Page 59 Penn Tool Co. Precision Tooling 2014 Sale Catalog
P. 59
MICROMETER ANVIL
ATTACHMENTS
7 DIFFERENT SHAPES
•
Fits all micrometers with spindle
diameters of .235", .250", .256" and
.270"
•
Each anvil attachment is held with its
own reinforced neoprene boot.
•
Measures hard to reach places and
odd workpieces. (shoulders, webs,
angles, slots, grooves, etc.)
•
Ball attachment .200" diameter chrome
alloy steel.
•
Attractive plastic case.
•
Supplied with simple to use
instructions.
•
All parts hardened and ground. Finest
quality. Made in U.S.A.
INDICATOR CLAMP
Fits All Indicators
•
Clamps all standard dovetails.
•
Clamps all dia. from 1/8" to 1/4"
"TOM THUMB"
FLEXIBLE
INDICATOR HOLDER
With Fine Adjust. Mag. Base
Flexible locks simply by turning a knob.
The universal flexible arm becomes ex-
tremely rigid in the exact location which
you position it. Can support 4lb. load when
tightened fully.
•
Magnet (cylindrical) 1-3/8" dia. x 1-1/8"
high, 25 lbs. pull.
•
5" bottom of base to top of post.
•
Post diameter 5/16".
•
Diameter of joined column 5/16".
•
Total height base to top: adjustable from
8" to 12".
•
Fine adjustor located at base for remote
control.
•
Top clamp: clamps anything up to 1/4"
and swivels 360˚.
"TOM THUMB"
FLEXIBLE
CABLE ARM 6" OR 9"
•
Accommodates mounting rods up to
1/4" diameter.
•
Turn 1-1/4" diameter circle and locks
securely to let you reach "impossible"
areas.
•
Mounting clamp fits 5/16" posts.
MinIndicol UNIVERSAL
INDICATOR HOLDER
•
A simplified version of the popular
Indicol.
•
Two holders in one! Its parts allow it
to be assembled also as a cylinder
holder.
•
Three point adjustment.
•
Reach from 0 to 12" diameter.
DOUBLE-JOINTED
INDICATOR HOLDER
•
3-link rod 3/8" diameter, precision
made, heat treated and black oxided.
•
The joints are precision pivots with
adjustable friction.
•
Provides dovetail grip as well as firm
holding of 5/32" stem indicators
•
Upper link has 1/4-28 tapped hole to
receive the supplied 2-1/4" extension
for extra deep and extra wide reach.
•
With Double Jointed Holder the test
indicator can be moved out of the
way without losing the centerline of
the set-up.
MODEL
DJH-100
MODEL
TTF-009 Indicator
Less
MODEL
ICL-008
INDICATOR HOLDERS
For Dovetail & 5/32" Stem
CYLINDER HOLDER
RECTANGULAR HOLDER
HALF ROUND COMBINATION
HOLDER
MODEL
HRC-004
MODEL
RHH-003
1/4" x 1/2" Shank for
Dovetail & 5/32" Stem
2 Point
Adjustment
NOGAFLEX
HOLDER
•
Most useful for centering holes on
milling machines.
•
Test indicator holder arm with 8mm
diameter x 40mm long stem.
MODEL No.
FH-1018
Reg. $56.95
$49.95
$63.50
$9.95
MODEL
MUH-400
$59.95
$89.50
$39.95
$43.50
6" Cable
Length
Use Your Own Mag Base
Super Spline
Spline
Blade
Disc
Knife
Comparator
CENTER MASTER
HEIGHT GAGE ATTACHMENT
•
Locates the hole center as its head is
inserted in a hole.
•
The distance between two hole centers
can be measured with this attachment.
•
Largest measurable hole diameter is
approximately 1-1/2"
•
The stem dimension is 1/4" x 1/2".
•
Chrome plated body and triangle,
movable hole center.
$139.50
MODEL No.
900581
List $155.00
Ball
.200"
Precise
MAGNETIC BASE
PUSH BUTTON ON-OFF
•
Easy on-off push button.
•
Four ground surfaces to grip
including V-slot for round surfaces.
•
3/8" x 9" center post with 1/4" x 7" cross
and indicator clamp.
$19.95
Mag. Base
Only
MODEL No.
PMB-670
$44.95
Mag. Base
and .0005"
Grad. Indicator
SET No.
COM-001
KAFER MULTI
MAG BASE
•
For quick set-ups on machines.
•
2-1/4" permanent magnet surface
includes 120º "V" holder with1/4" depth.
•
Swivel mount adjustable horizontally
and vertically with 360º rotation.
•
2-3/4"L x 1-3/8"W x 2-3/8" H
•
D.O.T. regulated. Shipped via ground
freight only. No UPS cosignee or collect
shipments.
MODEL
20-756-3
Less
Indicator
$135.25
Made In
Germany
MIGHTY-MAG
•
45 lbs. of holding power.
•
Zinc die-cast housing.
•
Size: 4-1/2" x 1" x 1-1/4"
•
5 locations for mounting accessories:
-3 positions 1/4-20 for lug mounts.
-1 tapped hole 10-32.
-1 reamed hole 3/8"
China
Mighty-Mag
MODEL No.
IMM-972
$4.95
USA
Mighty-Mag
MODEL No.
MM-279
$12.95
Cable
Locking
Knob
INDICATOR PIN VISE
•
Allows any A.G.D. dial indicator to
hold any diameter probe, needle, etc.
0 to .040" capacity.
•
Uses standard 4-48 thread for easy
mounting to indicator spindle.
$24.95
MODEL No.
18560
Has
4-48
Thread
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 59
1/4" Shank, for
Dovetail & 5/32"
Stem
Model
MAA-001
MAA-002
MAA-003
MAA-004
MAA-005
MAA-006
MAA-007
MAA-700
Description
.500" Dia. Disc
.100" Spline
.050" Spline
.200" Ball
.303" Blade
.020" x 30º Knife
.030" x 30º Point
Kit contains one
each of above
Price
$11.95
11.95
11.95
3.00
11.95
11.95
11.95
$39.95
Model
CHH-001
CHH-002
Shank
1/4"
3/16"
Price
$33.50
33.50
Model
TTF-050
TTF-052
Description
6 Inches
9 Inches
Price
$42.00
48.00
ATTACHMENTS
7 DIFFERENT SHAPES
•
Fits all micrometers with spindle
diameters of .235", .250", .256" and
.270"
•
Each anvil attachment is held with its
own reinforced neoprene boot.
•
Measures hard to reach places and
odd workpieces. (shoulders, webs,
angles, slots, grooves, etc.)
•
Ball attachment .200" diameter chrome
alloy steel.
•
Attractive plastic case.
•
Supplied with simple to use
instructions.
•
All parts hardened and ground. Finest
quality. Made in U.S.A.
INDICATOR CLAMP
Fits All Indicators
•
Clamps all standard dovetails.
•
Clamps all dia. from 1/8" to 1/4"
"TOM THUMB"
FLEXIBLE
INDICATOR HOLDER
With Fine Adjust. Mag. Base
Flexible locks simply by turning a knob.
The universal flexible arm becomes ex-
tremely rigid in the exact location which
you position it. Can support 4lb. load when
tightened fully.
•
Magnet (cylindrical) 1-3/8" dia. x 1-1/8"
high, 25 lbs. pull.
•
5" bottom of base to top of post.
•
Post diameter 5/16".
•
Diameter of joined column 5/16".
•
Total height base to top: adjustable from
8" to 12".
•
Fine adjustor located at base for remote
control.
•
Top clamp: clamps anything up to 1/4"
and swivels 360˚.
"TOM THUMB"
FLEXIBLE
CABLE ARM 6" OR 9"
•
Accommodates mounting rods up to
1/4" diameter.
•
Turn 1-1/4" diameter circle and locks
securely to let you reach "impossible"
areas.
•
Mounting clamp fits 5/16" posts.
MinIndicol UNIVERSAL
INDICATOR HOLDER
•
A simplified version of the popular
Indicol.
•
Two holders in one! Its parts allow it
to be assembled also as a cylinder
holder.
•
Three point adjustment.
•
Reach from 0 to 12" diameter.
DOUBLE-JOINTED
INDICATOR HOLDER
•
3-link rod 3/8" diameter, precision
made, heat treated and black oxided.
•
The joints are precision pivots with
adjustable friction.
•
Provides dovetail grip as well as firm
holding of 5/32" stem indicators
•
Upper link has 1/4-28 tapped hole to
receive the supplied 2-1/4" extension
for extra deep and extra wide reach.
•
With Double Jointed Holder the test
indicator can be moved out of the
way without losing the centerline of
the set-up.
MODEL
DJH-100
MODEL
TTF-009 Indicator
Less
MODEL
ICL-008
INDICATOR HOLDERS
For Dovetail & 5/32" Stem
CYLINDER HOLDER
RECTANGULAR HOLDER
HALF ROUND COMBINATION
HOLDER
MODEL
HRC-004
MODEL
RHH-003
1/4" x 1/2" Shank for
Dovetail & 5/32" Stem
2 Point
Adjustment
NOGAFLEX
HOLDER
•
Most useful for centering holes on
milling machines.
•
Test indicator holder arm with 8mm
diameter x 40mm long stem.
MODEL No.
FH-1018
Reg. $56.95
$49.95
$63.50
$9.95
MODEL
MUH-400
$59.95
$89.50
$39.95
$43.50
6" Cable
Length
Use Your Own Mag Base
Super Spline
Spline
Blade
Disc
Knife
Comparator
CENTER MASTER
HEIGHT GAGE ATTACHMENT
•
Locates the hole center as its head is
inserted in a hole.
•
The distance between two hole centers
can be measured with this attachment.
•
Largest measurable hole diameter is
approximately 1-1/2"
•
The stem dimension is 1/4" x 1/2".
•
Chrome plated body and triangle,
movable hole center.
$139.50
MODEL No.
900581
List $155.00
Ball
.200"
Precise
MAGNETIC BASE
PUSH BUTTON ON-OFF
•
Easy on-off push button.
•
Four ground surfaces to grip
including V-slot for round surfaces.
•
3/8" x 9" center post with 1/4" x 7" cross
and indicator clamp.
$19.95
Mag. Base
Only
MODEL No.
PMB-670
$44.95
Mag. Base
and .0005"
Grad. Indicator
SET No.
COM-001
KAFER MULTI
MAG BASE
•
For quick set-ups on machines.
•
2-1/4" permanent magnet surface
includes 120º "V" holder with1/4" depth.
•
Swivel mount adjustable horizontally
and vertically with 360º rotation.
•
2-3/4"L x 1-3/8"W x 2-3/8" H
•
D.O.T. regulated. Shipped via ground
freight only. No UPS cosignee or collect
shipments.
MODEL
20-756-3
Less
Indicator
$135.25
Made In
Germany
MIGHTY-MAG
•
45 lbs. of holding power.
•
Zinc die-cast housing.
•
Size: 4-1/2" x 1" x 1-1/4"
•
5 locations for mounting accessories:
-3 positions 1/4-20 for lug mounts.
-1 tapped hole 10-32.
-1 reamed hole 3/8"
China
Mighty-Mag
MODEL No.
IMM-972
$4.95
USA
Mighty-Mag
MODEL No.
MM-279
$12.95
Cable
Locking
Knob
INDICATOR PIN VISE
•
Allows any A.G.D. dial indicator to
hold any diameter probe, needle, etc.
0 to .040" capacity.
•
Uses standard 4-48 thread for easy
mounting to indicator spindle.
$24.95
MODEL No.
18560
Has
4-48
Thread
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 59
1/4" Shank, for
Dovetail & 5/32"
Stem
Model
MAA-001
MAA-002
MAA-003
MAA-004
MAA-005
MAA-006
MAA-007
MAA-700
Description
.500" Dia. Disc
.100" Spline
.050" Spline
.200" Ball
.303" Blade
.020" x 30º Knife
.030" x 30º Point
Kit contains one
each of above
Price
$11.95
11.95
11.95
3.00
11.95
11.95
11.95
$39.95
Model
CHH-001
CHH-002
Shank
1/4"
3/16"
Price
$33.50
33.50
Model
TTF-050
TTF-052
Description
6 Inches
9 Inches
Price
$42.00
48.00
