Page 170 Penn Tool Co. Precision Tooling 2014 Sale Catalog
P. 170
•
The CNC Lathe Gage by Edge Technology is used to set lathe tools on the spindle
axis for optimum cutting conditions.
•
To use this gage first adjust it to match the angle of your slant bed lathe and install
the 1/4" shaft in a collet or chuck.
•
Then set one of the contact faces of the gage on the cutting edge of the tool.
•
Next adjust the tool until the bubble is centered in the level.
•
This procedure ensures the cutter is accurately placed on a plane that intersects
the rotational axis of the spindle. (Note: it is necessary for the lathe to be leveled
for the CNC Lathe gage to work properly)
•
Set turning, boring, and facing tools
on spindle axis for optimum cutting
conditions
•
Precision glass vial level with 30'/
2mm sensitivity
•
Cutter contact faces designed to work
with tools that have cutting edges facing
up as well as facing down
•
Angular adjustability of +/- 60° to match
any lathe slant bed angle
•
Hands free design
•
Ground steel shaft supported by dual
ball bearings.
•
Durable anodized finish with easy-to-
read engraved marks
•
Made from high strength aluminum
CNC LATHE GAGE
MODEL No.
13-000
$44.95
TAP AND REAMER LEVELS
•
The Tap Handle Level by Edge Technology is specifically designed to eliminate
tap breakage.
•
The most common cause of tap breakage is starting the tap into the hole at an
angle. The large bulls-eye-level in this unit allows the angle of the tap to be
monitored as it is started into the hole.
•
The unit is easily installed on any flat top tap handle and the magnetic recess of
the unit will secure it in place.
Set of 2 levels
1) Small .550" Diameter
1) Large .875" Diameter
MODEL No.
15-000
$22.95
Less Tap
Wrenches
•
Magnetic recess ensures
unit stays in position
•
Made from high strength
aluminum
•
Durable red anodize finish
Specifications:
No other book covers CNC control setup in such practical detail. This unique
reference from the author of the best-selling CNC Programming Handbook features
nearly all of the activities a typical CNC operator performs on a daily basis. Starting
with overall descriptions and in-depth explanations of various features, it goes much
further and is sure to be a valuable resource for anyone involved in CNC
•
Describes working with all types of offsets for
milling and turning applications, interpretation of
part programs, applying trial cuts, making program
changes, and much more.
•
Places emphasis on troubleshooting many
common problems that occur in CNC operations.
•
Presents suggested methods of correction, along
with methods of prevention.
INDUSTRIAL PRESS CNC CONTROL
SETUP FOR MILLING AND TURNING
No. 3350-3
Reg. $59.95
$44.95
For Additional details
Visit our website:
www.penntoolco.com
Features:
Eliminate the hassle of
calculating proper
RMP’s for optimum tool life!
Precise
PRO/CALC MATERIAL DIRECTORY
SPINDLE SPEED ~ CHIP LOAD &
FEED RATE CALCULATOR
Simply Select
1. Material to be machined.
2. Operation to be performed.
3. Tool diameter to be used.
4. Number of cutter tips.
The recommended
RPM
and
FEED RATE
are
AUTOMATICALLY DISPLAYED
Also contains tap sizes in
English & metric, coarse & fine
and surface foot & surface
meter calculation.
MODEL No.
PRO-100
$59.95
REG. $74.95
With the Mill Caddy from Edge Technology you can now hang your vise handle, dead
blow hammer and air line from the front of the mill table. The Mill Caddy puts your
most frequently used tools at your finger tips yet out of the way allowing for a less
cluttered work area.
•
Designed to mount using T-slot on table front.
(mounting hardware included)
•
Made from high strength aluminum.
•
Durable red anodized finish.
•
Vise handle slot width (0.750 in)
•
Hammer slot width (1.125 in)
MODEL No.
06-000
Reg. $34.50
MILL CADDY
$24.95
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 170
•
The Pro Touch Off Gage allows you to
standardize the way tool offsets are
measured in your shop.
•
To use this gage just lower the tool
down onto the contact face until the
indicator reads zero, at that point you
can be confident that the tool tip is
exactly 4 inches from the surface the
Pro Touch Off Gage is sitting on.
•
Large 2.2 in easy to read indicator face.
•
Large 1 in diameter contact face allows
all flutes of the tool to make contact
•
Contact face is lightly spring loaded to
protect against overrun.
•
Body made from red anodized 6061-
T6 aluminum
•
Offset height 4.000 in
•
Gage repeatability 0.0002 in
•
Easy calibration using 1-2-3 blocks.
PRO TOUCH OFF GAGE
MODEL No.
04-000
Reg. $99.95
$84.95
Replacement
Contact Face
No. 04-001
$5.00
Model
No.
NSS-001
NSS-002
NSS-003
NSS-004
Graduation
.001"
.0005"
.0005"
.01mm
Total
Range
.250"
.125"
.125"
2.5mm
Distance
Centers
4"
4"
3"
101.6mm
Dial
Diameter
2-1/4"
2-1/4"
1-1/4"
2-1/4"
Price
Each
$159.95
175.00
175.00
175.00
......ALL STEEL
•
4" between contact points
•
Ground surface,
Solid Steel
Construction of body
•
Size is about 6 3/4 wide and 5 1/2 from
top of shank to end of contact points
•
Accuracy to .001 inch
•
Weight is about 4 lbs. for shipping,
with custom case
•
Fully assembled with two AGD 2 or AGD
dial indicators,.001", .0005", or .01mm
graduations.
•
Self Calibrating
– no other tools, shims,
blocks etc. required to calibrate
•
Large 2-1/4" or 1-1/4" diameter dial
indicators for easy reading; .250 or
.125"total range.
•
Patented.
QUILL RETURN
•
Eliminates the problem of quill lock
drag.
•
Maintains lever in lock position
without rubber bands or other
devices.
•
Easily attaches to locking lever.
Model No.
98-217-3
$13.50
The CNC Lathe Gage by Edge Technology is used to set lathe tools on the spindle
axis for optimum cutting conditions.
•
To use this gage first adjust it to match the angle of your slant bed lathe and install
the 1/4" shaft in a collet or chuck.
•
Then set one of the contact faces of the gage on the cutting edge of the tool.
•
Next adjust the tool until the bubble is centered in the level.
•
This procedure ensures the cutter is accurately placed on a plane that intersects
the rotational axis of the spindle. (Note: it is necessary for the lathe to be leveled
for the CNC Lathe gage to work properly)
•
Set turning, boring, and facing tools
on spindle axis for optimum cutting
conditions
•
Precision glass vial level with 30'/
2mm sensitivity
•
Cutter contact faces designed to work
with tools that have cutting edges facing
up as well as facing down
•
Angular adjustability of +/- 60° to match
any lathe slant bed angle
•
Hands free design
•
Ground steel shaft supported by dual
ball bearings.
•
Durable anodized finish with easy-to-
read engraved marks
•
Made from high strength aluminum
CNC LATHE GAGE
MODEL No.
13-000
$44.95
TAP AND REAMER LEVELS
•
The Tap Handle Level by Edge Technology is specifically designed to eliminate
tap breakage.
•
The most common cause of tap breakage is starting the tap into the hole at an
angle. The large bulls-eye-level in this unit allows the angle of the tap to be
monitored as it is started into the hole.
•
The unit is easily installed on any flat top tap handle and the magnetic recess of
the unit will secure it in place.
Set of 2 levels
1) Small .550" Diameter
1) Large .875" Diameter
MODEL No.
15-000
$22.95
Less Tap
Wrenches
•
Magnetic recess ensures
unit stays in position
•
Made from high strength
aluminum
•
Durable red anodize finish
Specifications:
No other book covers CNC control setup in such practical detail. This unique
reference from the author of the best-selling CNC Programming Handbook features
nearly all of the activities a typical CNC operator performs on a daily basis. Starting
with overall descriptions and in-depth explanations of various features, it goes much
further and is sure to be a valuable resource for anyone involved in CNC
•
Describes working with all types of offsets for
milling and turning applications, interpretation of
part programs, applying trial cuts, making program
changes, and much more.
•
Places emphasis on troubleshooting many
common problems that occur in CNC operations.
•
Presents suggested methods of correction, along
with methods of prevention.
INDUSTRIAL PRESS CNC CONTROL
SETUP FOR MILLING AND TURNING
No. 3350-3
Reg. $59.95
$44.95
For Additional details
Visit our website:
www.penntoolco.com
Features:
Eliminate the hassle of
calculating proper
RMP’s for optimum tool life!
Precise
PRO/CALC MATERIAL DIRECTORY
SPINDLE SPEED ~ CHIP LOAD &
FEED RATE CALCULATOR
Simply Select
1. Material to be machined.
2. Operation to be performed.
3. Tool diameter to be used.
4. Number of cutter tips.
The recommended
RPM
and
FEED RATE
are
AUTOMATICALLY DISPLAYED
Also contains tap sizes in
English & metric, coarse & fine
and surface foot & surface
meter calculation.
MODEL No.
PRO-100
$59.95
REG. $74.95
With the Mill Caddy from Edge Technology you can now hang your vise handle, dead
blow hammer and air line from the front of the mill table. The Mill Caddy puts your
most frequently used tools at your finger tips yet out of the way allowing for a less
cluttered work area.
•
Designed to mount using T-slot on table front.
(mounting hardware included)
•
Made from high strength aluminum.
•
Durable red anodized finish.
•
Vise handle slot width (0.750 in)
•
Hammer slot width (1.125 in)
MODEL No.
06-000
Reg. $34.50
MILL CADDY
$24.95
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 170
•
The Pro Touch Off Gage allows you to
standardize the way tool offsets are
measured in your shop.
•
To use this gage just lower the tool
down onto the contact face until the
indicator reads zero, at that point you
can be confident that the tool tip is
exactly 4 inches from the surface the
Pro Touch Off Gage is sitting on.
•
Large 2.2 in easy to read indicator face.
•
Large 1 in diameter contact face allows
all flutes of the tool to make contact
•
Contact face is lightly spring loaded to
protect against overrun.
•
Body made from red anodized 6061-
T6 aluminum
•
Offset height 4.000 in
•
Gage repeatability 0.0002 in
•
Easy calibration using 1-2-3 blocks.
PRO TOUCH OFF GAGE
MODEL No.
04-000
Reg. $99.95
$84.95
Replacement
Contact Face
No. 04-001
$5.00
Model
No.
NSS-001
NSS-002
NSS-003
NSS-004
Graduation
.001"
.0005"
.0005"
.01mm
Total
Range
.250"
.125"
.125"
2.5mm
Distance
Centers
4"
4"
3"
101.6mm
Dial
Diameter
2-1/4"
2-1/4"
1-1/4"
2-1/4"
Price
Each
$159.95
175.00
175.00
175.00
......ALL STEEL
•
4" between contact points
•
Ground surface,
Solid Steel
Construction of body
•
Size is about 6 3/4 wide and 5 1/2 from
top of shank to end of contact points
•
Accuracy to .001 inch
•
Weight is about 4 lbs. for shipping,
with custom case
•
Fully assembled with two AGD 2 or AGD
dial indicators,.001", .0005", or .01mm
graduations.
•
Self Calibrating
– no other tools, shims,
blocks etc. required to calibrate
•
Large 2-1/4" or 1-1/4" diameter dial
indicators for easy reading; .250 or
.125"total range.
•
Patented.
QUILL RETURN
•
Eliminates the problem of quill lock
drag.
•
Maintains lever in lock position
without rubber bands or other
devices.
•
Easily attaches to locking lever.
Model No.
98-217-3
$13.50
