Page 121 Penn Tool Co. Precision Tooling 2014 Sale Catalog
P. 121
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Precise
TRU-CENTER EXPANDING TRANSFER PUNCH SET
•
Compact set of 3 takes the place of numerous
individual solid punches.
•
Each punch expands within its range to
pick up to true center of holes from 1/4” to
11/16” diameter.
•
By turning the knurled head, the punch
body expands to the perfect fit in the
bottom of the hole.
•
A light hammer stroke on the top of the
center pin provides the desired “Tru-
Center” mark.
SET No.
TCE-750
Made In Japan
PRECISION PUNCH SETS
Extra Long Punches
8" Length 5 Piece Set
1/8", 3/16", 1/4", 5/16", 3/8"
•
Made of tool steel, hardened and
centerless ground.
•
Knurled body is 4-1/2" long and the
drive pin section 3-1/2" long.
•
For use on work not accessible with
shorter punches.
Drive Pin Punches
4" Length 8 Piece Set
1/16" thru 5/16" by 16ths
•
Tool steel punches are uniformly heat
treated and centerless ground to
withstand the hardest use.
•
4" long with knurled bodies.
•
Ends are ground square for accurate
pin driving.
•
Federal Specs - GGG-P-831E
Precise
4" AND 8" LONG DRIVE PIN PUNCH
SET No. DPP-4
4" Long 8 Piece Set
1/16", 3/32", 1/8"
5/32", 3/16", 7/32"
1/4" & 5/16"
•
Made of tool steel.
•
Punch section centerless ground.
•
Handles black oxide for rust
prevention.
•
Knurled body for better grip.
•
Hardened both ends, Rc 45 to 52.
•
8" length, drive pin section 3-1/2"
long.
•
Set supplied in fitted pouch with
clear size markings.
SET No. DPP-8
8" Long
5 Piece Set
1/8", 3/16", 1/4"
5/16", 3/8"
5/16" & 3/8"
Precise
TRANSFER PUNCH SETS
Precision/Matched
•
For toolmakers, machinists and
tool cribs.
•
Made of the finest tool steel Blade
oxide finish.
•
Carefully heat treated - tempered.
•
Diameters .0025” undersize to
facilitate use.
28 Piece Set
3/32” - 17/32”
SET No.
STP-16
Metal
Rack
Imported
$8.95
$9.95
$129.95
$10.95
Precise
BENCH BLOCK & DRIVE PIN PUNCH
•
Very handy pin punch set in a plastic
pouch.
•
Consists of eight popular sizes in 4"
long (1/16" to 5/16") and five popular
sizes in 8" long (1/8" to 3/8") drive pin
punches.
•
V-groove across the face
accommodates round and odd
shaped stock.
•
Hardened and ground knurled
body for a firm grip.
•
Block diameter 3" x 1-1/2" H.
Holes are 1/8" to 5/8"
Buy Both
SET No. BBD-184
Reg. $33.90
BENCH BLOCK
PIN PUNCH SET
Bench Block No. BB-101
$16.95
13-Piece Pin Punch Set No. DPP-84
$17.95
$29.95
Place the acrylic lens in the holder to easliy
and accurately site in the area on the
workpiece to be punched.
Replace the lens with the center punch and
quickly and accurately mark the workpiece.
•
Efficient and precision
punching of hole centers
•
Magnified center dot and circle
for accurate punching
•
Used for marking, punching,
stoking and riveting
•
9x acrylic lens
ON-MARK OPTICAL CENTER PUNCH
AND
Precise
5 PIECE CENTER PUNCH
SETS - ROUND SHANK
•
Points are ground to size for maximum
strength and penetration.
•
Knurled body.
•
Stamped with size for quick
identification.
•
Set contains on each of the five sizes,
AA-D, packed in a vinyl case.
•
Conforms
to
government
specifications GGG-P-831E.
SET No.
SPC-74
Reg. $20.80
$16.50
Precise
Imported
SET No.
CP-05
$7.95
Individual Sizes
Available Upon Request
METAL ETCHING PEN
•
Indispensable anyplace where metals,
hardened as well as thin walled, have
to be marked or identified.
•
Strong effect on heavy metals, stainless
steel, iron, copper, brass, nickel, tin,
lead.
•
Leaves distinctive, smudge proof, black
markings.
•
No electrical flux is necessary. A
special acid solution flows like ink
in a felt-tip pen and a permanent
etch is produced on the metal.
•
Ideal for toolroom use and marking
in the machine shop.
•
Apply on clean surface. After
application wipe dry with oily cloth.
97-470-9
Reg. $23.90
$17.90
Page 121
Model
STP-16
TPS-100
TPS-160
TPS-026
TPS-113
TPS-114
Description
28 punches - 4-7/8" long, 3/32" to 1/2" by 1/64", plus 17/32"
33 punches - 1/2" to 1" by 1/64th" 4-7/8" long
60 punches - 4-7/8" long, wire gage sizes #1 thru #60
26 punches - 4-7/8" long, letters A to Z
25 punches - 1.0mm thru 13.0 by .5mm
All of the above 5 Sets
Price
$10.95
45.00
10.95
12.95
18.95
$84.95
Model No.
52-500-075
Reg. Price
$84.50
Sale Price
$79.95
Model
SPC-75
SPC-76
Description
4" Set Plastic Case
8"Long Set Plastic Case
Price
$29.95
27.95
No. SPC-76
No. SPC-75
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Precise
TRU-CENTER EXPANDING TRANSFER PUNCH SET
•
Compact set of 3 takes the place of numerous
individual solid punches.
•
Each punch expands within its range to
pick up to true center of holes from 1/4” to
11/16” diameter.
•
By turning the knurled head, the punch
body expands to the perfect fit in the
bottom of the hole.
•
A light hammer stroke on the top of the
center pin provides the desired “Tru-
Center” mark.
SET No.
TCE-750
Made In Japan
PRECISION PUNCH SETS
Extra Long Punches
8" Length 5 Piece Set
1/8", 3/16", 1/4", 5/16", 3/8"
•
Made of tool steel, hardened and
centerless ground.
•
Knurled body is 4-1/2" long and the
drive pin section 3-1/2" long.
•
For use on work not accessible with
shorter punches.
Drive Pin Punches
4" Length 8 Piece Set
1/16" thru 5/16" by 16ths
•
Tool steel punches are uniformly heat
treated and centerless ground to
withstand the hardest use.
•
4" long with knurled bodies.
•
Ends are ground square for accurate
pin driving.
•
Federal Specs - GGG-P-831E
Precise
4" AND 8" LONG DRIVE PIN PUNCH
SET No. DPP-4
4" Long 8 Piece Set
1/16", 3/32", 1/8"
5/32", 3/16", 7/32"
1/4" & 5/16"
•
Made of tool steel.
•
Punch section centerless ground.
•
Handles black oxide for rust
prevention.
•
Knurled body for better grip.
•
Hardened both ends, Rc 45 to 52.
•
8" length, drive pin section 3-1/2"
long.
•
Set supplied in fitted pouch with
clear size markings.
SET No. DPP-8
8" Long
5 Piece Set
1/8", 3/16", 1/4"
5/16", 3/8"
5/16" & 3/8"
Precise
TRANSFER PUNCH SETS
Precision/Matched
•
For toolmakers, machinists and
tool cribs.
•
Made of the finest tool steel Blade
oxide finish.
•
Carefully heat treated - tempered.
•
Diameters .0025” undersize to
facilitate use.
28 Piece Set
3/32” - 17/32”
SET No.
STP-16
Metal
Rack
Imported
$8.95
$9.95
$129.95
$10.95
Precise
BENCH BLOCK & DRIVE PIN PUNCH
•
Very handy pin punch set in a plastic
pouch.
•
Consists of eight popular sizes in 4"
long (1/16" to 5/16") and five popular
sizes in 8" long (1/8" to 3/8") drive pin
punches.
•
V-groove across the face
accommodates round and odd
shaped stock.
•
Hardened and ground knurled
body for a firm grip.
•
Block diameter 3" x 1-1/2" H.
Holes are 1/8" to 5/8"
Buy Both
SET No. BBD-184
Reg. $33.90
BENCH BLOCK
PIN PUNCH SET
Bench Block No. BB-101
$16.95
13-Piece Pin Punch Set No. DPP-84
$17.95
$29.95
Place the acrylic lens in the holder to easliy
and accurately site in the area on the
workpiece to be punched.
Replace the lens with the center punch and
quickly and accurately mark the workpiece.
•
Efficient and precision
punching of hole centers
•
Magnified center dot and circle
for accurate punching
•
Used for marking, punching,
stoking and riveting
•
9x acrylic lens
ON-MARK OPTICAL CENTER PUNCH
AND
Precise
5 PIECE CENTER PUNCH
SETS - ROUND SHANK
•
Points are ground to size for maximum
strength and penetration.
•
Knurled body.
•
Stamped with size for quick
identification.
•
Set contains on each of the five sizes,
AA-D, packed in a vinyl case.
•
Conforms
to
government
specifications GGG-P-831E.
SET No.
SPC-74
Reg. $20.80
$16.50
Precise
Imported
SET No.
CP-05
$7.95
Individual Sizes
Available Upon Request
METAL ETCHING PEN
•
Indispensable anyplace where metals,
hardened as well as thin walled, have
to be marked or identified.
•
Strong effect on heavy metals, stainless
steel, iron, copper, brass, nickel, tin,
lead.
•
Leaves distinctive, smudge proof, black
markings.
•
No electrical flux is necessary. A
special acid solution flows like ink
in a felt-tip pen and a permanent
etch is produced on the metal.
•
Ideal for toolroom use and marking
in the machine shop.
•
Apply on clean surface. After
application wipe dry with oily cloth.
97-470-9
Reg. $23.90
$17.90
Page 121
Model
STP-16
TPS-100
TPS-160
TPS-026
TPS-113
TPS-114
Description
28 punches - 4-7/8" long, 3/32" to 1/2" by 1/64", plus 17/32"
33 punches - 1/2" to 1" by 1/64th" 4-7/8" long
60 punches - 4-7/8" long, wire gage sizes #1 thru #60
26 punches - 4-7/8" long, letters A to Z
25 punches - 1.0mm thru 13.0 by .5mm
All of the above 5 Sets
Price
$10.95
45.00
10.95
12.95
18.95
$84.95
Model No.
52-500-075
Reg. Price
$84.50
Sale Price
$79.95
Model
SPC-75
SPC-76
Description
4" Set Plastic Case
8"Long Set Plastic Case
Price
$29.95
27.95
No. SPC-76
No. SPC-75
