
ISO
9001
CERTIFIED
Long Form Certificate of
Conformance to "NIST"
$275.00
$775.00
QUICK CHECK MASTERS FOR CMMs
2.0000
16.0000
22.6274
.000020
.000040
1 sec.
.0002
16" MODEL No.
MCH-016
8" MODEL No.
MCH-008
ISO
9001
CERTIFIED
All Quickcheck's
are made of 440c
stainless steel hardened to 62
Rockwell C scale, stress relieved
and triple stabilized, ground and
lapped flat and parallel.
Run Quickcheck
once a week to
assure your CMM is operating
properly between the yearly manu-
facturer calibrations.
Check diameter
, linear length and
squareness X to Y axis then X to Z
axis. Measure the 45º length for a
volumetric check.
Quickcheck
is your mechanical
assurance that your CMM is within
the specified tolerance of the
manufacturer.
$3995.00
$8995.00
Long Form Certification to N.I.S.T.
No. DMG-800C for #DMG-800 add $80.00
No. DMG-900C for #DMG-900 add $190.00
Model
Description
Price
DMG-800
Depthmaster .500"-5.500"
$ 875.00
DMG-900
Depthmaster .500"-11.500"
2300.00
VERNIER CALIPER MASTERS
SURVEILLANCE MASTER
MODEL No.
VCS-100
ISO
9001
CERTIFIED
Specifications:
1" to 6" range in 1" increments for outside & outside jaw calibration.
1" to 12" range in 1" (24 settings) for outside & inside jaw calibration.
Long Form Certificate of conformance to "NIST"
No. VCS-100C for #VCS-100 add $80.00
No.MSK-700C for #MSK-700 add $195.00
1" to 6"
1" to 12"
MODEL No.
MSK-700
$395.00
$1395.00
•
Lapped gaging faces are accurate
within ± .0002" or + .005mm from the
normal size.
•
Used for checking outside jaws,
inside jaws and parallelism of jaws.
•
Black-oxide to prevent rust.
DEPTH MICROMETER MASTERS
AND Z AXIS CHECK MASTERS
Depth Master
•
Depth Micrometer masters are used
to calibrate and set Depth
Micrometers.
•
The master is superior to gage block
calibration because they do not
require block stacks and therfore it is
much faster to inspect the linear
range of the tool.
•
The new model offers a more rigid
and stable tool than the tradiional
"step" master.
Z Axis Check Masters
•
Z axis check masters is used to calibrate
and set the z axis on optical measuring
machines.
•
The master is superior to gage block
calibration because they do not require
block stacks and therfore it is much
faster to inspect linear range of the
machine.
•
Engraved to the nearest .000010"
Long Form Certificate of Comformance to N.I.S.T.
No. DM-1EC for # DM-1E add $73.00
No. ADM-EC for # ADM-E add $180.00
Lapped Base
with Mirror Finish
Ground Base
for less reflection
#DM-1E ± .0001"
#ADM-E ± .0002"
No MSM-010C for #MSM-010
Add $73.00
No MSM-161C for #MSM-161
add $73.00
No. MSM-165C for #MSM-165
add $145.00
No. MSM-112C for #MSM-112
add $195.00
Model
MSM-010
MSM-161
MSM-165
MSM-112
Description
0-1" .100"-1.00" by
.100" increments
1"-6" by 1" increments
1/2"-6" by 1/2" increments
1"-12" by 1" increments
Price
$350.00
595.00
895.00
1895.00
Model
DM-1E
ADM-E
Range & Steps
.50"-5.50" x 1" Steps
6.50"-11.50" x 1" Steps
Price
$ 850.00
2495.00
Model
LX-001
LX-002
Finish
Lapped Base
Ground Base
Price
$675.00
595.00
Specifications:
C to Holes 2 legs
L
Hole diameter
Hypotenuse to C
Diameter roundness within .000010
Length measurement
uncertainty
Angle, less than:
Flat & parallel within
C
L
C
L
L
1.0000
8.0000
11.3137
.000020
1 sec.
.000050
8"
16"
•
Use as a toolcrib master,
calibration master, quality
control standard to check
lead and parallelism of
your micrometers.
•
Stainless steel to reduce
wear and prevent rust.
•
Hardened, stabilized,
ground and lapped to ±
.0001".
0-1"
MODEL No.
MSM-010
Also Available in Metric at the same price
as English
•
Metric available at the same price.
•
Long Form Certification to N.I.S.T.
No. MSK-100C for #MSK-100
add
$75.00 No.MSK-200C for #MSK-200
,
add
$150.00
Mikemaster
SURVEILLANCE KITS
For 1" Micrometers For 1", 2" & 3" Micrometers
•
Designed and packaged for the
shop using a majority of 1"
micrometers.
•
Has nine different sized steps, each
one accurate to ±.0001".
•
Steps will explore out-of parallel
anvils in 45º increments and
determine any other wear in the
micrometer.
•
Long form certificate to N.I.S.T.
Add:
$75.00 for #DMG-800,
$185.00 for #DMG-900.
®
1", 2", 3
MODEL
MSK-200
0-1"
MODEL
MSK-100
With Metal
Foam Case
With Metal
Foam Case
•
Convenient tool crib surveillance
for quick & easy inspection of depth
gages when they are checked out.
•
Model DMG-800 has six step depth
for checking the accuracy of dial
depth gages and depth micrometers
and proper seating of rods.
•
Range .500" to 5.500" in 1"
increments.
•
Model DMG-900 is for checking
depth gages longer than the
conventional 6" size, can be done
accurately and quickly.
•
Range .500" to 11.500" in 1"
increments. The .500" to 5.500" steps
accurate to ±.0002". Steps 6.500' to
11.500" are accurate to ±.0003".
Depthmaster
®
DEPTH MICROMETER CHECKER
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 104
$350.00
ISO
9001
CERTIFIED
Long Form Certificate of
Conformance to "NIST"
$275.00
$775.00
QUICK CHECK MASTERS FOR CMMs
2.0000
16.0000
22.6274
.000020
.000040
1 sec.
.0002
16" MODEL No.
MCH-016
8" MODEL No.
MCH-008
ISO
9001
CERTIFIED
All Quickcheck's
are made of 440c
stainless steel hardened to 62
Rockwell C scale, stress relieved
and triple stabilized, ground and
lapped flat and parallel.
Run Quickcheck
once a week to
assure your CMM is operating
properly between the yearly manu-
facturer calibrations.
Check diameter
, linear length and
squareness X to Y axis then X to Z
axis. Measure the 45º length for a
volumetric check.
Quickcheck
is your mechanical
assurance that your CMM is within
the specified tolerance of the
manufacturer.
$3995.00
$8995.00
Long Form Certification to N.I.S.T.
No. DMG-800C for #DMG-800 add $80.00
No. DMG-900C for #DMG-900 add $190.00
Model
Description
Price
DMG-800
Depthmaster .500"-5.500"
$ 875.00
DMG-900
Depthmaster .500"-11.500"
2300.00
VERNIER CALIPER MASTERS
SURVEILLANCE MASTER
MODEL No.
VCS-100
ISO
9001
CERTIFIED
Specifications:
1" to 6" range in 1" increments for outside & outside jaw calibration.
1" to 12" range in 1" (24 settings) for outside & inside jaw calibration.
Long Form Certificate of conformance to "NIST"
No. VCS-100C for #VCS-100 add $80.00
No.MSK-700C for #MSK-700 add $195.00
1" to 6"
1" to 12"
MODEL No.
MSK-700
$395.00
$1395.00
•
Lapped gaging faces are accurate
within ± .0002" or + .005mm from the
normal size.
•
Used for checking outside jaws,
inside jaws and parallelism of jaws.
•
Black-oxide to prevent rust.
DEPTH MICROMETER MASTERS
AND Z AXIS CHECK MASTERS
Depth Master
•
Depth Micrometer masters are used
to calibrate and set Depth
Micrometers.
•
The master is superior to gage block
calibration because they do not
require block stacks and therfore it is
much faster to inspect the linear
range of the tool.
•
The new model offers a more rigid
and stable tool than the tradiional
"step" master.
Z Axis Check Masters
•
Z axis check masters is used to calibrate
and set the z axis on optical measuring
machines.
•
The master is superior to gage block
calibration because they do not require
block stacks and therfore it is much
faster to inspect linear range of the
machine.
•
Engraved to the nearest .000010"
Long Form Certificate of Comformance to N.I.S.T.
No. DM-1EC for # DM-1E add $73.00
No. ADM-EC for # ADM-E add $180.00
Lapped Base
with Mirror Finish
Ground Base
for less reflection
#DM-1E ± .0001"
#ADM-E ± .0002"
No MSM-010C for #MSM-010
Add $73.00
No MSM-161C for #MSM-161
add $73.00
No. MSM-165C for #MSM-165
add $145.00
No. MSM-112C for #MSM-112
add $195.00
Model
MSM-010
MSM-161
MSM-165
MSM-112
Description
0-1" .100"-1.00" by
.100" increments
1"-6" by 1" increments
1/2"-6" by 1/2" increments
1"-12" by 1" increments
Price
$350.00
595.00
895.00
1895.00
Model
DM-1E
ADM-E
Range & Steps
.50"-5.50" x 1" Steps
6.50"-11.50" x 1" Steps
Price
$ 850.00
2495.00
Model
LX-001
LX-002
Finish
Lapped Base
Ground Base
Price
$675.00
595.00
Specifications:
C to Holes 2 legs
L
Hole diameter
Hypotenuse to C
Diameter roundness within .000010
Length measurement
uncertainty
Angle, less than:
Flat & parallel within
C
L
C
L
L
1.0000
8.0000
11.3137
.000020
1 sec.
.000050
8"
16"
