Page 164 Penn Tool Co. Precision Tooling Buyer's Guide 2019
P. 164
162
Two Models
•
PosiTest DFT Ferrous (Model 31-135-7)
Measures non-magnetic coatings on steel
•
PosiTest DFT Combo (Model 31-134-0)
Measures both non-magnetic coatings
on steel AND non-conductive coatings on aluminum, brass, etc. Automatically
recognizes the substrate and takes a measurement.
PosiTest DFT Coating
®
Thickness Gages s
For Powder Coaters, Paint Applicators
& Contractors and Coating Inspectors
Features:
• Fast, repeatable measurements.
• Ready to measure - No calibration required for most applications.
• Range: 0-40 mils and 0-100 μm.
• Accuracy: ±(0.1mils + 3%)/±(2 μm + 3%).
• ZERO feature for rough or curved surfaces.
• 1 Point Calibration Adjustment feature for adjusting to the known
thickness of a shim placed over rough or curved surfaces.
• Displays the moving average for up to the last 10 measurements.
• Handy RESET feature when no zero reference is available.
• Strong, wear resistant, ruby-tipped probe.
• Flip Display for right-side-up viewing in any position.
• Audible and visual measurement indication.
• V-groove in probe for positioning on cylindrical parts.
• Basic instructions on the back of each gage.
• Mils/Microns switchable.
• Built-in wrist strap for added convenience and safety.
• Long Form Certificate of Calibration traceable to NIST.
• Conforms to National and International standards,
including ASTM D7091 and ISO 2808.
• Complete with: Built-in probe, wrist strap, precision plastic shims,
hard shell storage case, AAA alkaline battery,
Instructions and protective lends shield.
DESCRIPTION
PART NO.
PRICE
PosiTest DFT Combo
31-134-0
$867.90
PosiTest DFT Ferrous
31-135-7
618.30
3
1-135-7
)
Measures non-magnetic coatings on st
eel
1-134-0
)
Measures both non-ma
g
netic coati
ngs
oating
nt Applicators
ng Inspectors
31-134-0
Ultrasonic
Thickness Gage
A hand held microprocessor-controlled thickness
gage specifically designed for measuring metallic
and non-metallic materials such as steel, aluminum,
titanium, plastics, ceramics, glass and any other
good ultrasonic wave-conductor with parallel
top and bottom surfaces.
• Used in many areas of industry.
• Extremely easy to use.
• Can perform precise measurements on
various types of raw materials, component
parts and assembled machinery.
• Can also be used to monitor all types of
pipes and pressure vessels for loss of
thickness due to corrosion or erosion.
• After a simple calibration to a known
thickness or sound velocity, the gauge
will give accurate readings in inches
or millimeters.
• Includes: base unit (w/built-in calibration
block), 5 MHz dual sensor probe, 2 oz.
bottle of couplant gel, AAA battery set,
operation manual and carrying case.
• Specifications:
Display Type: Large 4-Digit LCD
Min. Display Unit: 0.001 /0.1 mm
"
Measuring Range: 0.04 - 8 (0.1 mm - 200 mm) in steel
"
w/standard probe (other values
depending on material)
Low Limit Steel Pipes: Min. dia. 0.8 x 0.1 (20 x 3 mm)
"
Display Accuracy: ±0.01 mm
Sound Velocity Range: 1640 - 29,527 Ft./S (500 - 9000 m/s)
Operating Temp.: 32° to 122°F (-5° to 40°C)
Frequency: 5 MHz
Update Range: 4 Hz
Power Supply: 1.5V AAA alkaline batteries (4 pc.)
Battery Life: Approx.: 250 hours/battery set
Dimensions: 4.9 x 2.6 x 0.9" (161 x 69 x 32 mm)
Weight: 0.7 Lbs. (300g)
Operating Current: <20 mA (3V)
DESCRIPTION
PART NO.
PRICE
Ultrasonic Thickness Gage
15-145-6
$634.20
Repl. Batteries (4 pk.)
60-187-2
3.95
15-145-6
15-993-9
Pocket Vibration Meters
• Measuring range: RMS vibration velocity
0.1 mm/s to 199.9 mm/s
• Frequency range: 10 HZ to 1000 Hz
• Display: 3.5 digit LCD
• Integrated accelerometer.
• Last valve hold.
DESCRIPTION
PART NO.
PRICE
Inch Pocket Vibration Meter
15-993-9
$359.50
Metric Pocket Vibration Meter
15-992-1
359.50
Repl. Battery (#375/303)
07-310-6
2.25
• Auto shut-off.
• Power supply: (2) 1.5V button cell batteries
• Dimensions: 150 x 22 x 18 mm
• Furnished in fitted case.
• Certificate of calibration included.
• 2 year warranty.
15-
99
3
-9
Surface Finish Comparators
• Conventional machining microfinish comparator:
Twenty-two replicated machined surface finish
specimens with examples of six different machining
processes calibrated in microinches (μ).
• Supplied in a leatherette case with instructions
& engineering data.
• Machined surface microfinish comparator.
DESCRIPTION
PART NO.
PRICE
S-22
30-690-2
$101.45
S-22 Certified
30-691-0
382.05
Type of Process
Finish Range Gaged (μ)
Lapping
2, 4, 8
Blanchard Grinding
16, 32
Conventional Grinding
8, 16, 32, 63
Shape Turning
32, 63, 125, 250, 500
Milling
63, 125, 250, 500
Profiling
63, 125, 250, 500
30-690-2
Two Models
•
PosiTest DFT Ferrous (Model 31-135-7)
Measures non-magnetic coatings on steel
•
PosiTest DFT Combo (Model 31-134-0)
Measures both non-magnetic coatings
on steel AND non-conductive coatings on aluminum, brass, etc. Automatically
recognizes the substrate and takes a measurement.
PosiTest DFT Coating
®
Thickness Gages s
For Powder Coaters, Paint Applicators
& Contractors and Coating Inspectors
Features:
• Fast, repeatable measurements.
• Ready to measure - No calibration required for most applications.
• Range: 0-40 mils and 0-100 μm.
• Accuracy: ±(0.1mils + 3%)/±(2 μm + 3%).
• ZERO feature for rough or curved surfaces.
• 1 Point Calibration Adjustment feature for adjusting to the known
thickness of a shim placed over rough or curved surfaces.
• Displays the moving average for up to the last 10 measurements.
• Handy RESET feature when no zero reference is available.
• Strong, wear resistant, ruby-tipped probe.
• Flip Display for right-side-up viewing in any position.
• Audible and visual measurement indication.
• V-groove in probe for positioning on cylindrical parts.
• Basic instructions on the back of each gage.
• Mils/Microns switchable.
• Built-in wrist strap for added convenience and safety.
• Long Form Certificate of Calibration traceable to NIST.
• Conforms to National and International standards,
including ASTM D7091 and ISO 2808.
• Complete with: Built-in probe, wrist strap, precision plastic shims,
hard shell storage case, AAA alkaline battery,
Instructions and protective lends shield.
DESCRIPTION
PART NO.
PRICE
PosiTest DFT Combo
31-134-0
$867.90
PosiTest DFT Ferrous
31-135-7
618.30
3
1-135-7
)
Measures non-magnetic coatings on st
eel
1-134-0
)
Measures both non-ma
g
netic coati
ngs
oating
nt Applicators
ng Inspectors
31-134-0
Ultrasonic
Thickness Gage
A hand held microprocessor-controlled thickness
gage specifically designed for measuring metallic
and non-metallic materials such as steel, aluminum,
titanium, plastics, ceramics, glass and any other
good ultrasonic wave-conductor with parallel
top and bottom surfaces.
• Used in many areas of industry.
• Extremely easy to use.
• Can perform precise measurements on
various types of raw materials, component
parts and assembled machinery.
• Can also be used to monitor all types of
pipes and pressure vessels for loss of
thickness due to corrosion or erosion.
• After a simple calibration to a known
thickness or sound velocity, the gauge
will give accurate readings in inches
or millimeters.
• Includes: base unit (w/built-in calibration
block), 5 MHz dual sensor probe, 2 oz.
bottle of couplant gel, AAA battery set,
operation manual and carrying case.
• Specifications:
Display Type: Large 4-Digit LCD
Min. Display Unit: 0.001 /0.1 mm
"
Measuring Range: 0.04 - 8 (0.1 mm - 200 mm) in steel
"
w/standard probe (other values
depending on material)
Low Limit Steel Pipes: Min. dia. 0.8 x 0.1 (20 x 3 mm)
"
Display Accuracy: ±0.01 mm
Sound Velocity Range: 1640 - 29,527 Ft./S (500 - 9000 m/s)
Operating Temp.: 32° to 122°F (-5° to 40°C)
Frequency: 5 MHz
Update Range: 4 Hz
Power Supply: 1.5V AAA alkaline batteries (4 pc.)
Battery Life: Approx.: 250 hours/battery set
Dimensions: 4.9 x 2.6 x 0.9" (161 x 69 x 32 mm)
Weight: 0.7 Lbs. (300g)
Operating Current: <20 mA (3V)
DESCRIPTION
PART NO.
PRICE
Ultrasonic Thickness Gage
15-145-6
$634.20
Repl. Batteries (4 pk.)
60-187-2
3.95
15-145-6
15-993-9
Pocket Vibration Meters
• Measuring range: RMS vibration velocity
0.1 mm/s to 199.9 mm/s
• Frequency range: 10 HZ to 1000 Hz
• Display: 3.5 digit LCD
• Integrated accelerometer.
• Last valve hold.
DESCRIPTION
PART NO.
PRICE
Inch Pocket Vibration Meter
15-993-9
$359.50
Metric Pocket Vibration Meter
15-992-1
359.50
Repl. Battery (#375/303)
07-310-6
2.25
• Auto shut-off.
• Power supply: (2) 1.5V button cell batteries
• Dimensions: 150 x 22 x 18 mm
• Furnished in fitted case.
• Certificate of calibration included.
• 2 year warranty.
15-
99
3
-9
Surface Finish Comparators
• Conventional machining microfinish comparator:
Twenty-two replicated machined surface finish
specimens with examples of six different machining
processes calibrated in microinches (μ).
• Supplied in a leatherette case with instructions
& engineering data.
• Machined surface microfinish comparator.
DESCRIPTION
PART NO.
PRICE
S-22
30-690-2
$101.45
S-22 Certified
30-691-0
382.05
Type of Process
Finish Range Gaged (μ)
Lapping
2, 4, 8
Blanchard Grinding
16, 32
Conventional Grinding
8, 16, 32, 63
Shape Turning
32, 63, 125, 250, 500
Milling
63, 125, 250, 500
Profiling
63, 125, 250, 500
30-690-2
