Page 366 Penn Tool Co. Precision Tooling 2014 Sale Catalog
P. 366
24" PLANISHING HAMMER
•
Smooths beads and forms mild steel
sheet metal up to 16 gauge.
•
Smooths beads and forms aluminum
and cooper up to 1/8" thick.
•
Machine supplied with 2-pair of
upper and anvil die sets.
•
3-position airflow regulates speeds
of pneumatic hammer.
•
Machine controlled with 110vac foot
control.
•
2-die set brackets.
•
Quick change of upper dies.
Specifications:
Frame tube size . . . . . . . . . . 4" x 4"
Throat . . . . . . . . . . . . . . . . . . . 24"
Head opening . . . . . . . . . . . . 2-1/2"
Maximum pressure (PSI) . . . . . . . 90
Air consumption (CFM) . . . . . . . 8.8
3-speed regulator (bits per min)-
4400-4600/3200-3500/1800-2000
Noise level (dB) . . . . . .92.26-104.3
Approx. weight . . . . . . . . . 220 lbs.
$1650.00 MODEL No.
PH-24
45" ENGLISH WHEEL
•
Rolls beads and forms mild steel
sheet metal up to 16 gauge.
•
Rolls beads and forms aluminum
and copper up to 1/8" thick.
•
Machine supplied with 10 anvils and
4 rolling wheels.
•
Three sets of popular fender groove
shaping wheels.
•
Screw lift assembly designed for
comfortability and precise pressure
setup.
•
Quick cam handle releases the work
piece.
•
Both wheels swivel 90º
•
Quick wheel change without using
any tooling.
•
Throat 45"
•
Wheels supplied with sealed bearings
for smooth operation.
•
Heavy duty frame.
•
Storage brackets for rolling and anvil
wheels.
•
Rolling wheels 6" diameter.
$2475.00 MODEL No.
WH-45
Specifications:
Frame tube size . . . . . . . . . . 4" x 4"
Throat . . . . . . . . . . . . . . . . . . . 45"
Head opening . . . . . . . . . . . . . . . 6"
Head and anvil sit swivel . . . . . . 90º
Rolling wheels diameter . . . . . . . 6"
Dimensions HxWxD 64" x 31" x 58"
Approx. weight . . . . . . . . . 550 lbs
THE NEW 50 TON DURA-PRESS
Built tough for the metalworking craftsman.
A press and a name you can depend on for
your most difficult pressing applications. This
substantial press has a heavy duty, arc-welded
channel steel frame and a large 6" bore hy-
draulic cylinder. Operating pressure is low for
long life and safety The new, easy to use
"joystick" 4-way valve is standard equipment
for precise ram control. If you need repeat-
ability, the optional remote pressure control
can be installed at any time. The 16" stroke is
long enough for broaching. Single phase for
plug and press.
Specifications:
Capacity: 50 tons
Rams travel: 16"
Bore: 6" Ram: 4"
Operating PSI: 3,537 @ 50 tons
Horse Power: 2 HP
120/220 volt - 1PH
Controls: Joystick operation
Pressing speed: 11" IPM
Return speed: 20" IPM
Max. Ram to table: 41-3/4"
Min. Ram to table: 0"
Width between uprights: 44"
Width between table channels: 8-1/4"
Floor space: 55"x 36"
Height: 94"
Weight: 1,550 lbs.
$6125.00
MODEL No.
DDP-500
THE
NEW
POWER HAMMER
Built tough for the metalworking craftsman.
Opens up a whole new world of metal shaping
creativity. Ideal tool for fabricating one-of-a-kind or
impossible-to-find replacement parts. Design and
form custom hot rod, motorcycle, aviation and
sheet metal parts that are works of art in your own
shop. You can stretch, shrink, planish, dome, jog,
bead and shape complex sheet metal parts using
standard dies. If you can't buy it build it yourself on
a Dake power hammer.
Specifications:
16 gauge steel capacity
11 gauge aluminum capacity (Annealed 3003H14)
120 volt - use it anywhere
Horse power - 1HP
900 strokes per minute hammer speed
18" throat
7" maximum opening with infinitely adjustable
bottom die holder
One set of thumbnail shrinking dies included as
standard equipment
Die set; industry standard 3/4" (19mm) square
tool post for standard shrinking or stretching
square shank die sets
Wheels on base included for portability & storage
24" wide x 33" long x 56" high, 320 Lbs.
Complete with manual, instructional video, and
1 year warranty
Patent pending
MODEL No.
DPH-100
$5995.00
HAND-HYDRAULIC PRESSES
•
Hand operation for economical
performance.
•
Rapid ram return starts ram return as
soon as release valve is opened and
may be stopped at any point by
closing the valve.
•
By-pass hole prevents excessive ram
extension.
•
Adjustable table permits easy vertical
movement by means of self locking
hoist.
•
Rapid screw traverse of ram permits
quick, easy movement of the ram by
means of a convenient handwheel.
•
Movable workhead is roller mounted
on ball bearings for off-center
positioning
(except 25 ton model).
Includes:
•
Frame.
•
Two forged steel table plates (25
ton model has two combination
table plates with V-blocks).
•
Workhead.
•
Flat ram nose.
•
V-ram nose (except 25 ton model)
•
Pressure gage.
•
Self-locking table hoist.
4-1/2" ANGLE GRINDERS
•
Jam-Pot low profile gear case provides
precise gear alignment.
•
Quick change wheel release allows
the user to remove wheels without
using a wrench.
•
Oversized, protected spindle lock
button.
•
E-clutch™ shuts the grinder off during
a sudden stall.
•
Dust Ejection System™ increases
durability.
•
Two position side handle, depressed
center wheel, adjustable.
No. D28402
Paddle
Switch
No. D2810
Switch
Slide
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 366
Model
D28110
D28402
Amps
7.0
10.0
RPM
11,000
11,000
Length
10.75"
11.25"
Weight
4.1 lbs.
4.6 lbs.
List
$111.30
165.00
Sale
$ 69.95
109.95
Specifications:
MODEL 07001
Capacity (Tons) . . . . . 25
Height overall . . . . . 76"
Floor Space . . 30x42-1/2"
Table Travel . . . . . . . 35"
Screw Travel . . . . . . . 5"
Max. Work Width . . 33-1/2"
Max. Work Height . . . . . 39"
Max. Work Arbor . . .5-3/16"
Ram Travel . . . . . . . . . . . 5"
Weight . . . . . . . . . . 450 lbs.
Sale $2,995.00
07002
50
85"
36x43-1/2"
35"
7"
32-3/4"
40"
7-1/4"
4"
810 lbs.
$3,985.00
07003
75
87"
36x55"
30"
7"
44"
36"
8-1/4"
4-1/2"
1,245 lbs.
$4,845.00
07005
125
95"
66x42""
25"
8"
48"
25"
12-1/8"
8"
2,750 lbs.
$13,700.00
•
Smooths beads and forms mild steel
sheet metal up to 16 gauge.
•
Smooths beads and forms aluminum
and cooper up to 1/8" thick.
•
Machine supplied with 2-pair of
upper and anvil die sets.
•
3-position airflow regulates speeds
of pneumatic hammer.
•
Machine controlled with 110vac foot
control.
•
2-die set brackets.
•
Quick change of upper dies.
Specifications:
Frame tube size . . . . . . . . . . 4" x 4"
Throat . . . . . . . . . . . . . . . . . . . 24"
Head opening . . . . . . . . . . . . 2-1/2"
Maximum pressure (PSI) . . . . . . . 90
Air consumption (CFM) . . . . . . . 8.8
3-speed regulator (bits per min)-
4400-4600/3200-3500/1800-2000
Noise level (dB) . . . . . .92.26-104.3
Approx. weight . . . . . . . . . 220 lbs.
$1650.00 MODEL No.
PH-24
45" ENGLISH WHEEL
•
Rolls beads and forms mild steel
sheet metal up to 16 gauge.
•
Rolls beads and forms aluminum
and copper up to 1/8" thick.
•
Machine supplied with 10 anvils and
4 rolling wheels.
•
Three sets of popular fender groove
shaping wheels.
•
Screw lift assembly designed for
comfortability and precise pressure
setup.
•
Quick cam handle releases the work
piece.
•
Both wheels swivel 90º
•
Quick wheel change without using
any tooling.
•
Throat 45"
•
Wheels supplied with sealed bearings
for smooth operation.
•
Heavy duty frame.
•
Storage brackets for rolling and anvil
wheels.
•
Rolling wheels 6" diameter.
$2475.00 MODEL No.
WH-45
Specifications:
Frame tube size . . . . . . . . . . 4" x 4"
Throat . . . . . . . . . . . . . . . . . . . 45"
Head opening . . . . . . . . . . . . . . . 6"
Head and anvil sit swivel . . . . . . 90º
Rolling wheels diameter . . . . . . . 6"
Dimensions HxWxD 64" x 31" x 58"
Approx. weight . . . . . . . . . 550 lbs
THE NEW 50 TON DURA-PRESS
Built tough for the metalworking craftsman.
A press and a name you can depend on for
your most difficult pressing applications. This
substantial press has a heavy duty, arc-welded
channel steel frame and a large 6" bore hy-
draulic cylinder. Operating pressure is low for
long life and safety The new, easy to use
"joystick" 4-way valve is standard equipment
for precise ram control. If you need repeat-
ability, the optional remote pressure control
can be installed at any time. The 16" stroke is
long enough for broaching. Single phase for
plug and press.
Specifications:
Capacity: 50 tons
Rams travel: 16"
Bore: 6" Ram: 4"
Operating PSI: 3,537 @ 50 tons
Horse Power: 2 HP
120/220 volt - 1PH
Controls: Joystick operation
Pressing speed: 11" IPM
Return speed: 20" IPM
Max. Ram to table: 41-3/4"
Min. Ram to table: 0"
Width between uprights: 44"
Width between table channels: 8-1/4"
Floor space: 55"x 36"
Height: 94"
Weight: 1,550 lbs.
$6125.00
MODEL No.
DDP-500
THE
NEW
POWER HAMMER
Built tough for the metalworking craftsman.
Opens up a whole new world of metal shaping
creativity. Ideal tool for fabricating one-of-a-kind or
impossible-to-find replacement parts. Design and
form custom hot rod, motorcycle, aviation and
sheet metal parts that are works of art in your own
shop. You can stretch, shrink, planish, dome, jog,
bead and shape complex sheet metal parts using
standard dies. If you can't buy it build it yourself on
a Dake power hammer.
Specifications:
16 gauge steel capacity
11 gauge aluminum capacity (Annealed 3003H14)
120 volt - use it anywhere
Horse power - 1HP
900 strokes per minute hammer speed
18" throat
7" maximum opening with infinitely adjustable
bottom die holder
One set of thumbnail shrinking dies included as
standard equipment
Die set; industry standard 3/4" (19mm) square
tool post for standard shrinking or stretching
square shank die sets
Wheels on base included for portability & storage
24" wide x 33" long x 56" high, 320 Lbs.
Complete with manual, instructional video, and
1 year warranty
Patent pending
MODEL No.
DPH-100
$5995.00
HAND-HYDRAULIC PRESSES
•
Hand operation for economical
performance.
•
Rapid ram return starts ram return as
soon as release valve is opened and
may be stopped at any point by
closing the valve.
•
By-pass hole prevents excessive ram
extension.
•
Adjustable table permits easy vertical
movement by means of self locking
hoist.
•
Rapid screw traverse of ram permits
quick, easy movement of the ram by
means of a convenient handwheel.
•
Movable workhead is roller mounted
on ball bearings for off-center
positioning
(except 25 ton model).
Includes:
•
Frame.
•
Two forged steel table plates (25
ton model has two combination
table plates with V-blocks).
•
Workhead.
•
Flat ram nose.
•
V-ram nose (except 25 ton model)
•
Pressure gage.
•
Self-locking table hoist.
4-1/2" ANGLE GRINDERS
•
Jam-Pot low profile gear case provides
precise gear alignment.
•
Quick change wheel release allows
the user to remove wheels without
using a wrench.
•
Oversized, protected spindle lock
button.
•
E-clutch™ shuts the grinder off during
a sudden stall.
•
Dust Ejection System™ increases
durability.
•
Two position side handle, depressed
center wheel, adjustable.
No. D28402
Paddle
Switch
No. D2810
Switch
Slide
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 366
Model
D28110
D28402
Amps
7.0
10.0
RPM
11,000
11,000
Length
10.75"
11.25"
Weight
4.1 lbs.
4.6 lbs.
List
$111.30
165.00
Sale
$ 69.95
109.95
Specifications:
MODEL 07001
Capacity (Tons) . . . . . 25
Height overall . . . . . 76"
Floor Space . . 30x42-1/2"
Table Travel . . . . . . . 35"
Screw Travel . . . . . . . 5"
Max. Work Width . . 33-1/2"
Max. Work Height . . . . . 39"
Max. Work Arbor . . .5-3/16"
Ram Travel . . . . . . . . . . . 5"
Weight . . . . . . . . . . 450 lbs.
Sale $2,995.00
07002
50
85"
36x43-1/2"
35"
7"
32-3/4"
40"
7-1/4"
4"
810 lbs.
$3,985.00
07003
75
87"
36x55"
30"
7"
44"
36"
8-1/4"
4-1/2"
1,245 lbs.
$4,845.00
07005
125
95"
66x42""
25"
8"
48"
25"
12-1/8"
8"
2,750 lbs.
$13,700.00
