Page 116 Penn Tool Co. Precision Tooling Buyer's Guide 2019
P. 116
114
• Major breakthrough in utilizing computer software
with a measuring instrument.
• With this new concept, accurate measurements of
internal threads and compensation calculations for
ball diameter variations or lead angles are made
extremely simple.
• The CD Rom supplied with the IPD Gage can
be used in any Windows compatible PC to
obtain all data required for accurate inspection
of any specific internal thread without the
necessity of a master gage.
• Easy to set IPD Gage with Micrometer
or Gage Blocks, etc.
• Universal. Can be used as general purpose internal
gage for measuring bores, grooves and pitch diameters
of screw threads and internal gears, etc.
• Indicator alone, with the included adapter, extensions
and optional contact points, makes it possible to
measure internal threads and bores from 7 ⁄ " to 18".
1 2
• Rigid construction plus special high precision pivot
bearings assure repeatability of 0.0002" or less.
• Balanced body design for easy and convenient handling.
• Adjustable contact pressure.
• Carbide ball contact points are optional, not included.
• System includes internal gage, 1" travel indicator,
indicator-adapter, 8 extensions ( ⁄ ", ⁄ ", ⁄ ", ⁄ ", 1",
1 4
3 8
1 2
3 4
2", 3" and 4" long), measuring tip organizer,
2 standard contact points ⁄ " long, allen wrench,
1 4
fitted case plus CD ROM for internal pitch diameter
threads and instruction manual.
IPD Gage + Software
A Complete Internal Pitch Diameter Measuring System
IPD Gage Accessories
CD Rom
The IPD software complies with ANSI standards;
fully compensates for the effects of lead angle.
User Friendly
On screen explanation, no commands to remember.
Error free data entry, will detect invalid input data.
Universal
Supports UN series and Metric threads as well as threads
with user defined thread angle and number of starts
for Acme, Whitworth and multiple start threads.
• Software calculates the correct diameter for any
chosen ball contact point within the specified range
per table below.
• Diameter setting with micrometer or gage blocks,
no master thread setting ring required.
DESCRIPTION
PART NO.
PRICE
IPD Gage + Software
30-640-7
$997.05
Metric indicator for IPD gage
20-508-8
158.40
Carbide Ball Contact Points, " Length, #4-48 Thread
1
4
BALL DIAMETER
UN SERIES
ACME
METRIC
TOLERANCES
THREADS
THREADS
THREADS
PART
PRICE
± .0001"
PER INCH
PER INCH
PITCH (MM)
NUMBER
PER PAIR
0.03125" ( ⁄ )
1
32
24–14
1.25 –1.75
30-641-5
$43.05
0.04687" ( ⁄ )
3
64
16–8
1.75–3
30-642-3
43.05
0.0625" ( ⁄ )
1
16
11–6
2.5–4
30-643-1
43.05
0.07813" ( ⁄ )
5
64
9–5
3–5
30-644-9
45.30
0.09375" ( ⁄ )
3
32
6–4
4–6
30-645-6
46.25
0.10938" ( ⁄ )
7
64
6–3.5
5
4–7
30-646-4
46.25
0.125" ( ⁄ )
1 8
5–3
4
5–8
30-647-2
52.90
0.1875" ( ⁄ )
3
16
3.5–2
3
7–13
30-648-0
52.90
0.250" ( ⁄ )
1 4
3–1.5
2
8–17
30-649-8
52.90
4 Pair Carbide Ball Contact Points,
Package #1 - ⁄ ", ⁄ ", ⁄ ", ⁄ " dia. covering
1
32
3
64
1
16
3
32
30-637-3
177.55
UN Series threads from 24 to 4 pitch.
7 Pair Carbide Ball Contact Points,
Package #2 - ⁄ ", ⁄ ", ⁄ ", ⁄ ", ⁄ ",
1
32
3
64
1
16
5
64
3
32
7
⁄ ", ⁄ " dia. covering UN Series 24 to 3 pitch
64
1 8
30-638-1
262.56
single and multiple starts.
ters
Indicator with Adaptor
for 7 ⁄ to 18".
1
2
Specifications
Measuring range: Bores
0.93" to 8"
Nominal Size Threads
1 ⁄ to 8" 1 8
Extended range with included
indicator adapter
7 ⁄ to 18" 1 2
Gage arm travel
0.625"
Maximum reach in 1 ⁄ " dia. bore
1 4
4.8"
1" Travel indicator graduation
0.0005"
MADE IN USA
Thread Triangles
• Thread Triangles quickly measure pitch diameter of all
60 degree threads from 4 to 80 pitch, standard and special.
• Instantly classifies thread as 2a, 3a.
• No complicated formulas to figure! For any standard thread
refer directly to chart.
• Thread Triangles nest well into the "V" of the thread instead
of making just point contact.
• Micrometer rests on two parallel flat surfaces for better feel.
• Each set includes: thread triangle, holders and chart.
• 2 year warranty.
10-449-7
• Convenient Neoprene holders, fit any make micro meter spindle.
13-109-4
• Alternative way to hold thread triangle in place.
DESCRIPTION
PART NO.
PRICE
Thread Triangles w/Neoprene Holders
10-449-7
$70.15
Thread Triangles w/Holding Loop
13-109-4
109.43
10-449-7
Micrometer sold separately
13-109-4
Economy Thread
Measuring Wire Set
• 16 different sizes.
• 48 wires to measure the pitch dia. on threads from
3-48 threads per inch and metric threads from 0.5 mm
to 6 mm pitch.
• Instruction chart included.
DESCRIPTION
PART NO.
PRICE
Thread Measuring Wire Set
65-013-5
$24.45
65-013-5
• 2 year warranty.
• Major breakthrough in utilizing computer software
with a measuring instrument.
• With this new concept, accurate measurements of
internal threads and compensation calculations for
ball diameter variations or lead angles are made
extremely simple.
• The CD Rom supplied with the IPD Gage can
be used in any Windows compatible PC to
obtain all data required for accurate inspection
of any specific internal thread without the
necessity of a master gage.
• Easy to set IPD Gage with Micrometer
or Gage Blocks, etc.
• Universal. Can be used as general purpose internal
gage for measuring bores, grooves and pitch diameters
of screw threads and internal gears, etc.
• Indicator alone, with the included adapter, extensions
and optional contact points, makes it possible to
measure internal threads and bores from 7 ⁄ " to 18".
1 2
• Rigid construction plus special high precision pivot
bearings assure repeatability of 0.0002" or less.
• Balanced body design for easy and convenient handling.
• Adjustable contact pressure.
• Carbide ball contact points are optional, not included.
• System includes internal gage, 1" travel indicator,
indicator-adapter, 8 extensions ( ⁄ ", ⁄ ", ⁄ ", ⁄ ", 1",
1 4
3 8
1 2
3 4
2", 3" and 4" long), measuring tip organizer,
2 standard contact points ⁄ " long, allen wrench,
1 4
fitted case plus CD ROM for internal pitch diameter
threads and instruction manual.
IPD Gage + Software
A Complete Internal Pitch Diameter Measuring System
IPD Gage Accessories
CD Rom
The IPD software complies with ANSI standards;
fully compensates for the effects of lead angle.
User Friendly
On screen explanation, no commands to remember.
Error free data entry, will detect invalid input data.
Universal
Supports UN series and Metric threads as well as threads
with user defined thread angle and number of starts
for Acme, Whitworth and multiple start threads.
• Software calculates the correct diameter for any
chosen ball contact point within the specified range
per table below.
• Diameter setting with micrometer or gage blocks,
no master thread setting ring required.
DESCRIPTION
PART NO.
PRICE
IPD Gage + Software
30-640-7
$997.05
Metric indicator for IPD gage
20-508-8
158.40
Carbide Ball Contact Points, " Length, #4-48 Thread
1
4
BALL DIAMETER
UN SERIES
ACME
METRIC
TOLERANCES
THREADS
THREADS
THREADS
PART
PRICE
± .0001"
PER INCH
PER INCH
PITCH (MM)
NUMBER
PER PAIR
0.03125" ( ⁄ )
1
32
24–14
1.25 –1.75
30-641-5
$43.05
0.04687" ( ⁄ )
3
64
16–8
1.75–3
30-642-3
43.05
0.0625" ( ⁄ )
1
16
11–6
2.5–4
30-643-1
43.05
0.07813" ( ⁄ )
5
64
9–5
3–5
30-644-9
45.30
0.09375" ( ⁄ )
3
32
6–4
4–6
30-645-6
46.25
0.10938" ( ⁄ )
7
64
6–3.5
5
4–7
30-646-4
46.25
0.125" ( ⁄ )
1 8
5–3
4
5–8
30-647-2
52.90
0.1875" ( ⁄ )
3
16
3.5–2
3
7–13
30-648-0
52.90
0.250" ( ⁄ )
1 4
3–1.5
2
8–17
30-649-8
52.90
4 Pair Carbide Ball Contact Points,
Package #1 - ⁄ ", ⁄ ", ⁄ ", ⁄ " dia. covering
1
32
3
64
1
16
3
32
30-637-3
177.55
UN Series threads from 24 to 4 pitch.
7 Pair Carbide Ball Contact Points,
Package #2 - ⁄ ", ⁄ ", ⁄ ", ⁄ ", ⁄ ",
1
32
3
64
1
16
5
64
3
32
7
⁄ ", ⁄ " dia. covering UN Series 24 to 3 pitch
64
1 8
30-638-1
262.56
single and multiple starts.
ters
Indicator with Adaptor
for 7 ⁄ to 18".
1
2
Specifications
Measuring range: Bores
0.93" to 8"
Nominal Size Threads
1 ⁄ to 8" 1 8
Extended range with included
indicator adapter
7 ⁄ to 18" 1 2
Gage arm travel
0.625"
Maximum reach in 1 ⁄ " dia. bore
1 4
4.8"
1" Travel indicator graduation
0.0005"
MADE IN USA
Thread Triangles
• Thread Triangles quickly measure pitch diameter of all
60 degree threads from 4 to 80 pitch, standard and special.
• Instantly classifies thread as 2a, 3a.
• No complicated formulas to figure! For any standard thread
refer directly to chart.
• Thread Triangles nest well into the "V" of the thread instead
of making just point contact.
• Micrometer rests on two parallel flat surfaces for better feel.
• Each set includes: thread triangle, holders and chart.
• 2 year warranty.
10-449-7
• Convenient Neoprene holders, fit any make micro meter spindle.
13-109-4
• Alternative way to hold thread triangle in place.
DESCRIPTION
PART NO.
PRICE
Thread Triangles w/Neoprene Holders
10-449-7
$70.15
Thread Triangles w/Holding Loop
13-109-4
109.43
10-449-7
Micrometer sold separately
13-109-4
Economy Thread
Measuring Wire Set
• 16 different sizes.
• 48 wires to measure the pitch dia. on threads from
3-48 threads per inch and metric threads from 0.5 mm
to 6 mm pitch.
• Instruction chart included.
DESCRIPTION
PART NO.
PRICE
Thread Measuring Wire Set
65-013-5
$24.45
65-013-5
• 2 year warranty.
