Page 169 Penn Tool Co. Precision Tooling Buyer's Guide 2019
P. 169
167
Additional Accessories
DESCRIPTION
PART NO.
PRICE
Setting Pin
13-325-6
$6.60
Certified Reference
13-333-0
375.10
DESCRIPTION
PART NO.
PRICE
Parallel Chisel Probe
For gaging sharp edges or small O.D’s where
probe is perpendicular (90°- to 270° position)
to axis of traverse.
90° sapphire chisel, .0004"/10μm Radius
13-328-0
$847.00
DESCRIPTION
PART NO.
PRICE
Groove Bottom Probe**
For measuring the bottom of grooves, recesses
and small holes to depths of .25"/6.35 mm.
90° conical diamond stylus, .0004"/10μm Radius
13-332-2
$898.05
(**) Can only be used in 180° position with the Pocket Surf supported
in a height stand or other fixture
DESCRIPTION
PART NO.
PRICE
Small Bore Probe
For gaging small bores .125"/3.2 mm minimum
I.D. and a depth of .75"/19 mm
90° conical diamond stylus, .0004"/10μm Radius
13-329-8
$898.05
Small Bore Probe**
For gaging small bores .125"/3.2 mm minimum
I.D. and a depth of .75"/19 mm
90° conical diamond stylus, .0002"/5μm Radius
13-331-4
898.05
(**) Can only be used in 180° position with the Pocket Surf supported
in a height stand or other fixture
DESCRIPTION
PART NO.
PRICE
Transverse Chisel Probe
For gaging sharp edges or small O.D.’s where
Probe is aligned with axis of traverse (closed).
90° sapphire chisel, .0004"/10μm Radius
13-327-2
$847.00
DESCRIPTION
PART NO.
PRICE
General Purpose Probe
For most surface roughness applications
90° conical diamond stylus, .0004"/10μm Radius
13-326-4
$677.60
General Purpose Probe
For most surface roughness applications
90° conical diamond stylus, .0002"/5μm Radius
13-330-6
677.60
Portable
Hardness Tester
State of the art, digital hardness
tester designed to test large,
hard metal parts
• Automatic conversion to these
hardness scales: Rockwell B and C, Brinell,
Vicker and Shore & Leeb.
• Measuring ranges:
20-68 HRC, 13-100 HRB, 20-894 HB,
45-950 HV, 14-100 HSD, 10-900 HLD
• Accuracy: ±1 HRC
• Easy-to-use keypad operation.
• Large LCD display with back light.
• Low battery indicator.
• Specifications:
Accuracy: ±0.5% (Referred to L = 800, ±6L units)
L = Leeb
Measuring Range: 200-960 HL
Materials: Steel & cast steel, alloy tool steel,
stainless steel, gray cast iron, spheroidal
iron, cast aluminum
Operating Temp.: 5 to 104° F
Battery Type: 4-AA Batteries
• Memory and output via RS232.
• Dimensions: 10" L x 12" H x 5 Depth
"
• Weight: 11 Lbs.
• Includes: Unit, impact device "D", calibrated test block, battery set,
cleaning brush, operation manual and carrying case.
DESCRIPTION
PART NO.
PRICE
Portable Hardness Tester
15-140-7
$1,471.80
Repl. Batteries - AA (Pkg. of 4)
60-188-0
3.80
15-140-7
Portable Steel
Hardness Tester
Equivalent to Rockwell C Scale
• A hand-held impact indenter drives a ⁄ " diameter
1
16
carbide ball into the sample with a calibrated impact.
The impression diameter is read directly with
a microscope containing a calibrated reticle.
• Range: 20 to 65 HRC
• Accuracy: ±1.5 points
• Includes:
— Hand-held impact indenter
— Illuminated 60X measuring microscope
(Illuminated system is a Mini Maglite®
coupled to a fiber optic light pipe)
— 2 AAA batteries
— Test block
— Hardness conversion chart
— Instructions
— Carrying case
DESCRIPTION
PART NO.
PRICE
Portable Steel Hardness Tester
52-342-3
$1,064.75
ete
r
mp
act.
52-342-3
Additional Accessories
DESCRIPTION
PART NO.
PRICE
Setting Pin
13-325-6
$6.60
Certified Reference
13-333-0
375.10
DESCRIPTION
PART NO.
PRICE
Parallel Chisel Probe
For gaging sharp edges or small O.D’s where
probe is perpendicular (90°- to 270° position)
to axis of traverse.
90° sapphire chisel, .0004"/10μm Radius
13-328-0
$847.00
DESCRIPTION
PART NO.
PRICE
Groove Bottom Probe**
For measuring the bottom of grooves, recesses
and small holes to depths of .25"/6.35 mm.
90° conical diamond stylus, .0004"/10μm Radius
13-332-2
$898.05
(**) Can only be used in 180° position with the Pocket Surf supported
in a height stand or other fixture
DESCRIPTION
PART NO.
PRICE
Small Bore Probe
For gaging small bores .125"/3.2 mm minimum
I.D. and a depth of .75"/19 mm
90° conical diamond stylus, .0004"/10μm Radius
13-329-8
$898.05
Small Bore Probe**
For gaging small bores .125"/3.2 mm minimum
I.D. and a depth of .75"/19 mm
90° conical diamond stylus, .0002"/5μm Radius
13-331-4
898.05
(**) Can only be used in 180° position with the Pocket Surf supported
in a height stand or other fixture
DESCRIPTION
PART NO.
PRICE
Transverse Chisel Probe
For gaging sharp edges or small O.D.’s where
Probe is aligned with axis of traverse (closed).
90° sapphire chisel, .0004"/10μm Radius
13-327-2
$847.00
DESCRIPTION
PART NO.
PRICE
General Purpose Probe
For most surface roughness applications
90° conical diamond stylus, .0004"/10μm Radius
13-326-4
$677.60
General Purpose Probe
For most surface roughness applications
90° conical diamond stylus, .0002"/5μm Radius
13-330-6
677.60
Portable
Hardness Tester
State of the art, digital hardness
tester designed to test large,
hard metal parts
• Automatic conversion to these
hardness scales: Rockwell B and C, Brinell,
Vicker and Shore & Leeb.
• Measuring ranges:
20-68 HRC, 13-100 HRB, 20-894 HB,
45-950 HV, 14-100 HSD, 10-900 HLD
• Accuracy: ±1 HRC
• Easy-to-use keypad operation.
• Large LCD display with back light.
• Low battery indicator.
• Specifications:
Accuracy: ±0.5% (Referred to L = 800, ±6L units)
L = Leeb
Measuring Range: 200-960 HL
Materials: Steel & cast steel, alloy tool steel,
stainless steel, gray cast iron, spheroidal
iron, cast aluminum
Operating Temp.: 5 to 104° F
Battery Type: 4-AA Batteries
• Memory and output via RS232.
• Dimensions: 10" L x 12" H x 5 Depth
"
• Weight: 11 Lbs.
• Includes: Unit, impact device "D", calibrated test block, battery set,
cleaning brush, operation manual and carrying case.
DESCRIPTION
PART NO.
PRICE
Portable Hardness Tester
15-140-7
$1,471.80
Repl. Batteries - AA (Pkg. of 4)
60-188-0
3.80
15-140-7
Portable Steel
Hardness Tester
Equivalent to Rockwell C Scale
• A hand-held impact indenter drives a ⁄ " diameter
1
16
carbide ball into the sample with a calibrated impact.
The impression diameter is read directly with
a microscope containing a calibrated reticle.
• Range: 20 to 65 HRC
• Accuracy: ±1.5 points
• Includes:
— Hand-held impact indenter
— Illuminated 60X measuring microscope
(Illuminated system is a Mini Maglite®
coupled to a fiber optic light pipe)
— 2 AAA batteries
— Test block
— Hardness conversion chart
— Instructions
— Carrying case
DESCRIPTION
PART NO.
PRICE
Portable Steel Hardness Tester
52-342-3
$1,064.75
ete
r
mp
act.
52-342-3
