Page 88 Penn Tool Co. Precision Tooling 2014 Sale Catalog
P. 88
ULTRASONIC THICKNESS GAUGE
•
This handheld unit has precise touch and
read capabilities yet is economically
priced.
•
The UTG-1500 is designed to measure
the thickness of metallic and non-metallic
materials such as aluminum, titanium,
plastics, ceramics, glass and any other
good ultrasonic wave conductor as long
as it has parallel top and bottom surfaces.
•
The UTG-1500 will accurately display
readings in either inch or millimeter after
a simple calibration to a known thickness
or sound velocity.
Specifications
:
Display type . . . . . . . . . . . . . . . . . . . . . . 3-digit LCD
Resolution . . . . . . . . . . . . . . . . . . . . . 0.001"/0.01mm
Measuring Range . . . . . . . . . . . . . . . . . . . 0.04" to 8.0"
Sound velocity range: 3280-32805 ft/s (1000-9999m/s)
Operating temperature . . . . . . . . . . 32-122 degrees F
Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5MHz
Update range . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Hz
Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A
Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A
Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A
Power supply . . . AA alkaline batteries (4pc supplied)
Battery life . . . . . . . . . . . . . . . . Approx. 250 hour/set
Power consumption . . Working current is less than 3V
Dimensions . . . . . 4.9"x 2.6"x 0.9" (161 x 69 x 32mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.7Lbs (300g)
Complete with
Certificate of
Calibration,
Couplant Gel, AA
Batteries, Operation
Manual and Custom
Carry Case
MODEL No.
UTG-1500
$565.00
COATING THICKNESS GAUGES
The PHASE ll PTG-3500 series of gages can perform two different methods of
calculating thickness measurement by utilizing the characteristics of both
eddy current and magnetic induction. Testing performance is both non-
destructive and extremely accurate.
The
PTG-3500
utilizes an
integrated probe that can
automatically detect a fer-
rous or non-ferrous sub-
strate and comes with 2
substrate samples (steel,
aluminum), 4 calibrated
thickness samples, carry
case, batteries and opera-
tion manual.
Specifications:
Measuring range:
0-2000mm max. or 0-80mils
Resolution:
0.1mm/0.01 mils (0-99mm)
or 1mm (ver 100mm)
Guaranteed tolerance:
After one-point calibration:
±1-3% or 2mm (whichever is greater)
Display:
4 digits (digit height + 10mm/0.4")
Minimum measuring area:
0.2"x 0.2" (5mm x 5mm)
Minimum radius of curvature:
Convex: 0.12: (3mm)
Concave: 1.2" (30mm)
Model No.
PTG-3500
$479.95
(Not Shown)
ULTRASONIC THICKNESS GAGE
With Thru Coating Capabilities
•
State of the art, digital tester is
capable of reading wall
thickness thru coatings and
point without affecting the
measurement and is packed
with the most popular features
including basic measurement,
Scanning
Capabilities,
Adjustable Sound Velocity,
extended memory and RS 232
output capabilities.
The
PTG-3550
comes com-
plete with 1 pc external auto-
detect ferrous/non-ferrous
probe, 2 substrate samples
(steel, aluminum), 4 cali-
brated thickness specimens,
carry case, batteries and op-
eration manual.
•
This dynamic sonic gauge is
designed to measure the
thickness of metallic and non-
metallic materials such as steel,
aluminum, titanium, plastics
ceramic, glass and any other
good ultrasonic wave conductor
as long as it has parallel top and
bottom surfaces.
Specifications:
Display type:
4-digit LCD w/back light
Min. display range:
0.003 (if>3.93", 0.0003"(if<3.93")
Measuring range:
Standard mode: 0.03-8.0"in steel
Thru coating mode: 0.118"-.905"
3.0-23mm w/standard probe
Accuracy:
±1%x H + 0.0007"
(H=displayed value)
Sound velocity range:
3280-32805ft/s (1000-9999m/s
Operating temperature:
32-122º
Frequency:
4MHz
Update range:
4Hz
Memory:
500 test values
Output:
RS 232
Power supply:
3V AA Alkaline batt. (2pc)
Battery life:
Approx. 100 Hours. (w/backlight off)
Power consumption:
Working current is less than 3V
Dimensions:
5.86"x 2.87"x 1.25" (149x 73 32mm)
Weight:
5.6 oz. (160g)
MODEL No.
UTG-2600
$1195.00
w/Certification
of Calibration
Minimum substrate thickness:
Ferrous 20 mils (0.5mm
Non-ferrous: 2 mils (50mm)
Calibration:
Zero calibration/Foil calibration
*Max. surface temp. of test object:
302ºF (contact time max is 2 sec.
Power source:
4-AAA batteries
Dimensions:
161 x 69 x 32mm
Weight:
9oz. (260g)
Model No.
PTG-3550
$479.95
(Shown)
DIGITAL VIBRATION TESTER
The multi-functional vibration meter will measure velocity, accelera-
tion, displacement and RPM. Full frequency ranges are utilized for
broad detection abilities.
•
Quick accurate analysis for
checking balance and alignment of
a rotating object.
•
Large LCD display.
•
RS232 output.
•
Inch/Metric conversion with the
push of a button.
•
Statistics: Mean, Max, Min No. of
measurements and Standard
deviation.
•
Max hold function.
•
Regulated output (AC output 2.0V
peak full scale.
Frequency range: 10Hz-1KHz
Frequency range: 10Hz-10KHz
Frequency range: 10Hz-1KHz
Frequency range: 10Hz-500KHz
MODEL No.
DVM-1000
$595.00
Specifications:
Acceleration: Peak value: 0.1-200 m/s or 0.3-656 ft/m/s
Velocity (RMS): RMS: 0.1-400 (mm/s) or 0.004-16.0 inch/s
Displacement: Peak to Peak 0.001 - 2.0(mm) or 0.04-80mil
RPM (revolution) . . . . . . . . . . . . . . . . . . . 5-100,000 r/min
Requency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.1-10KHz
Accuracy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <5%
Operating Temperature . . . . . . . . . . . . . . . . . . . . . 0-45ºC
Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-AAA batteries
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . 161 x 69 x 32mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300g
Includes
1 Powerful Magnet
1-Accelerator
1-Stinger Probe (cone)
1-Stinger Probe (ball)
1-Operation Manual
Carry Case
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 88
• The coating thickness gauge can perform two
different methods of calculating thickness
measurement by utilizing the characteristics of
both eddy current and magnetic induction.
• This sleek integrated coating thickness gauge is
capable of measuring coatings on Fe and NFe
metallic substrates and has a push button FLIP
screen for easy reading while testing upside down.
• With this state of the art thickness gauge, you can
easily detect the thickness of nonmagnetic coating
on a magnetic substrate (ferrous) or an insulating
coating on a non-magnetic conductive substrate
(non-ferrous) utilizing either an integrated probe or
our version that comes with 1 auto-detect external
probe.
• The PTG-4500 utilizes an integrated probe that can
automatically detect a Ferrous or Non-Ferrous
substrate and comes with 2 substrate samples (steel
aluminum),2-calibrated thickness samples, carry
case, battery and operations.
Measuring Range:
0-1000µm (0-40 mils)
Accuracy:
+/-2 µm +3%H (H=actual value)
+/-0.1mils +3%H (H=actual value)
Display:
3-Digits
Min Measuring Area:
0.2” x 0.2” (5mm x 5mm)
Min Substrate Thickness:
Fe: 20mils(0.5mm)
NFe: 2 mils (50mm)
COATING THICKNESS GAGE WITH FLIP DISPLAY
MODEL No.
PTG-4500
$475.00
5 Year
Warranty
Lifetime
Tech Support
Simplicity in Coating Thickness Measurement
•
This handheld unit has precise touch and
read capabilities yet is economically
priced.
•
The UTG-1500 is designed to measure
the thickness of metallic and non-metallic
materials such as aluminum, titanium,
plastics, ceramics, glass and any other
good ultrasonic wave conductor as long
as it has parallel top and bottom surfaces.
•
The UTG-1500 will accurately display
readings in either inch or millimeter after
a simple calibration to a known thickness
or sound velocity.
Specifications
:
Display type . . . . . . . . . . . . . . . . . . . . . . 3-digit LCD
Resolution . . . . . . . . . . . . . . . . . . . . . 0.001"/0.01mm
Measuring Range . . . . . . . . . . . . . . . . . . . 0.04" to 8.0"
Sound velocity range: 3280-32805 ft/s (1000-9999m/s)
Operating temperature . . . . . . . . . . 32-122 degrees F
Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5MHz
Update range . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Hz
Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A
Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A
Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A
Power supply . . . AA alkaline batteries (4pc supplied)
Battery life . . . . . . . . . . . . . . . . Approx. 250 hour/set
Power consumption . . Working current is less than 3V
Dimensions . . . . . 4.9"x 2.6"x 0.9" (161 x 69 x 32mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.7Lbs (300g)
Complete with
Certificate of
Calibration,
Couplant Gel, AA
Batteries, Operation
Manual and Custom
Carry Case
MODEL No.
UTG-1500
$565.00
COATING THICKNESS GAUGES
The PHASE ll PTG-3500 series of gages can perform two different methods of
calculating thickness measurement by utilizing the characteristics of both
eddy current and magnetic induction. Testing performance is both non-
destructive and extremely accurate.
The
PTG-3500
utilizes an
integrated probe that can
automatically detect a fer-
rous or non-ferrous sub-
strate and comes with 2
substrate samples (steel,
aluminum), 4 calibrated
thickness samples, carry
case, batteries and opera-
tion manual.
Specifications:
Measuring range:
0-2000mm max. or 0-80mils
Resolution:
0.1mm/0.01 mils (0-99mm)
or 1mm (ver 100mm)
Guaranteed tolerance:
After one-point calibration:
±1-3% or 2mm (whichever is greater)
Display:
4 digits (digit height + 10mm/0.4")
Minimum measuring area:
0.2"x 0.2" (5mm x 5mm)
Minimum radius of curvature:
Convex: 0.12: (3mm)
Concave: 1.2" (30mm)
Model No.
PTG-3500
$479.95
(Not Shown)
ULTRASONIC THICKNESS GAGE
With Thru Coating Capabilities
•
State of the art, digital tester is
capable of reading wall
thickness thru coatings and
point without affecting the
measurement and is packed
with the most popular features
including basic measurement,
Scanning
Capabilities,
Adjustable Sound Velocity,
extended memory and RS 232
output capabilities.
The
PTG-3550
comes com-
plete with 1 pc external auto-
detect ferrous/non-ferrous
probe, 2 substrate samples
(steel, aluminum), 4 cali-
brated thickness specimens,
carry case, batteries and op-
eration manual.
•
This dynamic sonic gauge is
designed to measure the
thickness of metallic and non-
metallic materials such as steel,
aluminum, titanium, plastics
ceramic, glass and any other
good ultrasonic wave conductor
as long as it has parallel top and
bottom surfaces.
Specifications:
Display type:
4-digit LCD w/back light
Min. display range:
0.003 (if>3.93", 0.0003"(if<3.93")
Measuring range:
Standard mode: 0.03-8.0"in steel
Thru coating mode: 0.118"-.905"
3.0-23mm w/standard probe
Accuracy:
±1%x H + 0.0007"
(H=displayed value)
Sound velocity range:
3280-32805ft/s (1000-9999m/s
Operating temperature:
32-122º
Frequency:
4MHz
Update range:
4Hz
Memory:
500 test values
Output:
RS 232
Power supply:
3V AA Alkaline batt. (2pc)
Battery life:
Approx. 100 Hours. (w/backlight off)
Power consumption:
Working current is less than 3V
Dimensions:
5.86"x 2.87"x 1.25" (149x 73 32mm)
Weight:
5.6 oz. (160g)
MODEL No.
UTG-2600
$1195.00
w/Certification
of Calibration
Minimum substrate thickness:
Ferrous 20 mils (0.5mm
Non-ferrous: 2 mils (50mm)
Calibration:
Zero calibration/Foil calibration
*Max. surface temp. of test object:
302ºF (contact time max is 2 sec.
Power source:
4-AAA batteries
Dimensions:
161 x 69 x 32mm
Weight:
9oz. (260g)
Model No.
PTG-3550
$479.95
(Shown)
DIGITAL VIBRATION TESTER
The multi-functional vibration meter will measure velocity, accelera-
tion, displacement and RPM. Full frequency ranges are utilized for
broad detection abilities.
•
Quick accurate analysis for
checking balance and alignment of
a rotating object.
•
Large LCD display.
•
RS232 output.
•
Inch/Metric conversion with the
push of a button.
•
Statistics: Mean, Max, Min No. of
measurements and Standard
deviation.
•
Max hold function.
•
Regulated output (AC output 2.0V
peak full scale.
Frequency range: 10Hz-1KHz
Frequency range: 10Hz-10KHz
Frequency range: 10Hz-1KHz
Frequency range: 10Hz-500KHz
MODEL No.
DVM-1000
$595.00
Specifications:
Acceleration: Peak value: 0.1-200 m/s or 0.3-656 ft/m/s
Velocity (RMS): RMS: 0.1-400 (mm/s) or 0.004-16.0 inch/s
Displacement: Peak to Peak 0.001 - 2.0(mm) or 0.04-80mil
RPM (revolution) . . . . . . . . . . . . . . . . . . . 5-100,000 r/min
Requency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.1-10KHz
Accuracy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <5%
Operating Temperature . . . . . . . . . . . . . . . . . . . . . 0-45ºC
Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-AAA batteries
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . 161 x 69 x 32mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300g
Includes
1 Powerful Magnet
1-Accelerator
1-Stinger Probe (cone)
1-Stinger Probe (ball)
1-Operation Manual
Carry Case
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 88
• The coating thickness gauge can perform two
different methods of calculating thickness
measurement by utilizing the characteristics of
both eddy current and magnetic induction.
• This sleek integrated coating thickness gauge is
capable of measuring coatings on Fe and NFe
metallic substrates and has a push button FLIP
screen for easy reading while testing upside down.
• With this state of the art thickness gauge, you can
easily detect the thickness of nonmagnetic coating
on a magnetic substrate (ferrous) or an insulating
coating on a non-magnetic conductive substrate
(non-ferrous) utilizing either an integrated probe or
our version that comes with 1 auto-detect external
probe.
• The PTG-4500 utilizes an integrated probe that can
automatically detect a Ferrous or Non-Ferrous
substrate and comes with 2 substrate samples (steel
aluminum),2-calibrated thickness samples, carry
case, battery and operations.
Measuring Range:
0-1000µm (0-40 mils)
Accuracy:
+/-2 µm +3%H (H=actual value)
+/-0.1mils +3%H (H=actual value)
Display:
3-Digits
Min Measuring Area:
0.2” x 0.2” (5mm x 5mm)
Min Substrate Thickness:
Fe: 20mils(0.5mm)
NFe: 2 mils (50mm)
COATING THICKNESS GAGE WITH FLIP DISPLAY
MODEL No.
PTG-4500
$475.00
5 Year
Warranty
Lifetime
Tech Support
Simplicity in Coating Thickness Measurement
