Page 89 Penn Tool Co. Precision Tooling 2014 Sale Catalog
P. 89
The multi-fucntional vibration meter will measure Velocity, Acceleration,
Displacement, and RPM. Full frequency ranges are utilized for broad detection
abilities.
• Quick accurate analysis for checking balance
and alignment of a rotating object.
• Large LCD display
• Statistics: Mean, Max, MIN, No. of
Measurements and Std deviation
• Inch/Metric Conversion with the push of a
button
• Max Hold Function
• Regulated Output(AC output 2.0v peak full
scale
Frequency Range: 10Hz-1KHz
Frequency Range: 10Hz-10KHz
Frequency Range: 10Hz-1KHz
Frequency Range: 10Hz-500Hz
Specifications:
Acceleration . . . . Peak Value: 0.1-200m/s
or 0.3-656 ft/m/s
Velocity(RMS) . . . . . . . RMS:0.1-400(mm/s)
or 0.004-16.0inch/s
Displacement Peak to Peak 0.001-2.0(mm)
or 0.04-80mil
RPM(revolution) . . . . . . . . 5-100,00 r/min
Frequency . . . . . . . . . . . . . . . . 0.1-10KHz
Accuracy . . . . . . . . . . . . . . . . . . . . . . <5%
Operating Temp . . . . . . . . . . . . . . . 0-45ºC
Power . . . . . . . . . . . . . . . .4-AAA Batteries
Dimensions . . . . . . . . . . 161 x 69 x 32mm
Weight . . . . . . . . . . . . . . . . . . . . . . 300g
DIGITAL VIBRATION TESTER
MODEL No.
DVM-1000
Reg. $595.00
DIGITAL FORCE GAGE
Automatic peak/hold functions tolerance limit functions and average calculations
of memorized data, show off some basic abilities. All digital force gauges can read
in three resolution modes, lbf, kgf, and newtons. Each force gauge is supplied in kit
form containing 5 measuring attachments and plastic carrying case. Force Gauges
can be hand-held or mounted to an optional force gauge stand.
• Designed for tension/compression measurements
• Min/Max Setting with Go/No Go Light Feature
• Peak value controls • Heavy-Duty Construction
• Auto weight conversion • Extreme Accuracy to +/- 0.5%
• Versatile range of gages are supplied in complete test kit
form containing full set of accessories and carry case.
• Can be hand-held or mounted to optional test stand
GEAR TEETH HARDNESS TESTER
MODEL No.
PHT-1840
Reg. $2095.00
• This dedicated unit is designed to test gear teeth and other difficult to access
applications.
• The 1840 is loaded with the same features found on the base 1800 version which
includes memory, USB output and software for downloading to your PC.
• The 1840 hardness tester is capable of measuring the surface hardness of a broad
variety of metals on flat and round surfaces.
• This instrument comes complete with a dedicated DL impact device, calibrated
test block and rugged carry case.
Designed to test large hard parts:
Example: tool steel should be close to
1" thick of solid material
•
The Phase II force gauges include a
direct dual scale reading in both Ibf
and kgf, eliminating the need for two
separate gauges in the shop. Force
gauges can be hand-held or mounted
to an optional force gauge test stand
•
All force gauges come as a complete
kit, containing 5 measuring
attachments and plastic carrying
case. Numerous models are available
to cover a complete range of force
capacities.
FORCE GAUGES With Direct Scale Readout
Capacity
2 N
7.19 oz.
203.94 g
5 N
17.99 oz.
509.85 g
10 N
2.25 lb.
1 oz.
50 N
11.24 lb.
5.10 kg
100 N
22.48 lb.
10.19 kg
500 N
112.40 lb. 0.01 lb.
50.99 kg
1000 N
224.80 lb. 0.05 lb.
101.97 kg 0.005 kg
Resolution
0.001N
0.001 oz.
0.0001 kg
0.001N
0.001 oz.
0.0001 kg
0.005N
0.0005 lb.
0.005 oz.
0.01N
0.001 lb.
0.001 kg
0.05N
0.005 lb.
0.005 kg
0.1N
0.01 kg
0.5N
Model No.
DFG-0100
DFG-0200
DFG-0300
DFG-0400
DFG-0500
DFG-0600
DFG-0700
Price
$475.00
475.00
475.00
475.00
475.00
475.00
475.00
$569.50
$1995.00
• This dedicated unit is designed to
test gear teeth and other difficult to
access applications.
• The 1740 is an economically
priced hardness tester that is loaded
with the same features found on
the base 1700 version.
• The 1740 hardness tester is capable
of measuring the surface hardness
of a broad variety of metals on flat
and round surfaces.
• This instrument comes complete
with a dedicated DL impact device,
calibrated test block and rugged
carry case.
GEAR TEETH HARDNESS TESTER
MODEL No.
PHT-1740
Reg. $1895.00
$1795.00
Designed to test large hard parts:
Example: tool steel should be close to
1" thick of solid material
NEW DIGITAL DUROMETERS
Shore A scale is for testing the following Shore D scale is for testing the following
materials:
Rubber:
Soft vulcanized (ie tyre), natural
nitrile
Elastomeretric materials (rubber & rub-
ber like):
GR-S, GR-1, neopene, thiokol,
flexible polyacrylic esters neoprene,
thiokol, flexible polyacrilic esters.
Other:
Wax, felt, leather etc. (materials
that normally yield under fingernail pres-
sure, such as the heel on your shoe).
materials:
Rubber:
Hard
Plastics:
Harder grades such as rigid
thermoplastics,
plexiglass,
thermoploystrene, vinyl, sheet, cellulode
acetate, thermosetting
Laminates (ie fornica)
Other:
Paper filled calendar rolls, calen-
dar bowls, etc. (materials that would not
normally indent under fingernail pres-
sure, such as a pocket comb or bowling
ball).
"A" Scale
MODEL No.
PHT-960
Reg. $199.00
$189.95
"D" Scale
MODEL No.
PHT-980
Reg. $199.00
$189.95
• Auto Hold feature
• Accurate and repetitive deviation
= 20~90HSA
• HSA<+/-1 grade
• Uses 1-SR44 Button Cell Battery
• Custom rugged carry case
Specifications:
Model
AFG-100
AFG-200
AFG-300
AFG-400
AFG-500
AFG-600
AFG-700
Capacity
1 lb./0.90kg
5 lb./2.26kg
10 lb./4.53kg
20 lb./9.07kg
50 lb./22.67kg
100 lb./45.36kg
Resolution
0.01
0.025
0.05
0.1
0.25
0.5
Price
$195.00
195.00
195.00
195.00
195.00
195.00
$190.00
Optional Stand
9.25"L x 5.98"W x 15.75"H
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 89
Displacement, and RPM. Full frequency ranges are utilized for broad detection
abilities.
• Quick accurate analysis for checking balance
and alignment of a rotating object.
• Large LCD display
• Statistics: Mean, Max, MIN, No. of
Measurements and Std deviation
• Inch/Metric Conversion with the push of a
button
• Max Hold Function
• Regulated Output(AC output 2.0v peak full
scale
Frequency Range: 10Hz-1KHz
Frequency Range: 10Hz-10KHz
Frequency Range: 10Hz-1KHz
Frequency Range: 10Hz-500Hz
Specifications:
Acceleration . . . . Peak Value: 0.1-200m/s
or 0.3-656 ft/m/s
Velocity(RMS) . . . . . . . RMS:0.1-400(mm/s)
or 0.004-16.0inch/s
Displacement Peak to Peak 0.001-2.0(mm)
or 0.04-80mil
RPM(revolution) . . . . . . . . 5-100,00 r/min
Frequency . . . . . . . . . . . . . . . . 0.1-10KHz
Accuracy . . . . . . . . . . . . . . . . . . . . . . <5%
Operating Temp . . . . . . . . . . . . . . . 0-45ºC
Power . . . . . . . . . . . . . . . .4-AAA Batteries
Dimensions . . . . . . . . . . 161 x 69 x 32mm
Weight . . . . . . . . . . . . . . . . . . . . . . 300g
DIGITAL VIBRATION TESTER
MODEL No.
DVM-1000
Reg. $595.00
DIGITAL FORCE GAGE
Automatic peak/hold functions tolerance limit functions and average calculations
of memorized data, show off some basic abilities. All digital force gauges can read
in three resolution modes, lbf, kgf, and newtons. Each force gauge is supplied in kit
form containing 5 measuring attachments and plastic carrying case. Force Gauges
can be hand-held or mounted to an optional force gauge stand.
• Designed for tension/compression measurements
• Min/Max Setting with Go/No Go Light Feature
• Peak value controls • Heavy-Duty Construction
• Auto weight conversion • Extreme Accuracy to +/- 0.5%
• Versatile range of gages are supplied in complete test kit
form containing full set of accessories and carry case.
• Can be hand-held or mounted to optional test stand
GEAR TEETH HARDNESS TESTER
MODEL No.
PHT-1840
Reg. $2095.00
• This dedicated unit is designed to test gear teeth and other difficult to access
applications.
• The 1840 is loaded with the same features found on the base 1800 version which
includes memory, USB output and software for downloading to your PC.
• The 1840 hardness tester is capable of measuring the surface hardness of a broad
variety of metals on flat and round surfaces.
• This instrument comes complete with a dedicated DL impact device, calibrated
test block and rugged carry case.
Designed to test large hard parts:
Example: tool steel should be close to
1" thick of solid material
•
The Phase II force gauges include a
direct dual scale reading in both Ibf
and kgf, eliminating the need for two
separate gauges in the shop. Force
gauges can be hand-held or mounted
to an optional force gauge test stand
•
All force gauges come as a complete
kit, containing 5 measuring
attachments and plastic carrying
case. Numerous models are available
to cover a complete range of force
capacities.
FORCE GAUGES With Direct Scale Readout
Capacity
2 N
7.19 oz.
203.94 g
5 N
17.99 oz.
509.85 g
10 N
2.25 lb.
1 oz.
50 N
11.24 lb.
5.10 kg
100 N
22.48 lb.
10.19 kg
500 N
112.40 lb. 0.01 lb.
50.99 kg
1000 N
224.80 lb. 0.05 lb.
101.97 kg 0.005 kg
Resolution
0.001N
0.001 oz.
0.0001 kg
0.001N
0.001 oz.
0.0001 kg
0.005N
0.0005 lb.
0.005 oz.
0.01N
0.001 lb.
0.001 kg
0.05N
0.005 lb.
0.005 kg
0.1N
0.01 kg
0.5N
Model No.
DFG-0100
DFG-0200
DFG-0300
DFG-0400
DFG-0500
DFG-0600
DFG-0700
Price
$475.00
475.00
475.00
475.00
475.00
475.00
475.00
$569.50
$1995.00
• This dedicated unit is designed to
test gear teeth and other difficult to
access applications.
• The 1740 is an economically
priced hardness tester that is loaded
with the same features found on
the base 1700 version.
• The 1740 hardness tester is capable
of measuring the surface hardness
of a broad variety of metals on flat
and round surfaces.
• This instrument comes complete
with a dedicated DL impact device,
calibrated test block and rugged
carry case.
GEAR TEETH HARDNESS TESTER
MODEL No.
PHT-1740
Reg. $1895.00
$1795.00
Designed to test large hard parts:
Example: tool steel should be close to
1" thick of solid material
NEW DIGITAL DUROMETERS
Shore A scale is for testing the following Shore D scale is for testing the following
materials:
Rubber:
Soft vulcanized (ie tyre), natural
nitrile
Elastomeretric materials (rubber & rub-
ber like):
GR-S, GR-1, neopene, thiokol,
flexible polyacrylic esters neoprene,
thiokol, flexible polyacrilic esters.
Other:
Wax, felt, leather etc. (materials
that normally yield under fingernail pres-
sure, such as the heel on your shoe).
materials:
Rubber:
Hard
Plastics:
Harder grades such as rigid
thermoplastics,
plexiglass,
thermoploystrene, vinyl, sheet, cellulode
acetate, thermosetting
Laminates (ie fornica)
Other:
Paper filled calendar rolls, calen-
dar bowls, etc. (materials that would not
normally indent under fingernail pres-
sure, such as a pocket comb or bowling
ball).
"A" Scale
MODEL No.
PHT-960
Reg. $199.00
$189.95
"D" Scale
MODEL No.
PHT-980
Reg. $199.00
$189.95
• Auto Hold feature
• Accurate and repetitive deviation
= 20~90HSA
• HSA<+/-1 grade
• Uses 1-SR44 Button Cell Battery
• Custom rugged carry case
Specifications:
Model
AFG-100
AFG-200
AFG-300
AFG-400
AFG-500
AFG-600
AFG-700
Capacity
1 lb./0.90kg
5 lb./2.26kg
10 lb./4.53kg
20 lb./9.07kg
50 lb./22.67kg
100 lb./45.36kg
Resolution
0.01
0.025
0.05
0.1
0.25
0.5
Price
$195.00
195.00
195.00
195.00
195.00
195.00
$190.00
Optional Stand
9.25"L x 5.98"W x 15.75"H
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 89
