Page 32 Penn Tool Co. Precision Tooling Buyer's Guide 2019
P. 32
30
Precision Indicator Holders
• Quick, easy & accurate adjustment, 0" to 7" and
up to 12" radius with optional extension.
• Reversible holder slides full length of arm and allows
fine adjustment to keep indicator on center line.
• Use with extension arm to quickly and
accurately set table.
• 20-840-5 1" high vertical arm for setups with
little vertical clearance for
5
⁄
32
" stems.
• 20-841-3 2" high vertical arm for setups
with more clearance allows better visibility
of indicator for
5
⁄
32
" stems.
HEIGHT TYPE
PART NO.
PRICE
1"
Inch
20-840-5
$90.85
2"
Inch
20-841-3
90.85
Optional Extension Arm
DESCRIPTION
PART NO.
PRICE
8" Extension
20-836-3
$19.10
12" Extension
20-837-1
20.25
Indicators
not included
MADE IN USA
Sweep-It
• Attitude of the indicator does not
change across the entire range.
• Eliminates the need to reposition
the indicator and insures concentricity
of progressive measurements.
• Directly adapts to dovetailed
5
⁄ " shank of indicator.
32
SHANK
RANGE
PART NO.
PRICE
3
⁄ "
8
0 - 8"
20-757-1
$94.85
3
⁄ "
8
0 - 12"
20-758-9
116.80
Indicator
not included
MADE IN USA
12-364-6
Zero-Set for Test Indicator
• "Zero-Set" is specially designed for test indicators with dovetails
and functions as a quick and practical work positioning device.
• Setting up a workpiece before machining, or aligning the center
of a round workpiece in relation to the cutting head,
takes virtually no time with "Zero-Set."
• Attach "Zero-Set" directly to the collet, then zero-in the work
position by reading the test indicator.
• The hardened clamping post consists of three O.D.’s, from top, ⁄ ",
1 4
3
⁄ " and ⁄ " and has hardness of approximately 58 to 60 RC.
8
1 2
• The illustration indicates the alignment of a workpiece in relation
to the cutting head.
• It reaches anywhere within a 8" diameter and fine-adjusts
about ⁄ " with a large knurled knob.
3 8
• "Zero-Set" can also be adapted to transfer stands for closer
control of the test indicator (in the horizontal direction).
• "Zero-Set" attachment allows for the placement of any test
indicator equipped with dovetails or ⁄ " posts in a multitude
1 4
of positions and angles up to 90° on either side, bending both
forward and backward.
DESCRIPTION
PART NO.
PRICE
Zero-Set Indicator Holder
12-364-6
$259.60
Holder Attachment
12-365-3
138.95
Indicator
not included
20-910-6
Spindle Squares™
A simple solution to squaring your machine. Just zero indicators
on flat surface (like a granite plate), install in milling machine
spindle, bring the spindle down to the table and adjust
the head until both indicators read the same.
•
3
⁄ " shank.
8
• Fully assembled with indicators mounted
and ready for use.
• No more tramming or split reading,
compensating for loose, worn gears or mirrors.
• Can also be used with a sine bar or
protractor to set angle.
• Constructed of steel with precision ground
contact points for durability and accuracy
• Mini inch model designed for mini-milling or table-top
machines and comes in leather pouch.
• All other models furnished in fitted case.
DISTANCE
BETWEEN
PART
DESCRIPTION
GRADUATION
CONTACT
POINTS
NUMBER
PRICE
Standard Inch Model
0.001"
4"
20-910-6
$203.90
Tool Grade Inch Model
0.0005"
4"
91-332-7
218.60
Mini Inch Model
0.0005"
3"
91-331-9
213.40
Metric Model
0.01 mm
101 mm
91-330-1
209.00
Precision Indicator Holders
• Quick, easy & accurate adjustment, 0" to 7" and
up to 12" radius with optional extension.
• Reversible holder slides full length of arm and allows
fine adjustment to keep indicator on center line.
• Use with extension arm to quickly and
accurately set table.
• 20-840-5 1" high vertical arm for setups with
little vertical clearance for
5
⁄
32
" stems.
• 20-841-3 2" high vertical arm for setups
with more clearance allows better visibility
of indicator for
5
⁄
32
" stems.
HEIGHT TYPE
PART NO.
PRICE
1"
Inch
20-840-5
$90.85
2"
Inch
20-841-3
90.85
Optional Extension Arm
DESCRIPTION
PART NO.
PRICE
8" Extension
20-836-3
$19.10
12" Extension
20-837-1
20.25
Indicators
not included
MADE IN USA
Sweep-It
• Attitude of the indicator does not
change across the entire range.
• Eliminates the need to reposition
the indicator and insures concentricity
of progressive measurements.
• Directly adapts to dovetailed
5
⁄ " shank of indicator.
32
SHANK
RANGE
PART NO.
PRICE
3
⁄ "
8
0 - 8"
20-757-1
$94.85
3
⁄ "
8
0 - 12"
20-758-9
116.80
Indicator
not included
MADE IN USA
12-364-6
Zero-Set for Test Indicator
• "Zero-Set" is specially designed for test indicators with dovetails
and functions as a quick and practical work positioning device.
• Setting up a workpiece before machining, or aligning the center
of a round workpiece in relation to the cutting head,
takes virtually no time with "Zero-Set."
• Attach "Zero-Set" directly to the collet, then zero-in the work
position by reading the test indicator.
• The hardened clamping post consists of three O.D.’s, from top, ⁄ ",
1 4
3
⁄ " and ⁄ " and has hardness of approximately 58 to 60 RC.
8
1 2
• The illustration indicates the alignment of a workpiece in relation
to the cutting head.
• It reaches anywhere within a 8" diameter and fine-adjusts
about ⁄ " with a large knurled knob.
3 8
• "Zero-Set" can also be adapted to transfer stands for closer
control of the test indicator (in the horizontal direction).
• "Zero-Set" attachment allows for the placement of any test
indicator equipped with dovetails or ⁄ " posts in a multitude
1 4
of positions and angles up to 90° on either side, bending both
forward and backward.
DESCRIPTION
PART NO.
PRICE
Zero-Set Indicator Holder
12-364-6
$259.60
Holder Attachment
12-365-3
138.95
Indicator
not included
20-910-6
Spindle Squares™
A simple solution to squaring your machine. Just zero indicators
on flat surface (like a granite plate), install in milling machine
spindle, bring the spindle down to the table and adjust
the head until both indicators read the same.
•
3
⁄ " shank.
8
• Fully assembled with indicators mounted
and ready for use.
• No more tramming or split reading,
compensating for loose, worn gears or mirrors.
• Can also be used with a sine bar or
protractor to set angle.
• Constructed of steel with precision ground
contact points for durability and accuracy
• Mini inch model designed for mini-milling or table-top
machines and comes in leather pouch.
• All other models furnished in fitted case.
DISTANCE
BETWEEN
PART
DESCRIPTION
GRADUATION
CONTACT
POINTS
NUMBER
PRICE
Standard Inch Model
0.001"
4"
20-910-6
$203.90
Tool Grade Inch Model
0.0005"
4"
91-332-7
218.60
Mini Inch Model
0.0005"
3"
91-331-9
213.40
Metric Model
0.01 mm
101 mm
91-330-1
209.00
