Page 196 Penn Tool Co. Precision Tooling 2014 Sale Catalog
P. 196
•
The Cam Action Clamp is a low profile quick action
clamp.
•
Jaw pivots forward and downward at the same time
when the handle is turned.
•
Clamp locks positively at any position within its 180º
turn allowing it to hold parts that vary slightly in
dimension.
CAM ACTION CLAMP
•
The Cam Action Clamp with
the extended base allows
position adjustment on
machine tables.
Model
850290
850295
850300
850305
Base
Standard
Extended
Standard
Extended
Stud
5/16-18"
5/16-18"
1/2-13"
1/2-13"
Dimensions
1.25"W x 1"H x 1.75"L
1.25"W x 1"H x 3.13"L
1.88"W x 1.5"H x 2.75"L
1.88"W x 1.5"H x 1.75"L
Price
$ 79.95
89.95
99.95
105.00
Model
No.
2420-0014
2420-0024
2420-0033
2420-0042
Capacity
Diameter
.24" - .55"
.51" - .91"
.79" - 1.30"
1.22" - 1.65"
Price
Each
$29.95
32.95
39.95
45.00
Precise
GRINDING DRIVING CARRIERS
• Suitable for grinding of shafts.
• Easy attach and detach.
• Precision Steel Castings
KURT 3-IN-ONE SYSTEM
JAW PLATE SETS
•
Ideal for quick setup of common angle
cuts.
•
Preset patterns in jaws provide these 7
popular angles: 5º, 10º, 15º, 20º, 25º,
30º, 45º.
•
Tolerance between holes 0.0004"
(0.01mm)
•
KSJ6
6" x 1.735" x 0.725" ±0.000787"
(±0.02mm)
KSJ8
8" x 2.20" x 1.075" ±0.000787"
(±0.02mm)
•
Pins sets included are:
4 ea. 6mmx22mm 3 ea. 6mmx40mm
3 ea. 6mmx58mm 3 ea. 6mmx76mm
•
Pinsets Dimensional Tolerance:
±0.0007" (0.018mm)
•
Doubles as a conventional workstop,
Triples as a parallel. Does the work of
3 products.
6" SET No.
KSJ6
$289.95
8" SET No.
KSJ8
$529.95
Model
KWT-001
KWT-002
Description
Kwik Tilt Sine Block Table
Extra Set of 10 Kwik Pin Gages for
increments of 1, 2, 3, 4 and 5 degrees
Price
$650.00
30.00
• Use a 6" Angle-Lock or Accu-Lock • Precise machined and ground surfaces.
type Vise you already have on the • Working area is 5.0~4.8” x 10.0~9.8”.
machine, no need to clear and clean
the machine table or remove existing • Angularity +30 seconds from the jaw
set ups, no need to tilt the spindle.
• Hard anodized 6061-t6 Aluminum • Set of four (4) .5000” Pins for the
alloy.
NOTE: For other angles use Gage Blocks that shall be calculated using a
sine table for a hypotenuse of 5.0000”.Gage blocks shall not exceed 0.500”
SINE BLOCK TABLE
It comes
plane.
Correspondent Holes.
It Only Takes a Few Minutes to Set Up, Not Hours!
From zero degrees to any
angle in a minute!
ANTI-CHATTER GRINDING FIXTURE
It is designed and built with a perfect combination of weights and counterbal-
ances. Weights are easily positioned by the operator (because different shapes
and types of material require different balance attitudes). Arm, which is over 4"
long, can be lowered (out of the way) when measuring work. Lever and weight
mechanisms are perfectly tuned and mounted on a heavy steel base. Fits all types
of Grinding Machines- for wheels of diamond, silicon carbide, etc.
MODEL No.
14260
$110.00
Base Dimensions:
2-1/2"W x 2"H x 3/4"D
•
Dampens vibration substantially.
•
Hence saves $$ on Diamond Wheels.
•
Prevents wheel breakage.
•
Gives you better microinch finish
and better workpiece geometry
Precise
UNI-VISE
GRINDING FIXTURE
•
For use on a grinder or milling machine.
•
Adjust the 4 screw nuts to set the required
angle for precision grinding on solid
carbide end mills, drills, tool bits as well as
engraving cutters of various shapes, angles
and diameters.
•
It can also clamp workpiece for machining
on various angles.
•
Parallelism of the cutter carrier to the
bottom: 0.001
•
Base dimension: 6.3" x 7.1"
•
Weight: 18 lbs.
$159.95
MODEL No.
202-2615
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Model
30801
30802
30805
30806
Description
MD-1200 w/1 Line, Micro-Dispenser $573.50
MD-1200 w/2 Lines, Micro-Dispenser
MD-1200 w/1 Line, w/Solenoid
MD-1200 w/2 Lines, w/Solenoid
List
689.50
$649.50
805.50
Sale
$525.00
635.00
$585.00
750.00
For Manual Machines
With Solenoid For CNC Machines
•
Solenoid versions allow these units to be interfaced with CNC controls or other
signaling devices. The pressurized delivery system provides instant on/off performance
when used with the solenoid control.
FEATURES:
•
Simple easy-to-use controls. No confusing
timer to set.
•
Relative liquid scale allows repeatable
set-ups and saves time in adjusting flow
rates for different applications.
•
Typical applications use 1 oz. of lubricant
in an 8-hour shift.
•
Positive pressure design gives instant fluid
delivery for faster cycle times.
•
The anti-siphon valves permit the
nozzle to be mounted in any position.
•
Independent controls allow for
maximum flexibility in adjusting
liquid and air flow for each nozzle.
•
High energy nozzle design eliminates
fogging for cleaner environment and
greater chip clearing power, allowing
faster speed and feeds.
MICRO-DROP DISPENSER
®
Page 196
The Cam Action Clamp is a low profile quick action
clamp.
•
Jaw pivots forward and downward at the same time
when the handle is turned.
•
Clamp locks positively at any position within its 180º
turn allowing it to hold parts that vary slightly in
dimension.
CAM ACTION CLAMP
•
The Cam Action Clamp with
the extended base allows
position adjustment on
machine tables.
Model
850290
850295
850300
850305
Base
Standard
Extended
Standard
Extended
Stud
5/16-18"
5/16-18"
1/2-13"
1/2-13"
Dimensions
1.25"W x 1"H x 1.75"L
1.25"W x 1"H x 3.13"L
1.88"W x 1.5"H x 2.75"L
1.88"W x 1.5"H x 1.75"L
Price
$ 79.95
89.95
99.95
105.00
Model
No.
2420-0014
2420-0024
2420-0033
2420-0042
Capacity
Diameter
.24" - .55"
.51" - .91"
.79" - 1.30"
1.22" - 1.65"
Price
Each
$29.95
32.95
39.95
45.00
Precise
GRINDING DRIVING CARRIERS
• Suitable for grinding of shafts.
• Easy attach and detach.
• Precision Steel Castings
KURT 3-IN-ONE SYSTEM
JAW PLATE SETS
•
Ideal for quick setup of common angle
cuts.
•
Preset patterns in jaws provide these 7
popular angles: 5º, 10º, 15º, 20º, 25º,
30º, 45º.
•
Tolerance between holes 0.0004"
(0.01mm)
•
KSJ6
6" x 1.735" x 0.725" ±0.000787"
(±0.02mm)
KSJ8
8" x 2.20" x 1.075" ±0.000787"
(±0.02mm)
•
Pins sets included are:
4 ea. 6mmx22mm 3 ea. 6mmx40mm
3 ea. 6mmx58mm 3 ea. 6mmx76mm
•
Pinsets Dimensional Tolerance:
±0.0007" (0.018mm)
•
Doubles as a conventional workstop,
Triples as a parallel. Does the work of
3 products.
6" SET No.
KSJ6
$289.95
8" SET No.
KSJ8
$529.95
Model
KWT-001
KWT-002
Description
Kwik Tilt Sine Block Table
Extra Set of 10 Kwik Pin Gages for
increments of 1, 2, 3, 4 and 5 degrees
Price
$650.00
30.00
• Use a 6" Angle-Lock or Accu-Lock • Precise machined and ground surfaces.
type Vise you already have on the • Working area is 5.0~4.8” x 10.0~9.8”.
machine, no need to clear and clean
the machine table or remove existing • Angularity +30 seconds from the jaw
set ups, no need to tilt the spindle.
• Hard anodized 6061-t6 Aluminum • Set of four (4) .5000” Pins for the
alloy.
NOTE: For other angles use Gage Blocks that shall be calculated using a
sine table for a hypotenuse of 5.0000”.Gage blocks shall not exceed 0.500”
SINE BLOCK TABLE
It comes
plane.
Correspondent Holes.
It Only Takes a Few Minutes to Set Up, Not Hours!
From zero degrees to any
angle in a minute!
ANTI-CHATTER GRINDING FIXTURE
It is designed and built with a perfect combination of weights and counterbal-
ances. Weights are easily positioned by the operator (because different shapes
and types of material require different balance attitudes). Arm, which is over 4"
long, can be lowered (out of the way) when measuring work. Lever and weight
mechanisms are perfectly tuned and mounted on a heavy steel base. Fits all types
of Grinding Machines- for wheels of diamond, silicon carbide, etc.
MODEL No.
14260
$110.00
Base Dimensions:
2-1/2"W x 2"H x 3/4"D
•
Dampens vibration substantially.
•
Hence saves $$ on Diamond Wheels.
•
Prevents wheel breakage.
•
Gives you better microinch finish
and better workpiece geometry
Precise
UNI-VISE
GRINDING FIXTURE
•
For use on a grinder or milling machine.
•
Adjust the 4 screw nuts to set the required
angle for precision grinding on solid
carbide end mills, drills, tool bits as well as
engraving cutters of various shapes, angles
and diameters.
•
It can also clamp workpiece for machining
on various angles.
•
Parallelism of the cutter carrier to the
bottom: 0.001
•
Base dimension: 6.3" x 7.1"
•
Weight: 18 lbs.
$159.95
MODEL No.
202-2615
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Model
30801
30802
30805
30806
Description
MD-1200 w/1 Line, Micro-Dispenser $573.50
MD-1200 w/2 Lines, Micro-Dispenser
MD-1200 w/1 Line, w/Solenoid
MD-1200 w/2 Lines, w/Solenoid
List
689.50
$649.50
805.50
Sale
$525.00
635.00
$585.00
750.00
For Manual Machines
With Solenoid For CNC Machines
•
Solenoid versions allow these units to be interfaced with CNC controls or other
signaling devices. The pressurized delivery system provides instant on/off performance
when used with the solenoid control.
FEATURES:
•
Simple easy-to-use controls. No confusing
timer to set.
•
Relative liquid scale allows repeatable
set-ups and saves time in adjusting flow
rates for different applications.
•
Typical applications use 1 oz. of lubricant
in an 8-hour shift.
•
Positive pressure design gives instant fluid
delivery for faster cycle times.
•
The anti-siphon valves permit the
nozzle to be mounted in any position.
•
Independent controls allow for
maximum flexibility in adjusting
liquid and air flow for each nozzle.
•
High energy nozzle design eliminates
fogging for cleaner environment and
greater chip clearing power, allowing
faster speed and feeds.
MICRO-DROP DISPENSER
®
Page 196
