Page 120 Penn Tool Co. Precision Tooling Buyer's Guide 2019
P. 120
118
SIZE
PART NO.
PRICE
.001
61-680-5
$9.15
.002
61-681-3
9.15
.005
61-682-1
9.90
.010
61-683-9
11.05
.015
61-684-7
11.60
.020
61-685-4
12.70
.025
61-686-2
12.30
.031
61-687-0
14.20
Shim Stock
• All rolls are 6" x 100".
• Full hard, cold rolled, low carbon 1010 steel.
• Rockwell hardness RB90 - 100.
• Meets SAE J-403g 1010, FED QQS- 698, ASTM
A-109, AISI 1010 and AMS 5045 Full Hard.
• Approx. Tensile Strength: 80,000 p.s.i.
• #2 Bright finish.
• Analysis: C .08 – .13, Mn .30 – .60,
P .03 max., S .035 max.
STEEL SHIM TOLERANCES
.001-.003
±10%
.0035-.006
±.0005
.007-.018
±.00075
.020-.025
±.001
.031
±.0015
Width Tolerance ±.005
15 Pc
Steel & Brass
Shim Assortments
6" x 12" Sheets
• Shim stock assortments are a shop necessity and work
for production or maintenance purposes where shims
in various thicknesses are required.
• Thickness (1 ea.): 0.001, 0.0015, 0.002, 0.003, 0.004,
0.005, 0.006, 0.007, 0.008, 0.010,
0.012, 0.015, 0.020, 0.025, .031"
MATERIAL
PART NO.
PRICE
Steel
61-698-7
$38.45
Brass
61-699-5
76.00
Brass
ssortments
et
s
MADE IN USA
Individual Pin Gages
Range 0.011" - 1.000"
• Black oxide coating prevents corrosion and shows gage wear.
• Hardened drill rod RC 60-62
• Overall length: 2"
BRIGHT
BLACK
PREMIUM
0.011 —0.060" specify size $3.15 ea.
$3.75 ea.
$4.30 ea.
0.061 —0.500" specify size
3.15 ea.
3.75 ea.
3.80 ea.
0.501 —0.625" specify size
3.75 ea.
4.95 ea.
4.60 ea.
0.626 —0.750" specify size
5.30 ea.
6.25 ea.
6.70 ea.
0.751 —0.832" specify size
8.10 ea.
8.70 ea.
10.85 ea.
0.833 —0.916" specify size
9.35 ea.
9.95 ea.
11.65 ea.
0.917 —1.000" specify size
9.95 ea.
11.20 ea.
12.55 ea.
Unless specified with the order, individual pin gages
will be supplied in the minus tolerance (–0.0002" + 0.0000")
Pin Gage Handles
& Set
• Comfortable, ergonomically made
handle for pin gages.
• Can be used with GO pin (green)
on one end, NO GO pin (red) on
opposite end.
PIN RANGE
PART NO.
PRICE
0.011 - 0.060"
13-311-6
$17.15
0.061 - 0.250"
13-312-4
19.10
0.251 - 0.500"
13-313-2
21.05
0.501 - 0.625"
13-314-0
22.05
0.626 - 0.750"
13-315-7
22.05
0.751 - 0.832"
13-316-5
23.00
0.833 - 0.916"
13-317-3
23.00
0.917 - 1.000"
13-318-1
24.95
8 Pc. Set of Above
13-310-8
179.05
13-310-8
13-316-5
30-270-3
Plug gage
sold separately
Plug Gage Handle
• Handles all Plug Gages sizes from
1
⁄ " thru ⁄ " dia. (0.8 mm thru 12.5 mm)
32
1 2
• Go and No Go clearly marked.
DESCRIPTION
PART NO.
PRICE
Plug Gage Handle
30-270-3
$24.20
GO & GO/NO GO Gage Handles
• Select handle with range
appropriate for pins to be held.
Choose bushings to fit the
specific pins ordered.
• Single end has green collet.
SIZE RANGE
SINGLE END
DOUBLE END
MIN. - MAX.
PART NO.
PRICE
PART NO.
PRICE
0.010 - 0.075
23-001-1
$6.25
23-009-4
$10.15
0.075 - 0.180
23-002-9
6.80
23-010-2
11.05
0.180 - 0.281
23-003-7
7.95
23-011-0
13.00
0.281 - 0.406
23-004-5
9.05
23-012-8
15.25
0.406 - 0.510
23-005-2
10.45
23-013-6
18.65
0.510 - 0.635
23-006-0
14.45
23-014-4
23.70
0.635 - 0.760
23-007-8
17.75
23-015-1
27.05
0.760 - 1.010
23-008-6
27.30
23-016-9
41.65
23-009-4
• Bushings located on page 120.
SIZE
PART NO.
PRICE
.001
61-680-5
$9.15
.002
61-681-3
9.15
.005
61-682-1
9.90
.010
61-683-9
11.05
.015
61-684-7
11.60
.020
61-685-4
12.70
.025
61-686-2
12.30
.031
61-687-0
14.20
Shim Stock
• All rolls are 6" x 100".
• Full hard, cold rolled, low carbon 1010 steel.
• Rockwell hardness RB90 - 100.
• Meets SAE J-403g 1010, FED QQS- 698, ASTM
A-109, AISI 1010 and AMS 5045 Full Hard.
• Approx. Tensile Strength: 80,000 p.s.i.
• #2 Bright finish.
• Analysis: C .08 – .13, Mn .30 – .60,
P .03 max., S .035 max.
STEEL SHIM TOLERANCES
.001-.003
±10%
.0035-.006
±.0005
.007-.018
±.00075
.020-.025
±.001
.031
±.0015
Width Tolerance ±.005
15 Pc
Steel & Brass
Shim Assortments
6" x 12" Sheets
• Shim stock assortments are a shop necessity and work
for production or maintenance purposes where shims
in various thicknesses are required.
• Thickness (1 ea.): 0.001, 0.0015, 0.002, 0.003, 0.004,
0.005, 0.006, 0.007, 0.008, 0.010,
0.012, 0.015, 0.020, 0.025, .031"
MATERIAL
PART NO.
PRICE
Steel
61-698-7
$38.45
Brass
61-699-5
76.00
Brass
ssortments
et
s
MADE IN USA
Individual Pin Gages
Range 0.011" - 1.000"
• Black oxide coating prevents corrosion and shows gage wear.
• Hardened drill rod RC 60-62
• Overall length: 2"
BRIGHT
BLACK
PREMIUM
0.011 —0.060" specify size $3.15 ea.
$3.75 ea.
$4.30 ea.
0.061 —0.500" specify size
3.15 ea.
3.75 ea.
3.80 ea.
0.501 —0.625" specify size
3.75 ea.
4.95 ea.
4.60 ea.
0.626 —0.750" specify size
5.30 ea.
6.25 ea.
6.70 ea.
0.751 —0.832" specify size
8.10 ea.
8.70 ea.
10.85 ea.
0.833 —0.916" specify size
9.35 ea.
9.95 ea.
11.65 ea.
0.917 —1.000" specify size
9.95 ea.
11.20 ea.
12.55 ea.
Unless specified with the order, individual pin gages
will be supplied in the minus tolerance (–0.0002" + 0.0000")
Pin Gage Handles
& Set
• Comfortable, ergonomically made
handle for pin gages.
• Can be used with GO pin (green)
on one end, NO GO pin (red) on
opposite end.
PIN RANGE
PART NO.
PRICE
0.011 - 0.060"
13-311-6
$17.15
0.061 - 0.250"
13-312-4
19.10
0.251 - 0.500"
13-313-2
21.05
0.501 - 0.625"
13-314-0
22.05
0.626 - 0.750"
13-315-7
22.05
0.751 - 0.832"
13-316-5
23.00
0.833 - 0.916"
13-317-3
23.00
0.917 - 1.000"
13-318-1
24.95
8 Pc. Set of Above
13-310-8
179.05
13-310-8
13-316-5
30-270-3
Plug gage
sold separately
Plug Gage Handle
• Handles all Plug Gages sizes from
1
⁄ " thru ⁄ " dia. (0.8 mm thru 12.5 mm)
32
1 2
• Go and No Go clearly marked.
DESCRIPTION
PART NO.
PRICE
Plug Gage Handle
30-270-3
$24.20
GO & GO/NO GO Gage Handles
• Select handle with range
appropriate for pins to be held.
Choose bushings to fit the
specific pins ordered.
• Single end has green collet.
SIZE RANGE
SINGLE END
DOUBLE END
MIN. - MAX.
PART NO.
PRICE
PART NO.
PRICE
0.010 - 0.075
23-001-1
$6.25
23-009-4
$10.15
0.075 - 0.180
23-002-9
6.80
23-010-2
11.05
0.180 - 0.281
23-003-7
7.95
23-011-0
13.00
0.281 - 0.406
23-004-5
9.05
23-012-8
15.25
0.406 - 0.510
23-005-2
10.45
23-013-6
18.65
0.510 - 0.635
23-006-0
14.45
23-014-4
23.70
0.635 - 0.760
23-007-8
17.75
23-015-1
27.05
0.760 - 1.010
23-008-6
27.30
23-016-9
41.65
23-009-4
• Bushings located on page 120.
