Page 55 Penn Tool Co. Precision Tooling 2014 Sale Catalog
P. 55
ERICK MAGNA HOLDER
•
Here is a rugged holder for Indicators
for use as lathe stops, etc.
•
Assures fast accurate work in facing,
boring, turning, etc.
•
Widely used on machines where
graduations are hard to read.
•
Large 1/4" lug back type Indicators
mount in specially designed
extension links which provide great
flexibility.
•
To accommodate small test
Indicators mount the 6" long, 1/4"
diameter stainless steel attachment
in a 360º swivel block.
•
Unit has precision lateral adjustment
controlled by large thumb screw
located at rear of unit with 1/2" travel-
highly important for "zeroing in"
Indicator.
•
All components of this unit are
chrome, aluminum, stainless steel and
black oxide.
•
Base has powerful magnetic pull with
magnetic release.
ERICK MAGNA HOLDER
Magnetic Indicator Holder for Every Type of Dial Indicator
•
Lug back Indicators (not furnished)
are mounted directly on unit with bolt
and nut provided to give powerful
compact unit.
•
Base has powerful lifetime guaranteed
magnetic grip which assures you of
accurate work.
MODEL No.
EMH-300
$29.95
Less Indicator
Base Size
3-1/2" x 1/8" x 1"
90 lbs. Pull
Neo Mag Base
MODEL No.
350-N
$69.95
50 lbs. Pull
Alnico Mag Base
MODEL No.
350-A
$54.95
ERICK MAGNA HOLDER
Designed for use with Small Test Indicators
•
Unit has fine precision adjustment similar to
surface gauge controlled by thumb screw
allowing the most minute adjustment of Indicator
without touching work or Indicator.
•
Base has powerful magnetic grip and will adhere
firmly to round or flat surfaces with magnetic
release.
•
1/4" stainless steel non-magnetic holding rod is
6" long, set in hardened ball socket setting
which allows universal positioning of indicator.
•
Base finish is hammered blue. All other parts are
plated or are of stainless steel.
50 lbs. Pull
MODEL No.
200-BS
$46.95
90 lbs. Pull
MODEL No.
200-BN
$54.95
BesTest INDICATOR
W/FREE MAGNETIC BASE
Swiss
Made
•
Easy-to-read "jet console" face w/high
visibility orange hand.
•
Constant clockwise rotation.
•
Automatic reversal.
•
Swiveling point.
•
Carbide tip point.
•
Universal mounting.
•
Monoblock (Precision Watch)
body design.
•
Anti-magnetic and corrosion resistant.
BesTest Indicator set comes com-
plete with one carbide tip contact
point, .080" diameter; one 1/2" long
x .250" diameter extension with
dovetail; one contact point wrench;
one durable molded case and cer-
tificate of accuracy; traceability and
magnetic base.
SET No.
599-7030-P
Reg. List $175.00
$149.95
Mag Base
130 lbs. pull
With Fine Adjustment
.0005" Grad.
.030" Range
0-15-0
1" Dial Face
Z-HEIGHT HEAVY DUTY
COMPARATOR STAND
Precision Rack and Pinion Vertical Column for Mounting and
Positioning both Plunger and Lever Type Dial Gages
•
Measuring base: Hardened & Precision
Ground special tool steel with serrations.
•
Base size: 5" x 5" (125mm x 125mm)
•
Dial Gage Holder: 3/8" dia. with 8mm
bushing adapter.
•
Vertical Range: 5.1" (130mm)
•
Throat Depth: 4.7" (120mm)
•
Net weight: 12kgs.
MODEL No.
19284
$339.95
Less Indicator
SPECIAL APPLICATION
COMPARATOR STAND
Useful for checking Radial & Axial Run Out
on Cylindrical Shafts
•
Measuring Base: Precision ground,
stable cast iron bed.
•
Size: 16"/400mm long
•
Tee slot adjustment of centers.
•
Flatness of bed: .0005"/.010mm
•
Axiality of centers: .0005"/.010mm
•
Maximum distance between centers:
8.65"/220mm
•
Center height: 4"/100mm
•
Dial indicator not included
•
Net weight: 22kgs
MODEL No.
19285
$550.00
Less Indicator
•
Cleverly designed central tightening
system. Three joints can be fixed and
moved in five different directions with
a single touch. The Purely mechanical
and infinitely adjustable central
tightening system with the quick lock
offers the greatest possible ease of
operation.
•
Secure, stable bases. A safe stable
base provides the essential
foundation
for
precise
measurements. The articulated arms
can be mounted as desired, on a
strong magnet, vacuum or a granite
sliding base.
3D ARTICULATING ARMS
WITH MAGNETIC OR VACUUM BASES
No. 18416
No. 14840-1
No. 18415
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 55
Model
No.
14840-1
14845-1
14848
18416
18415
14828
Arm Radius
of Movement
5.15"/130mm
8"/200mm
8"/200mm
11"/280mm
11"/280mm
11"/280mm
Magnetic
Base Size
34 x 30 x 35mm
60 x 50 x 55mm
Vacuum 88mm
60 x 50 x 55mm
Vacuum 88mm
75 x 50 x 55mm
Approximate
Holding Power
67 lbs.
168 lbs.
-
168 lbs.
-
202 lbs.
Price
Each
$215.00
235.00
265.00
310.00
355.00
375.00
INDICATOR
AND MAGNETIC BASE
Dial Test Indicator:
Series No. 312B-1
.0005" Graduation
0-15-0 Dial
.060" Range
1-1/2" Dial Face
SET No.
312B-150
Reg. $295.00
$224.95
Magnetic Base
•
Fine adjustment.
•
5/32" scriber opening.
•
2-3/8" x 1-3/4" base.
•
9" height.
•
100 lbs. magnet pull,
On/Off switch.
•
Quality import.
Buy Both
•
Here is a rugged holder for Indicators
for use as lathe stops, etc.
•
Assures fast accurate work in facing,
boring, turning, etc.
•
Widely used on machines where
graduations are hard to read.
•
Large 1/4" lug back type Indicators
mount in specially designed
extension links which provide great
flexibility.
•
To accommodate small test
Indicators mount the 6" long, 1/4"
diameter stainless steel attachment
in a 360º swivel block.
•
Unit has precision lateral adjustment
controlled by large thumb screw
located at rear of unit with 1/2" travel-
highly important for "zeroing in"
Indicator.
•
All components of this unit are
chrome, aluminum, stainless steel and
black oxide.
•
Base has powerful magnetic pull with
magnetic release.
ERICK MAGNA HOLDER
Magnetic Indicator Holder for Every Type of Dial Indicator
•
Lug back Indicators (not furnished)
are mounted directly on unit with bolt
and nut provided to give powerful
compact unit.
•
Base has powerful lifetime guaranteed
magnetic grip which assures you of
accurate work.
MODEL No.
EMH-300
$29.95
Less Indicator
Base Size
3-1/2" x 1/8" x 1"
90 lbs. Pull
Neo Mag Base
MODEL No.
350-N
$69.95
50 lbs. Pull
Alnico Mag Base
MODEL No.
350-A
$54.95
ERICK MAGNA HOLDER
Designed for use with Small Test Indicators
•
Unit has fine precision adjustment similar to
surface gauge controlled by thumb screw
allowing the most minute adjustment of Indicator
without touching work or Indicator.
•
Base has powerful magnetic grip and will adhere
firmly to round or flat surfaces with magnetic
release.
•
1/4" stainless steel non-magnetic holding rod is
6" long, set in hardened ball socket setting
which allows universal positioning of indicator.
•
Base finish is hammered blue. All other parts are
plated or are of stainless steel.
50 lbs. Pull
MODEL No.
200-BS
$46.95
90 lbs. Pull
MODEL No.
200-BN
$54.95
BesTest INDICATOR
W/FREE MAGNETIC BASE
Swiss
Made
•
Easy-to-read "jet console" face w/high
visibility orange hand.
•
Constant clockwise rotation.
•
Automatic reversal.
•
Swiveling point.
•
Carbide tip point.
•
Universal mounting.
•
Monoblock (Precision Watch)
body design.
•
Anti-magnetic and corrosion resistant.
BesTest Indicator set comes com-
plete with one carbide tip contact
point, .080" diameter; one 1/2" long
x .250" diameter extension with
dovetail; one contact point wrench;
one durable molded case and cer-
tificate of accuracy; traceability and
magnetic base.
SET No.
599-7030-P
Reg. List $175.00
$149.95
Mag Base
130 lbs. pull
With Fine Adjustment
.0005" Grad.
.030" Range
0-15-0
1" Dial Face
Z-HEIGHT HEAVY DUTY
COMPARATOR STAND
Precision Rack and Pinion Vertical Column for Mounting and
Positioning both Plunger and Lever Type Dial Gages
•
Measuring base: Hardened & Precision
Ground special tool steel with serrations.
•
Base size: 5" x 5" (125mm x 125mm)
•
Dial Gage Holder: 3/8" dia. with 8mm
bushing adapter.
•
Vertical Range: 5.1" (130mm)
•
Throat Depth: 4.7" (120mm)
•
Net weight: 12kgs.
MODEL No.
19284
$339.95
Less Indicator
SPECIAL APPLICATION
COMPARATOR STAND
Useful for checking Radial & Axial Run Out
on Cylindrical Shafts
•
Measuring Base: Precision ground,
stable cast iron bed.
•
Size: 16"/400mm long
•
Tee slot adjustment of centers.
•
Flatness of bed: .0005"/.010mm
•
Axiality of centers: .0005"/.010mm
•
Maximum distance between centers:
8.65"/220mm
•
Center height: 4"/100mm
•
Dial indicator not included
•
Net weight: 22kgs
MODEL No.
19285
$550.00
Less Indicator
•
Cleverly designed central tightening
system. Three joints can be fixed and
moved in five different directions with
a single touch. The Purely mechanical
and infinitely adjustable central
tightening system with the quick lock
offers the greatest possible ease of
operation.
•
Secure, stable bases. A safe stable
base provides the essential
foundation
for
precise
measurements. The articulated arms
can be mounted as desired, on a
strong magnet, vacuum or a granite
sliding base.
3D ARTICULATING ARMS
WITH MAGNETIC OR VACUUM BASES
No. 18416
No. 14840-1
No. 18415
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 55
Model
No.
14840-1
14845-1
14848
18416
18415
14828
Arm Radius
of Movement
5.15"/130mm
8"/200mm
8"/200mm
11"/280mm
11"/280mm
11"/280mm
Magnetic
Base Size
34 x 30 x 35mm
60 x 50 x 55mm
Vacuum 88mm
60 x 50 x 55mm
Vacuum 88mm
75 x 50 x 55mm
Approximate
Holding Power
67 lbs.
168 lbs.
-
168 lbs.
-
202 lbs.
Price
Each
$215.00
235.00
265.00
310.00
355.00
375.00
INDICATOR
AND MAGNETIC BASE
Dial Test Indicator:
Series No. 312B-1
.0005" Graduation
0-15-0 Dial
.060" Range
1-1/2" Dial Face
SET No.
312B-150
Reg. $295.00
$224.95
Magnetic Base
•
Fine adjustment.
•
5/32" scriber opening.
•
2-3/8" x 1-3/4" base.
•
9" height.
•
100 lbs. magnet pull,
On/Off switch.
•
Quality import.
Buy Both
