Page 370 Penn Tool Co. Precision Tooling 2014 Sale Catalog
P. 370
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 370
PRECISION 3" CUT-OFF SAW
•
Easy to setup and operate. Cuts a wide range of materials.
•
•
Uses safe, inexpensive cutting wheels. Makes precision cuts.
•
•
Thin, high-speed wheel leaves minimal burr.
Features:
•
High speed spindle with sealed ball bearings. Rubberized deburring wheel
•
•
Industrial quality timing belt. Industrial grade on-off switch.
•
•
.035 x 3" dia. fully reinforced cut-off wheels. 10,000 RPM 1/5 HP motor.
•
•
Precision machine tool quality vise with reversible jaw attachments.
Note: The cutting wheels listed above have been selected and developed
specifically for the Coastel 3" saw. They are balanced wheels, and are
formulated for optimum cutting and life. We recommend only these parts for
replacements.
Abrasive Cut-Off Wheels. Reinforced 3" x.035"- .040" x 1/4" Hole
Silicon Carbide
Wheels, 60 & 100 Grit
6" CARBIDE TOOL GRINDER
•
Standard equipment includes large tool table
for each wheel, machine tool lamp, protractor
type tool rest and coolant pot with spout.
•
Equipped with a locked, double row bearing, for use with diamond wheels.
•
Wheel flanges are guaranteed not to exceed .002 T.I.R. at the periphery.
•
Powered with a 1/2 horsepower heavy duty reversible motor.
1/2 H.P. 3600 Idle RPM's
$1395.00
PLATED DIAMOND
6"GRINDING WHEELS
6" DIAMOND WHEEL TOOL GRINDER
MODEL No. 522
Reg. List $1653.00
Less Wheels
$1550.00
1/2 H.P. 115V
MODEL No.
500-002
Reg. List
$1470.00
For fast carbide removal or fine finish very
cool cutting without corner breakdown.
• 6" diameter• 1-1/4" hole. • 3/4" thick.
• 100% concentration plated wheels.
Less Wheels
$45.00 Each
MODEL No.
CTS-300-1
Complete
11 lbs. 115 Volts
$495.00
Cut Off Saw
with Mitre Vise
MODEL No. CTS-300-M
$495.00
MINI MITER 3" CHOP SAW
$295.00
MODEL No.
37-160
With Carbide
Tipped Wheel
No. 28-729
Resin-bond cut-off wheel
3-1/8" x 1/32" x 3/8"
$4.95 Each
No. 28-732
Carbide tipped saw blade
3-1/8" x 1/16" x 3/8"
$45.00
4000 RPM's
200 Watt
Motor
Model
ACO-301
CCO-302
FCO-303
EXL-201
CSO-501
Best Suited For Cutting
Stainless Steel, Nickel alloys, Mild Steel
Aluminum, Copper, Brass
Tool Steel, Hardened Steel, Alloys
Unitized Deburr Wheel, 1-1/2" x 1/4" x 1/8"
Combination cut off wheel & Deburr kit
(2 each of the above)
Price
$ 4.95
4.95
4.95
6.50
35.00
Model
No.
600RE
612R*
712R*
712RE
812RE
Wheel
Size
6" x 3/4" x 1/2"
6" x 3/4" x 1/2"
7" x 1" x 5/8"
7" x 1" x 5/8"
8" x 1" x 3/4"
Horse
Power
1/3
1/3
1/2
1/2
3/4
Voltage
Phase
115
115
115/230
115/230
115/230
Shipping
Weight
30 lbs.
29 lbs.
46 lbs.
70 lbs.
99 lbs.
Price
Each
$279.95
318.00
469.95
555.00
925.00
INDUSTRIAL GRINDERS
•
Adjustable stamp steel tool rest, spark
breaks and eye shields.
•
Grinder supplied with one coarse (36)
grit and one medium (60) grit
aluminum oxide grinding wheel.
•
Wheel and wire wheel brush (.014
wire).
•
Base mounted on/off switch and rubber
feet to minimize vibration.
•
Includes 8 ft. 3-conductor power cord.
*Other Grits Available (Inquire)
•
Built for heavy duty grinding, powered
by 1/3 HP Baldor split-phase motor.
•
Slim design provides extra clearance for
grinding odd shaped pieces.
•
Gated
exhaust
type
guards
accommodate a standard 3" wet/dry
vacuum hose, on models 600RE, 712R
and 812RE.
* 612R & 712R have Non-exhaust type
wheel guards.
Model
505-212
505-336
Grit
120
150
Grade
Medium
Fine
Price
$95.00
95.00
PEDESTALS
Grey
GA-14
Grey
GA-16
Grey
GA-16E
Grey
GA-20
Model
No.
7306D
7307D
7312D*
8107WD
8102WD
1022WD
1021WD
1215W
1216W
1406W
1411W
Wheel
Size
7" x 1" x 5/8"
7" x 1" x 5/8"
7" x 1" x 5/8" 1800/3600 1/2/1/3
8" x 1" x 3/4"
8" x 1" x 3/4"
10" x 1" x 7/8"
10" x 1" x 7/8"
12" x 2" x 1-1/4"
12" x 2" x 1-1/4"
14" x 3" x 1-1/4"
14" x 3" x 1-1/4"
Speed
R.P.M.
1800
3600
3600
1800
1800
1800
1800
1800
1800
1800
Motor
H.P.
1/2
1/2
3/4
3/4
1
1-1/2
2
3
5
7-1/2
Voltage
& Phase
115/230/1Ph
115/230/1Ph
115/1Ph
115/230/1Ph 111 lbs.
208-230/460 111 lbs.
115/230/1Ph 145 lbs.
208-230/460 146 lbs.
208-230/460 253 lbs.
208-230/460 254 lbs.
230/3Ph
460/3Ph
Shipping
Weight
84 lbs.
83 lbs.
90 lbs.
359 lbs.
460 lbs.
Price
Each
$ 740.00
740.00
930.00
1050.00
1040.00
1350.00
1330.00
2650.00
2750.00
3400.00
3700.00
DELUXE INDUSTRIAL GRINDERS EXHAUST TYPE
•
Built for heavy duty grinding, powered
by Baldor single or three-phase motor.
•
Adjustable cast iron tool rest, stamp steel
spark breaks and eyeshields.
•
Grinder supplied with one coarse (36)
grit and one medium (60) grit aluminum
oxide grinding wheel.
•
Supplied with water pot, tool tray and
two lighted eyeshields.
•
Base mounted on/off switch and rubber
feet to minimize vibration.
•
Saw head moves laterally
making it possible to get
extremely close to the vise
holding the workpiece when
making the cut affording a
vibration-free and burr-free
cut.
•
Ergonomically correct grip
with integrated switch and
saw head release mechanism.
•
Continually adjustable (may
be tightened in any position)
round table made of pressure-
cast aluminum swivels 45º in
both directions with positive
stops at 15º intervals.
•
Integrated
tightening
mechanism with self-
centering clamps. V-groove
for round pieces. Front side
groove for clamping thin
work pieces.
3600 R.P.M.'s
*7312D is a two speed
motor rated 1/2 H.P.
@3600 & 1/3 H.P.
@ 1800 RPM's
Red
GA-16R
Red
GA-16ER
Red
GA-20R
Red
GA-14R
Model
GA-16
GA-16E
GA-20
GA-20E
GA-14
Description
Cast Iron Pedestal, 32-7/8" High for 6", 7", 8", 10" Grinders/Buffers
Steel Pedestal
Cast Iron Pedestal, 30" High for 12" & 14" Grinders/Buffers
Steel Pedestal, 30" High for 12" & 14" Grinder/Buffers
Fabricated Steel Pedestal, 34-1/2" High for 6", 7", 8", 10" Grinders/Buffers
Price
$450.00
285.00
725.00
325.00
330.00
Steel
GA-20E
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 370
PRECISION 3" CUT-OFF SAW
•
Easy to setup and operate. Cuts a wide range of materials.
•
•
Uses safe, inexpensive cutting wheels. Makes precision cuts.
•
•
Thin, high-speed wheel leaves minimal burr.
Features:
•
High speed spindle with sealed ball bearings. Rubberized deburring wheel
•
•
Industrial quality timing belt. Industrial grade on-off switch.
•
•
.035 x 3" dia. fully reinforced cut-off wheels. 10,000 RPM 1/5 HP motor.
•
•
Precision machine tool quality vise with reversible jaw attachments.
Note: The cutting wheels listed above have been selected and developed
specifically for the Coastel 3" saw. They are balanced wheels, and are
formulated for optimum cutting and life. We recommend only these parts for
replacements.
Abrasive Cut-Off Wheels. Reinforced 3" x.035"- .040" x 1/4" Hole
Silicon Carbide
Wheels, 60 & 100 Grit
6" CARBIDE TOOL GRINDER
•
Standard equipment includes large tool table
for each wheel, machine tool lamp, protractor
type tool rest and coolant pot with spout.
•
Equipped with a locked, double row bearing, for use with diamond wheels.
•
Wheel flanges are guaranteed not to exceed .002 T.I.R. at the periphery.
•
Powered with a 1/2 horsepower heavy duty reversible motor.
1/2 H.P. 3600 Idle RPM's
$1395.00
PLATED DIAMOND
6"GRINDING WHEELS
6" DIAMOND WHEEL TOOL GRINDER
MODEL No. 522
Reg. List $1653.00
Less Wheels
$1550.00
1/2 H.P. 115V
MODEL No.
500-002
Reg. List
$1470.00
For fast carbide removal or fine finish very
cool cutting without corner breakdown.
• 6" diameter• 1-1/4" hole. • 3/4" thick.
• 100% concentration plated wheels.
Less Wheels
$45.00 Each
MODEL No.
CTS-300-1
Complete
11 lbs. 115 Volts
$495.00
Cut Off Saw
with Mitre Vise
MODEL No. CTS-300-M
$495.00
MINI MITER 3" CHOP SAW
$295.00
MODEL No.
37-160
With Carbide
Tipped Wheel
No. 28-729
Resin-bond cut-off wheel
3-1/8" x 1/32" x 3/8"
$4.95 Each
No. 28-732
Carbide tipped saw blade
3-1/8" x 1/16" x 3/8"
$45.00
4000 RPM's
200 Watt
Motor
Model
ACO-301
CCO-302
FCO-303
EXL-201
CSO-501
Best Suited For Cutting
Stainless Steel, Nickel alloys, Mild Steel
Aluminum, Copper, Brass
Tool Steel, Hardened Steel, Alloys
Unitized Deburr Wheel, 1-1/2" x 1/4" x 1/8"
Combination cut off wheel & Deburr kit
(2 each of the above)
Price
$ 4.95
4.95
4.95
6.50
35.00
Model
No.
600RE
612R*
712R*
712RE
812RE
Wheel
Size
6" x 3/4" x 1/2"
6" x 3/4" x 1/2"
7" x 1" x 5/8"
7" x 1" x 5/8"
8" x 1" x 3/4"
Horse
Power
1/3
1/3
1/2
1/2
3/4
Voltage
Phase
115
115
115/230
115/230
115/230
Shipping
Weight
30 lbs.
29 lbs.
46 lbs.
70 lbs.
99 lbs.
Price
Each
$279.95
318.00
469.95
555.00
925.00
INDUSTRIAL GRINDERS
•
Adjustable stamp steel tool rest, spark
breaks and eye shields.
•
Grinder supplied with one coarse (36)
grit and one medium (60) grit
aluminum oxide grinding wheel.
•
Wheel and wire wheel brush (.014
wire).
•
Base mounted on/off switch and rubber
feet to minimize vibration.
•
Includes 8 ft. 3-conductor power cord.
*Other Grits Available (Inquire)
•
Built for heavy duty grinding, powered
by 1/3 HP Baldor split-phase motor.
•
Slim design provides extra clearance for
grinding odd shaped pieces.
•
Gated
exhaust
type
guards
accommodate a standard 3" wet/dry
vacuum hose, on models 600RE, 712R
and 812RE.
* 612R & 712R have Non-exhaust type
wheel guards.
Model
505-212
505-336
Grit
120
150
Grade
Medium
Fine
Price
$95.00
95.00
PEDESTALS
Grey
GA-14
Grey
GA-16
Grey
GA-16E
Grey
GA-20
Model
No.
7306D
7307D
7312D*
8107WD
8102WD
1022WD
1021WD
1215W
1216W
1406W
1411W
Wheel
Size
7" x 1" x 5/8"
7" x 1" x 5/8"
7" x 1" x 5/8" 1800/3600 1/2/1/3
8" x 1" x 3/4"
8" x 1" x 3/4"
10" x 1" x 7/8"
10" x 1" x 7/8"
12" x 2" x 1-1/4"
12" x 2" x 1-1/4"
14" x 3" x 1-1/4"
14" x 3" x 1-1/4"
Speed
R.P.M.
1800
3600
3600
1800
1800
1800
1800
1800
1800
1800
Motor
H.P.
1/2
1/2
3/4
3/4
1
1-1/2
2
3
5
7-1/2
Voltage
& Phase
115/230/1Ph
115/230/1Ph
115/1Ph
115/230/1Ph 111 lbs.
208-230/460 111 lbs.
115/230/1Ph 145 lbs.
208-230/460 146 lbs.
208-230/460 253 lbs.
208-230/460 254 lbs.
230/3Ph
460/3Ph
Shipping
Weight
84 lbs.
83 lbs.
90 lbs.
359 lbs.
460 lbs.
Price
Each
$ 740.00
740.00
930.00
1050.00
1040.00
1350.00
1330.00
2650.00
2750.00
3400.00
3700.00
DELUXE INDUSTRIAL GRINDERS EXHAUST TYPE
•
Built for heavy duty grinding, powered
by Baldor single or three-phase motor.
•
Adjustable cast iron tool rest, stamp steel
spark breaks and eyeshields.
•
Grinder supplied with one coarse (36)
grit and one medium (60) grit aluminum
oxide grinding wheel.
•
Supplied with water pot, tool tray and
two lighted eyeshields.
•
Base mounted on/off switch and rubber
feet to minimize vibration.
•
Saw head moves laterally
making it possible to get
extremely close to the vise
holding the workpiece when
making the cut affording a
vibration-free and burr-free
cut.
•
Ergonomically correct grip
with integrated switch and
saw head release mechanism.
•
Continually adjustable (may
be tightened in any position)
round table made of pressure-
cast aluminum swivels 45º in
both directions with positive
stops at 15º intervals.
•
Integrated
tightening
mechanism with self-
centering clamps. V-groove
for round pieces. Front side
groove for clamping thin
work pieces.
3600 R.P.M.'s
*7312D is a two speed
motor rated 1/2 H.P.
@3600 & 1/3 H.P.
@ 1800 RPM's
Red
GA-16R
Red
GA-16ER
Red
GA-20R
Red
GA-14R
Model
GA-16
GA-16E
GA-20
GA-20E
GA-14
Description
Cast Iron Pedestal, 32-7/8" High for 6", 7", 8", 10" Grinders/Buffers
Steel Pedestal
Cast Iron Pedestal, 30" High for 12" & 14" Grinders/Buffers
Steel Pedestal, 30" High for 12" & 14" Grinder/Buffers
Fabricated Steel Pedestal, 34-1/2" High for 6", 7", 8", 10" Grinders/Buffers
Price
$450.00
285.00
725.00
325.00
330.00
Steel
GA-20E
