Page 128 Penn Tool Co. Precision Tooling 2014 Sale Catalog
P. 128
Model
No.
X-100
X-200
X-TSVA
WCS-001
Y-100
Y-200
Y-300
Y-400
Y-TSVA
Z-100
Y-20
Magnification
20X
50X
20X
50X
100X
200X
10X
20X Eyepiece for "Z" Series
Field of
View
.270"
.105"
.382"
.158"
.080"
.038"
.760"
Working
Distance
.27"
.2086"
2.598"
1.078"
0.255"
0.060"
6.250"
Price
Each
$895.00
895.00
485.00
68.00
$1450.00
1450.00
1550.00
1550.00
595.00
$1425.00
295.00
Video Adapter
Wood Case for Either Model
Video Adapter for "Y" & "Z"
•
The most minute spindle run-out can be compensated for both the X & Y & Z Series
Centering Microscopes the X Series uses the popular (3) master centering screw
method where the reticle floats between the centering screws just below eyepiece
of the microscope.
•
The Y & Z Series Centering Microscope have a "Prismatic" centering device where
only two screws are needed for especially simple and fast centering to compensate
for spindle run-out. The Prismatic setting on the Y &Z Series has the advantage of
not changing the settings of one axis while you are adjusting the other axis, as both
settings are entirely independent of each other. Both methods can be quickly
mastered. Special instructions come with the units. It is an easy matter to adjust the
microscope for perfect centering every time.
• SHANK: 3” long, 1/2” diameter, hardened and ground.
• EYETUBE: 3 1/2” long at 45° angle to the center of the body.
• IMAGE: Optically correct. Right side up not inverted.
• EYEPIECE: Color coated and achromatic Kelner type.
Specifications:
CENTERING MICROSCOPES
Illuminator &
Transformer
For All Models
No. CMI-CMT
$295.00
"Z" & "Y"
Type
"X"
Type
The Fowler/Wyler Surface Plate Kit is a full-featured and economical kit
designed specifically for testing surface plate flatness quickly and accurately.
• Includes 2 Wyler levels
• Wyler Bluemeter Basic
• Wyler Levelsoft software
• Meter to level cables
• USB computer cable
BlueSYSTEM FOR
SURFACE PLATE FLATNESS TESTING
Wyler Infra-Red Zapper
allows
for remote measurement taking
to avoid inaccuracies caused by
vibration and other contact-in-
duced abberations.
120 Volt Power Supply
for con-
venient non-battery power.
Accessories:
Levelsoft PRO Software
is a well known, By using
user-friendly measuring and calibra- be used in a number of combinations and
tion software for checking flatness ge- configurations (e.g. differential measurement
ometry measurement (Measuring - and with two instruments), for measurement of
setting plates, geometry of machine straightness of lines, the measurement of
tools etc.). It is available for use with guide ways with twist or the flatness of large
the MINILEVEL NT, LEVELTRONIC NT, and small surfaces.
NivelSWISS and BlueSYSTEM series of
WYLER instruments.
Levelsoft PRO
the instruments may
Model
54-895-250
54-895-010
54-895-999
54-895-779-1
Description
Wyler Surface Plate Kit with BlueMeter Basic and Software
120 Volt Power Supply
Infra-Red Zapper
Levelsoft PRO Software
Price
$28,500.00
Simple to operate. For the initial setting, i.e., to the nearest degree, depress the spring
loaded micrometer drum to disengage the drive to the main scale. Coarse setting is
then made by rotating the spirit level by hand. Re-engage drive and rotate micrometer
drum to obtain one final setting.
•
Although smaller and more compact than
most Clinometers, it still provides the same
accuracy.
•
Overall height 4.562"; base length 6";
base width 1.375". Weight is 3 lbs. 9 oz.
•
Main circle: 1 division = 1 degree.
Micrometer: 1 division = 1 minute.
Accuracy: 1-1⁄2 minutes.
•
Base hardened, ground flat with a
longitudinal prismatic vee which allows it
to be easily placed on flat & cylindrical
surfaces.
•
Includes fitted wood case.
CLINOMETER
•
Circular scale, observed through
viewing window, is marked 0-180-0
at one degree intervals and figured
every 10 degrees.
•
A spirit level vial, is attached to the
adjusting collar.
•
Scale is subdivided by means of an
external micrometer graduated in
minutes with a sensitivity of 1 division
= 1 min. , 0.003"/10" (.3mm/m). Easy
estimation to 30 seconds can be
achieved. Drum graduated in
minutes; figured every 5 minutes.
MODEL No.
53-635-500
$3295.00
Precise
10X POCKET OPTICAL COMPARATOR SET
•
Widely used by machinists, toolmaker,
and inspectors for checking angles,
diameters, radii, thread pitches, hole sizes,
etc.
•
The scales are photo etched into glass
reticle for easy reading.
•
Reticle screw-in mounting are
interchangeable.
•
9 piece/set includes: 1 pc.
Comparator and 8 pc. Reticle.
•
Lens diameter: 21mm 1" diameters
reticles 1#-13# can be used.
•
Body height 2".
SET No.
303-2130
$84.95
"X" & "Y"
Standard Reticle
90º Crosshair
.0025" Division
Precise
45X CENTERING SCOPE
MODEL No.
40-149-7
$344.00
•
Enable operator to locate work for drilling,
boring, etc., on vertical milling machines, jig
bores or drill presses.
•
Edges, lines or punch marks on work piece
can be quickly located or centered relative to
the axis of the machine, locate lines.
•
To use, simply place instrument in machine,
locate lines on work to match crosshair lines
in viewing aperture.
•
Knurled sleeve on lower end of scope is
turned to compensate for misalignment.
•
The work layout intersection is now in the
exact center of the spindle axis, ready for
cutting tool.
•
True position accuracy ±.0001".
•
Crosshair reticle for use as reference of X and
Y axis.
•
Eyepiece angle 60º.
•
Field of view 1/8". Working distance 1" from
lens.
Model
No.
527
IEL-480
249
Power
"X"
5X
5X & 7X
Working
Distance
2"
1" & 2"
Price
Each
$ 7.95
9.95
$14.95 Includes (1) Each 3.5X, 5X & 10X
3 Piece Set
Precise
EYE LOUPES
•
For toolmakers, jewelers, instrument
assemblers, etc.
•
Lenses made of polished optical glass
•
Lens diameter: 1"
*Double
Lens
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 128
No.
X-100
X-200
X-TSVA
WCS-001
Y-100
Y-200
Y-300
Y-400
Y-TSVA
Z-100
Y-20
Magnification
20X
50X
20X
50X
100X
200X
10X
20X Eyepiece for "Z" Series
Field of
View
.270"
.105"
.382"
.158"
.080"
.038"
.760"
Working
Distance
.27"
.2086"
2.598"
1.078"
0.255"
0.060"
6.250"
Price
Each
$895.00
895.00
485.00
68.00
$1450.00
1450.00
1550.00
1550.00
595.00
$1425.00
295.00
Video Adapter
Wood Case for Either Model
Video Adapter for "Y" & "Z"
•
The most minute spindle run-out can be compensated for both the X & Y & Z Series
Centering Microscopes the X Series uses the popular (3) master centering screw
method where the reticle floats between the centering screws just below eyepiece
of the microscope.
•
The Y & Z Series Centering Microscope have a "Prismatic" centering device where
only two screws are needed for especially simple and fast centering to compensate
for spindle run-out. The Prismatic setting on the Y &Z Series has the advantage of
not changing the settings of one axis while you are adjusting the other axis, as both
settings are entirely independent of each other. Both methods can be quickly
mastered. Special instructions come with the units. It is an easy matter to adjust the
microscope for perfect centering every time.
• SHANK: 3” long, 1/2” diameter, hardened and ground.
• EYETUBE: 3 1/2” long at 45° angle to the center of the body.
• IMAGE: Optically correct. Right side up not inverted.
• EYEPIECE: Color coated and achromatic Kelner type.
Specifications:
CENTERING MICROSCOPES
Illuminator &
Transformer
For All Models
No. CMI-CMT
$295.00
"Z" & "Y"
Type
"X"
Type
The Fowler/Wyler Surface Plate Kit is a full-featured and economical kit
designed specifically for testing surface plate flatness quickly and accurately.
• Includes 2 Wyler levels
• Wyler Bluemeter Basic
• Wyler Levelsoft software
• Meter to level cables
• USB computer cable
BlueSYSTEM FOR
SURFACE PLATE FLATNESS TESTING
Wyler Infra-Red Zapper
allows
for remote measurement taking
to avoid inaccuracies caused by
vibration and other contact-in-
duced abberations.
120 Volt Power Supply
for con-
venient non-battery power.
Accessories:
Levelsoft PRO Software
is a well known, By using
user-friendly measuring and calibra- be used in a number of combinations and
tion software for checking flatness ge- configurations (e.g. differential measurement
ometry measurement (Measuring - and with two instruments), for measurement of
setting plates, geometry of machine straightness of lines, the measurement of
tools etc.). It is available for use with guide ways with twist or the flatness of large
the MINILEVEL NT, LEVELTRONIC NT, and small surfaces.
NivelSWISS and BlueSYSTEM series of
WYLER instruments.
Levelsoft PRO
the instruments may
Model
54-895-250
54-895-010
54-895-999
54-895-779-1
Description
Wyler Surface Plate Kit with BlueMeter Basic and Software
120 Volt Power Supply
Infra-Red Zapper
Levelsoft PRO Software
Price
$28,500.00
Simple to operate. For the initial setting, i.e., to the nearest degree, depress the spring
loaded micrometer drum to disengage the drive to the main scale. Coarse setting is
then made by rotating the spirit level by hand. Re-engage drive and rotate micrometer
drum to obtain one final setting.
•
Although smaller and more compact than
most Clinometers, it still provides the same
accuracy.
•
Overall height 4.562"; base length 6";
base width 1.375". Weight is 3 lbs. 9 oz.
•
Main circle: 1 division = 1 degree.
Micrometer: 1 division = 1 minute.
Accuracy: 1-1⁄2 minutes.
•
Base hardened, ground flat with a
longitudinal prismatic vee which allows it
to be easily placed on flat & cylindrical
surfaces.
•
Includes fitted wood case.
CLINOMETER
•
Circular scale, observed through
viewing window, is marked 0-180-0
at one degree intervals and figured
every 10 degrees.
•
A spirit level vial, is attached to the
adjusting collar.
•
Scale is subdivided by means of an
external micrometer graduated in
minutes with a sensitivity of 1 division
= 1 min. , 0.003"/10" (.3mm/m). Easy
estimation to 30 seconds can be
achieved. Drum graduated in
minutes; figured every 5 minutes.
MODEL No.
53-635-500
$3295.00
Precise
10X POCKET OPTICAL COMPARATOR SET
•
Widely used by machinists, toolmaker,
and inspectors for checking angles,
diameters, radii, thread pitches, hole sizes,
etc.
•
The scales are photo etched into glass
reticle for easy reading.
•
Reticle screw-in mounting are
interchangeable.
•
9 piece/set includes: 1 pc.
Comparator and 8 pc. Reticle.
•
Lens diameter: 21mm 1" diameters
reticles 1#-13# can be used.
•
Body height 2".
SET No.
303-2130
$84.95
"X" & "Y"
Standard Reticle
90º Crosshair
.0025" Division
Precise
45X CENTERING SCOPE
MODEL No.
40-149-7
$344.00
•
Enable operator to locate work for drilling,
boring, etc., on vertical milling machines, jig
bores or drill presses.
•
Edges, lines or punch marks on work piece
can be quickly located or centered relative to
the axis of the machine, locate lines.
•
To use, simply place instrument in machine,
locate lines on work to match crosshair lines
in viewing aperture.
•
Knurled sleeve on lower end of scope is
turned to compensate for misalignment.
•
The work layout intersection is now in the
exact center of the spindle axis, ready for
cutting tool.
•
True position accuracy ±.0001".
•
Crosshair reticle for use as reference of X and
Y axis.
•
Eyepiece angle 60º.
•
Field of view 1/8". Working distance 1" from
lens.
Model
No.
527
IEL-480
249
Power
"X"
5X
5X & 7X
Working
Distance
2"
1" & 2"
Price
Each
$ 7.95
9.95
$14.95 Includes (1) Each 3.5X, 5X & 10X
3 Piece Set
Precise
EYE LOUPES
•
For toolmakers, jewelers, instrument
assemblers, etc.
•
Lenses made of polished optical glass
•
Lens diameter: 1"
*Double
Lens
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 128
