Page 118 Penn Tool Co. Precision Tooling 2014 Sale Catalog
P. 118
ELECTRIC METAL
MARKING SYSTEM
STARTER KIT
10 Volt - 2 Amps
Kit No. EOM-100
Contains:
Etch-O-Matic marker with standard head
marking size 7/8"x 1-3/4", electrical cord, ground
plate, 2 oz. Electrolyte solution in plastic bottle, 10
special stencils, neutralizer, deep etching adapter
clip and complete instructions.
It can make fast A.C. marks
, then change instantly
to deep etch marking down to .003" deep. It can
make large marks 2"x 4" or larger for trademarks or
etch hard-to-mark coating like black oxide quickly.
Contains:
1 - 15-volt, 10-amp. marker unit with
external transformer; adapter clip for deep etch
marking; ground plate; 8-oz. general purpose elec-
trolyte; 8-oz. neutralizer; extra pads; 100 pack
special stencils; complete instructions and packed
in study plastic carrying case.
Etch-O-Matic
*Additional Supplies and
Refills Available
SUPER KIT
15 Volt - 10 Amps
Heavy Duty
Kit No. EOM-200
•
Etch-O-Matic can be as deep
as .003" of an inch in less
than 30 seconds or mark the
hardest tool steel and carbides
almost instantly.
•
It marks any flat or round
metal surface down to 1/16"
diameter and any metal
thickness from thin foil up the
largest castings easily.
$89.95
$199.95
LED FLASHLIGHTS TREME
Precise
•
New technology designed LED lights
provides an extra long battery life up
to 600 hours continuous use.
•
Last 50 times longer than regular
flashlights.
•
Provides brighter and stronger natural
light.
•
Switch rated for 10,000 on/off.
•
All climate and corrosion resistance
METAL barrel.
•
Use regular cell battery (not included)
TREME
Fishman's
Mini
V-TAP GUIDES
•
Automatically squares up the tap with
the surface.
•
A V-groove along the bottom of the
V-TapGuide allows for perpendicular
alignment with all tap sizes on round
parts or corners.
•
Portable, pocket size.
•
Natural steel finish non-plated.
•
Made from special nickel alloyed
steel that is heat treated.
•
The bottom surface is ground to assure
stability & accurate perpendicular
alignment on flat surfaces.
•
Supplied with a handy plastic storage
case.
•
Guide holes are sized for ANSI
standard ground taps.
CAM•LOCK TAP & TOOL WRENCH
•
The heart of the tool is the Cam-
Lock double-sided collet, one end
holds 1/8-1/4 tools the other holds
1/4-1/2 tools.
•
Choose the correct collet size and
insert it into the Cam-Lock wrench
body.
•
With the collet in place, screw
the knurled collet head onto the
wrench body.
•
With the Cam-Lock handle parallel to the
wrench body (as shown) insert your Tap
or Drill and finger tighten only.
•
Turn the Cam-Lock wrench from parallel
to a perpendicular position, cam action
locks cam, collet & tool all firmly in place.
•
To change tools, just turn the handle to the
parallel position & insert new tool.
Fast-no wrench-won't loosen-hassle free.
MODEL No.
CLT-005
$29.95
The Patented 3-Piece Design
gives this one tool a range from
1/8" to 1/2" which normally requires 2 standard tap wrenches
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 118
Model
VTG-001
VTG-002
Description
NC & NF Sizes from 0-80 thru 5/8"
(Except #12 & 9/16")
Metric Sizes: 1.6mm, 2mm, 2.5mm,
3mm, 3.5mm, 4mm, 5mm, 6mm,
8mm, 10mm, 12mm, 14mm & 16mm
List
$29.95
29.95
Sale
$24.95
24.95
ELECTRO - SPARK ENGRAVER
•
Writes with ease on all metals, aluminum, brass, steel, hardened steel,
carbide etc. Safe continuous use, no danger of shock.
•
•
The spark produced between the electrode engraving point and the workpiece
leaves a clean oxide marking in the engraved areas.
•
Permanent marking - can be removed by grinding only.
•
The electric pen is connected to a single phase transformer, specifically
constructed for the purpose. Made in Switzerland.
•
•
Optional settings provide smooth writing from fine to very heavy.
•
Ideal for clean marking on metal parts, dies, cutting tools, measuring tools.
•
Furnished complete with a 3 ea. 3/64" x 1" electrodes.
3 Setting Type (Shown)
Model
97-474-1
97-475-8
97-476-6
97-477-4
97-478-2
Description
25 Watt, 3 Setting Kit
50 Watt, 6 Setting Kit
3/64" x 1" Electrode
1/32" x 1" Electrode
1/16" x 1" Electrode
Price
$409.05
502.95
9.90
10.10
11.45
Model
8401-0440
52-630-455
Description
Mini Flexlight with 1" Magnetic Base $37.50
Mini Flexlight with 2" Magnetic Base
List
39.50
Sale
$25.95
26.50
•
14 LED Ultra-bright flashlight.
•
Powerful, low-profile magnetic base.
•
Slim, articulating flex bar allows easy
and accurate positioning.
UNIVERSAL MAGNETIC BASE
MINI LED FLASHLIGHT
•
Quick release mounting bracket
clamp.
•
Batteries included.
TREME
Model
No.
806-003
806-004
806-001
Type
Style
Mini
Fishman's
No. of
LED Bulbs
5
15
6
Overall
Length
3.3"
4"
8.5"
Battery
Type
1-AAA
3-AAA
3-AA
Price
Each
$ 6.50
18.50
21.95
MARKING SYSTEM
STARTER KIT
10 Volt - 2 Amps
Kit No. EOM-100
Contains:
Etch-O-Matic marker with standard head
marking size 7/8"x 1-3/4", electrical cord, ground
plate, 2 oz. Electrolyte solution in plastic bottle, 10
special stencils, neutralizer, deep etching adapter
clip and complete instructions.
It can make fast A.C. marks
, then change instantly
to deep etch marking down to .003" deep. It can
make large marks 2"x 4" or larger for trademarks or
etch hard-to-mark coating like black oxide quickly.
Contains:
1 - 15-volt, 10-amp. marker unit with
external transformer; adapter clip for deep etch
marking; ground plate; 8-oz. general purpose elec-
trolyte; 8-oz. neutralizer; extra pads; 100 pack
special stencils; complete instructions and packed
in study plastic carrying case.
Etch-O-Matic
*Additional Supplies and
Refills Available
SUPER KIT
15 Volt - 10 Amps
Heavy Duty
Kit No. EOM-200
•
Etch-O-Matic can be as deep
as .003" of an inch in less
than 30 seconds or mark the
hardest tool steel and carbides
almost instantly.
•
It marks any flat or round
metal surface down to 1/16"
diameter and any metal
thickness from thin foil up the
largest castings easily.
$89.95
$199.95
LED FLASHLIGHTS TREME
Precise
•
New technology designed LED lights
provides an extra long battery life up
to 600 hours continuous use.
•
Last 50 times longer than regular
flashlights.
•
Provides brighter and stronger natural
light.
•
Switch rated for 10,000 on/off.
•
All climate and corrosion resistance
METAL barrel.
•
Use regular cell battery (not included)
TREME
Fishman's
Mini
V-TAP GUIDES
•
Automatically squares up the tap with
the surface.
•
A V-groove along the bottom of the
V-TapGuide allows for perpendicular
alignment with all tap sizes on round
parts or corners.
•
Portable, pocket size.
•
Natural steel finish non-plated.
•
Made from special nickel alloyed
steel that is heat treated.
•
The bottom surface is ground to assure
stability & accurate perpendicular
alignment on flat surfaces.
•
Supplied with a handy plastic storage
case.
•
Guide holes are sized for ANSI
standard ground taps.
CAM•LOCK TAP & TOOL WRENCH
•
The heart of the tool is the Cam-
Lock double-sided collet, one end
holds 1/8-1/4 tools the other holds
1/4-1/2 tools.
•
Choose the correct collet size and
insert it into the Cam-Lock wrench
body.
•
With the collet in place, screw
the knurled collet head onto the
wrench body.
•
With the Cam-Lock handle parallel to the
wrench body (as shown) insert your Tap
or Drill and finger tighten only.
•
Turn the Cam-Lock wrench from parallel
to a perpendicular position, cam action
locks cam, collet & tool all firmly in place.
•
To change tools, just turn the handle to the
parallel position & insert new tool.
Fast-no wrench-won't loosen-hassle free.
MODEL No.
CLT-005
$29.95
The Patented 3-Piece Design
gives this one tool a range from
1/8" to 1/2" which normally requires 2 standard tap wrenches
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 118
Model
VTG-001
VTG-002
Description
NC & NF Sizes from 0-80 thru 5/8"
(Except #12 & 9/16")
Metric Sizes: 1.6mm, 2mm, 2.5mm,
3mm, 3.5mm, 4mm, 5mm, 6mm,
8mm, 10mm, 12mm, 14mm & 16mm
List
$29.95
29.95
Sale
$24.95
24.95
ELECTRO - SPARK ENGRAVER
•
Writes with ease on all metals, aluminum, brass, steel, hardened steel,
carbide etc. Safe continuous use, no danger of shock.
•
•
The spark produced between the electrode engraving point and the workpiece
leaves a clean oxide marking in the engraved areas.
•
Permanent marking - can be removed by grinding only.
•
The electric pen is connected to a single phase transformer, specifically
constructed for the purpose. Made in Switzerland.
•
•
Optional settings provide smooth writing from fine to very heavy.
•
Ideal for clean marking on metal parts, dies, cutting tools, measuring tools.
•
Furnished complete with a 3 ea. 3/64" x 1" electrodes.
3 Setting Type (Shown)
Model
97-474-1
97-475-8
97-476-6
97-477-4
97-478-2
Description
25 Watt, 3 Setting Kit
50 Watt, 6 Setting Kit
3/64" x 1" Electrode
1/32" x 1" Electrode
1/16" x 1" Electrode
Price
$409.05
502.95
9.90
10.10
11.45
Model
8401-0440
52-630-455
Description
Mini Flexlight with 1" Magnetic Base $37.50
Mini Flexlight with 2" Magnetic Base
List
39.50
Sale
$25.95
26.50
•
14 LED Ultra-bright flashlight.
•
Powerful, low-profile magnetic base.
•
Slim, articulating flex bar allows easy
and accurate positioning.
UNIVERSAL MAGNETIC BASE
MINI LED FLASHLIGHT
•
Quick release mounting bracket
clamp.
•
Batteries included.
TREME
Model
No.
806-003
806-004
806-001
Type
Style
Mini
Fishman's
No. of
LED Bulbs
5
15
6
Overall
Length
3.3"
4"
8.5"
Battery
Type
1-AAA
3-AAA
3-AA
Price
Each
$ 6.50
18.50
21.95
