Page 201 Penn Tool Co. Precision Tooling 2014 Sale Catalog
P. 201
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 201
KURT ULTIMATE 6" TOOL ROOM VISE
D-688 WITH BIG 8.8" OPENING
•
Outside rail edges of body are machined. This new edge allows you to
indicate alignment during set-up.
•
Vise nut does not extend beyond the end of the vise body.
•
GrooveLock jaw and workstop standard.
•
Patented "O" ring pull down feature standard.
•
Approximately a 20% increase in clamping force over D675 vise.
•
Patented Anglock design.
•
Repeatability within tenths.
•
80,000 PSI ductile iron construction.
•
Bed height matched to size, 2.875" within ±.0005".
•
Long life guaranteed, 10 year warranty.
Each pound of force in this direc-
tion.... induces 1/2 pound of force
in this direction
MODEL No.
D-688
Reg. List
$595.00
Machined edge of D688
vise allows precision align-
ment of vise when used on
Angle Plate with sine bar
for locating.
Optional Swivel Base
MODEL No.
D-60-4
$425.00
Ship Wt. 78 lbs.
VERSA LOCK
THE MODULAR VISE FOR
VERSATILE WORKHOLDING
Now get .0005” repeatable clamping accuracy and up to 12,600 lbs. clamping
force from the worlds most versatile vise.Your modular, 6 inch Kurt Versalock
Vise converts in to 12 different vises at any time your changing production
workholding requirements. Each is pre-engineered to do the exact workholding
job intended. Look what one Versa-lock vise become using simple field
conversion kits.
Standard vise, reverse vise, short vise,
short reverse vise, alt vise, reverse vise,
short air vise, short reverse air vise, hy-
draulic vise, reversal hyd. vise, short hyd.
vise, short reverse hyd. vise.
MODEL No.
3600V
Reg. List $794.00
NOW
6” Aluminum
Soft Jaws
a $29.50 Value
No. VJ-601
$19.95
$765.00
$549.95
KURT 6" MILLING VISE WITH 9" OPENING
•
Pull type body design reduces stress
in the body resulting in more accurate
clamping.
•
Quick change movable jaw. The HD
platform movable jaw allows for quick
change and carvability to hold that
odd shaped part.
•
Adaptable to hydraulic.
•
A full 9 inch opening
between jaws.
•
Less deflection of stationary jaw.
Wider more stable stationary jaw
equals less deflection.
•
Uses sine keys for adjustment.
•
Swivel base available.
•
Stationary jaw bolts down from top.
No need to remove from table to
disassemble vise. Bolting the
stationary from the top reduces the
stress in the body and will stay flatter
after assembly.
•
Narrower body width allows more
vises in the same work envelope.
•
Taller body design equals less
deflection under clamping loads.
•
Bolts and locates directly on standard
grid plates: 40mm, 50mm or 2 inch.
•
Groovelock® jaw and workstop
included.
MODEL No.
HDM690
Reg. $750.00
$679.50
Each pound of force
in this direction...
Induces 1.2 pound of force
in this direction
With Groove Lock Jaw & Work Stop
Model
D-30-50
D-50-50
D-80-5
Key Size
1/2 x 1/2"
11/16 x 11/16"
13/16 x 13/16" 8" & 10"
Vise
4"
6"
Price (Pr.)
$36.00
30.00
35.00
Model
D-30-30A
D-50-33A
D-50-33B
D-50-33C
D-50-33D
D-50-33E
D-80-33A
D-80-33B
D-80-33C
D-80-33D
Key Size
1/2 x 5/8"
11/16 x 5/8"
11/16 x 13/16"
11/16 x 3/4"
11/16 x 9/16"
11/16 x 1/2"
13/16 x 7/8" 8" & 10"
13/16 x 11/16" 8" & 10"
13/16 x 3/4" 8" & 10"
13/16 x 5/8" 8" & 10"
Price (Pr.)
$34.00
30.00
30.00
30.00
30.00
30.00
34.00
34.00
34.00
34.00
Vise
4"
6"
6"
6"
6"
6"
•
Hardened vise keys are used to align your Kurt vise to your milling machine
table.
•
Step keys are used when the keyway in the vise is different than that of the
machine T-slot.
•
Standard keys are used when they are the same width
KURT VISE KEYS
Hardened Standard Keys (Pair)
Hardened Step Keys (Pair)
• Powder coated paint resists flaking and •
peeling.
• 80,000 PSI ductile iron body with • Repeatability within .001"
increased nickel content for improved • Outside rails of body are machined
corrosion resistance.
• Hardened vise bed and jaw plated.
• Sealed and lubricated needle roller thrust. • Footprint and distance from the
bearing for maximum life and minimum
torque.
•
PWS-8110
has up to 12,000 lbs. of
clamping force.
Featuring the largest opening in its class and a more robust main screw that can
handle higher torque loads and transmit higher clamping pressure. The angled slide
and locking jaw design prevents lifting of the moveable jaw.
PWS-6900
has up to 8,200 lbs of
clamping force
within 0.0005" square to jaw.
• Bed height matched to size +/-0.0005"
keyway to stationary jaw meets
industry standard.
PRECISION MILLING VISES
6" x 9" Opening & 8" x 11" Opening
6" x 9" Opening
MODEL No.
PWS-6900
Reg. $495.00
$459.95
8" x 11" Opening
MODEL No.
PWS-8110
Reg. $1465.00
$1395.00
Limited
LIFE
TIME
Warranty
Vise with Hard Jaws
✔
Outside carrier jaws manufactured
from high quality aluminum material.
ReLOCK DOUBLE STATION VISES
®
•
Compact modular design allows a
multitude of mounting configurations.
•
Exclusive auto offset mechanism allows
non-simultaneous work piece clamping
and unclamping.
Features:
✔
Body manufactured from 80,000 PSI
ductile cast iron.
✔
Ways flame hardened to 40 R/C
maximum and ground to accuracies of
±.0005"
•
Exclusive SnapLock knuckle allows
SnapLock soft and carrier jaws to be
attached and removed in seconds.
•
Chip shields completely wrap around
the SnapLock knuckles, keeping chips
out. Can be removed easily for
maintenance.
Model
No.
RWS-400SJ
RWS-600SJ
RWS-800SJ
RWS-400HS
RWS-600HS
RWS-800HS
Vise
Width
4"
6"
8"
4"
6"
8"
Vise
Length
16.000" 2.500"
20.500" 3.250" 12,000 lbs.
28.500" 4.000" 16,000 lbs.
16.000" 2.500"
20.500" 3.250" 12,000 lbs.
28.500" 4.000" 16,000 lbs.
Carrier
Height
Clamping
Pressure
6,000 lbs. $1198.00
6,000 lbs. $1525.00
List
Price
1517.00
4253.00
1759.00
4995.00
Sale
Price
$1095.00
1390.00
3975.00
$1375.00
1590.00
4875.00
Vise Carrier with Soft Machinable 3 Piece Jaw Set
Vise Carrier with 2 Carrier & 3 Piece Hard Jaws
Vise Carrier
Vise Carrier with
3 Piece Jaw Set
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 201
KURT ULTIMATE 6" TOOL ROOM VISE
D-688 WITH BIG 8.8" OPENING
•
Outside rail edges of body are machined. This new edge allows you to
indicate alignment during set-up.
•
Vise nut does not extend beyond the end of the vise body.
•
GrooveLock jaw and workstop standard.
•
Patented "O" ring pull down feature standard.
•
Approximately a 20% increase in clamping force over D675 vise.
•
Patented Anglock design.
•
Repeatability within tenths.
•
80,000 PSI ductile iron construction.
•
Bed height matched to size, 2.875" within ±.0005".
•
Long life guaranteed, 10 year warranty.
Each pound of force in this direc-
tion.... induces 1/2 pound of force
in this direction
MODEL No.
D-688
Reg. List
$595.00
Machined edge of D688
vise allows precision align-
ment of vise when used on
Angle Plate with sine bar
for locating.
Optional Swivel Base
MODEL No.
D-60-4
$425.00
Ship Wt. 78 lbs.
VERSA LOCK
THE MODULAR VISE FOR
VERSATILE WORKHOLDING
Now get .0005” repeatable clamping accuracy and up to 12,600 lbs. clamping
force from the worlds most versatile vise.Your modular, 6 inch Kurt Versalock
Vise converts in to 12 different vises at any time your changing production
workholding requirements. Each is pre-engineered to do the exact workholding
job intended. Look what one Versa-lock vise become using simple field
conversion kits.
Standard vise, reverse vise, short vise,
short reverse vise, alt vise, reverse vise,
short air vise, short reverse air vise, hy-
draulic vise, reversal hyd. vise, short hyd.
vise, short reverse hyd. vise.
MODEL No.
3600V
Reg. List $794.00
NOW
6” Aluminum
Soft Jaws
a $29.50 Value
No. VJ-601
$19.95
$765.00
$549.95
KURT 6" MILLING VISE WITH 9" OPENING
•
Pull type body design reduces stress
in the body resulting in more accurate
clamping.
•
Quick change movable jaw. The HD
platform movable jaw allows for quick
change and carvability to hold that
odd shaped part.
•
Adaptable to hydraulic.
•
A full 9 inch opening
between jaws.
•
Less deflection of stationary jaw.
Wider more stable stationary jaw
equals less deflection.
•
Uses sine keys for adjustment.
•
Swivel base available.
•
Stationary jaw bolts down from top.
No need to remove from table to
disassemble vise. Bolting the
stationary from the top reduces the
stress in the body and will stay flatter
after assembly.
•
Narrower body width allows more
vises in the same work envelope.
•
Taller body design equals less
deflection under clamping loads.
•
Bolts and locates directly on standard
grid plates: 40mm, 50mm or 2 inch.
•
Groovelock® jaw and workstop
included.
MODEL No.
HDM690
Reg. $750.00
$679.50
Each pound of force
in this direction...
Induces 1.2 pound of force
in this direction
With Groove Lock Jaw & Work Stop
Model
D-30-50
D-50-50
D-80-5
Key Size
1/2 x 1/2"
11/16 x 11/16"
13/16 x 13/16" 8" & 10"
Vise
4"
6"
Price (Pr.)
$36.00
30.00
35.00
Model
D-30-30A
D-50-33A
D-50-33B
D-50-33C
D-50-33D
D-50-33E
D-80-33A
D-80-33B
D-80-33C
D-80-33D
Key Size
1/2 x 5/8"
11/16 x 5/8"
11/16 x 13/16"
11/16 x 3/4"
11/16 x 9/16"
11/16 x 1/2"
13/16 x 7/8" 8" & 10"
13/16 x 11/16" 8" & 10"
13/16 x 3/4" 8" & 10"
13/16 x 5/8" 8" & 10"
Price (Pr.)
$34.00
30.00
30.00
30.00
30.00
30.00
34.00
34.00
34.00
34.00
Vise
4"
6"
6"
6"
6"
6"
•
Hardened vise keys are used to align your Kurt vise to your milling machine
table.
•
Step keys are used when the keyway in the vise is different than that of the
machine T-slot.
•
Standard keys are used when they are the same width
KURT VISE KEYS
Hardened Standard Keys (Pair)
Hardened Step Keys (Pair)
• Powder coated paint resists flaking and •
peeling.
• 80,000 PSI ductile iron body with • Repeatability within .001"
increased nickel content for improved • Outside rails of body are machined
corrosion resistance.
• Hardened vise bed and jaw plated.
• Sealed and lubricated needle roller thrust. • Footprint and distance from the
bearing for maximum life and minimum
torque.
•
PWS-8110
has up to 12,000 lbs. of
clamping force.
Featuring the largest opening in its class and a more robust main screw that can
handle higher torque loads and transmit higher clamping pressure. The angled slide
and locking jaw design prevents lifting of the moveable jaw.
PWS-6900
has up to 8,200 lbs of
clamping force
within 0.0005" square to jaw.
• Bed height matched to size +/-0.0005"
keyway to stationary jaw meets
industry standard.
PRECISION MILLING VISES
6" x 9" Opening & 8" x 11" Opening
6" x 9" Opening
MODEL No.
PWS-6900
Reg. $495.00
$459.95
8" x 11" Opening
MODEL No.
PWS-8110
Reg. $1465.00
$1395.00
Limited
LIFE
TIME
Warranty
Vise with Hard Jaws
✔
Outside carrier jaws manufactured
from high quality aluminum material.
ReLOCK DOUBLE STATION VISES
®
•
Compact modular design allows a
multitude of mounting configurations.
•
Exclusive auto offset mechanism allows
non-simultaneous work piece clamping
and unclamping.
Features:
✔
Body manufactured from 80,000 PSI
ductile cast iron.
✔
Ways flame hardened to 40 R/C
maximum and ground to accuracies of
±.0005"
•
Exclusive SnapLock knuckle allows
SnapLock soft and carrier jaws to be
attached and removed in seconds.
•
Chip shields completely wrap around
the SnapLock knuckles, keeping chips
out. Can be removed easily for
maintenance.
Model
No.
RWS-400SJ
RWS-600SJ
RWS-800SJ
RWS-400HS
RWS-600HS
RWS-800HS
Vise
Width
4"
6"
8"
4"
6"
8"
Vise
Length
16.000" 2.500"
20.500" 3.250" 12,000 lbs.
28.500" 4.000" 16,000 lbs.
16.000" 2.500"
20.500" 3.250" 12,000 lbs.
28.500" 4.000" 16,000 lbs.
Carrier
Height
Clamping
Pressure
6,000 lbs. $1198.00
6,000 lbs. $1525.00
List
Price
1517.00
4253.00
1759.00
4995.00
Sale
Price
$1095.00
1390.00
3975.00
$1375.00
1590.00
4875.00
Vise Carrier with Soft Machinable 3 Piece Jaw Set
Vise Carrier with 2 Carrier & 3 Piece Hard Jaws
Vise Carrier
Vise Carrier with
3 Piece Jaw Set
