Page 129 Penn Tool Co. Precision Tooling 2014 Sale Catalog
P. 129
•
Titan Centering Microscopes have an upright image, optically correct from left to
right so that the operator sees the workpiece with the microscope the same as
without it, mistakes due to transposing or converting are eliminated.
•
The X & Y & Z Series Centering Microscopes all come with hardened and ground
1/2" x 3" diameter shanks so that they are adaptable to all machines through the
use of collets. It is suggested if it will be used continuously in one machine that
it be fitted with its own collets.
•
The most minute spindle run-out can be compensated for both the X & Y &Z Series
Centering Microscopes and the X Series uses the popular (3) master centering
screw method where the reticle floats between the centering screws just below
eyepiece of the microscope. The Y & Z Series have a "Prismatic" centering device
where only two screws are needed for especially simple and fast centering to
compensate for spindle run out. The prismatic setting on the Y & Z Series has the
advantage of not changing the settings of one axis while you are adjusting the other
axis, as both settings are entirely independent of each other. Both methods can be
quickly mastered. Special instructions come with the units. It is an easy matter to
adjust the microscope for perfect centering every time.
CENTERING MICROSCOPES
Reticle C
Available as extra
cost option
Optional:
20X Eyepiece
Reticle A
Reticle B
Available in inch or metric
(can be ordered as stan-
dard in Model Y-1, Y-II and
Y-III in inch. Only has to be
ordered as extra for Mod-
els Z-I and Y-IV)
Type:
Y & Z
Shipped with Reticle "A" unless
Reticle "B" is specified. Only
available in inch Divisions
Optional for all Models
Type:
X
Doubles
Magnification
VIDEO-BORESCOPE
Reach Inaccessible Areas Quickly and Easily!
•
High resolution full color image.
•
9mm diameter fits most small access
applications.
•
Adjustable LED lighting.
•
Detachable, wireless monitor 2.4:
LCD for remote viewing.
•
Standard one meter(39") lengths with
option extension cable.
•
Runs on 4 AA batteries.
MODEL No.
13290
$295.00
With Fitted Case
Optional:
3 Foot Extension Cable*
No. 13291
$20.50
* When using extension, must have
entrance diameter of .710"
Eliminate Costly "DNC" Systems by Tranfering "G" Code
From CNC Control to PC via PDA
CncGcoder HD
®
• You can use the CncGcoder® HD to make quick
program edits right in front of your CNC. The built-
in CNC style keyboard makes it easy to change
speeds, feeds, or even program numbers on the
shop floor. You can make your changes and send
the new program to the cnc in seconds. (only files
less than 30,000 characters can be edited in the
CncGcoder)
• The unit is liquid, dust and shock resistant. It will
withstand a splash of oil or a few chips. It will even
tolerate the occasional dents and dings common in
any shop.
• Never have difficulty finding the right program
again. File management has been simplified. The
G-Code programs can be saved with descriptive
manes as PC formatted files. These files can be
organized into any number of folders or directories.
• The unit also has an integrated SD slot for limitless
memory capabilities. Use an SD memory card to
store and organize all of your G-Code programs, or
use different cards for different machines.
• The CncGcoder HD is equipped with a large capacity
rechargeable battery for hours of continuous use
between charges.
• Never need to worry about available memory
on your CNC again. Store your G-Code
programs on your PC and then use your
CncGcoder HD to transfer the programs to
your CNC when needed. (up to 1 MB per
transfer is supported)
• By displaying the program on the unit's screen,
you can be sure it is correct the first time. No time
is wasted running to and from the computer to
check what is being transferred. You can walk up to
the machine and start communications.
No. 003 (Shown)
USB
Port
Description
HDX Super CncCoder with
NEW
Extreme Duty Durable
Cable and Enhanced
USB
Port
Extreme Duty Durable Cable with
USB
Port
for older HD model upgrade
Model
GNC-003
GNC-002
Price
$1095.00
180.00
ILLUMINATED CODDINGTON MAGNIFIER
Features:
•
Solves the problem of adequate illumination for
high-power magnification.
•
Designed to allow the viewed area to be flood with
light through the lens itself.
•
Operated by 2 AAA batteries (not included).
MODEL No.
81-34-34
Reg. $40.90
$29.95
Specifications:
Focal distance . . . . 1"
Power . . . . . . . . 10X
ILLUMINATED 10X JEWELER LOUPES
•
Built-in band of six LED lights.
•
Emits a cool bright light.
•
Direct illumination eliminates
shadows.
•
Leather storage case included.
•
Ultraviolet light.
•
Essential for identifying fluorescent
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 129
Model
29-610
29-615
Description
10X Illuminated Loupe
10X Illuminated Loupe with Ultraviolet Lighting
Price
$29.95
39.95
Description
20X Eye Piece
This makes the divisions of the reticle easier
to read and doubles the magnification
Fitted wood Case for all models
Model
OEX-002
WCS-001
Price
$295.00
$ 75.00
Model
No.
XCS-004
XCS-005
YCS-007
YCS-008
YCS-009
YCS-010
ZCS-006
Magnification
20X
50X
20X
50X
100X
200X
10X
Field
of View
.270"
.105"
.382"
.158"
.080"
.038"
.760"
Working
Distance
2.086"
.8267"
2.60"
1.078"
.255"
.060"
6.25"
Type
X-1
X-2
Y-1
Y-2
Y-3
Y-4
Z-1
Price
Each
$ 895.00
895.00
$1450.00
1450.00
1550.00
1550.00
1425.00
Titan Centering Microscopes have an upright image, optically correct from left to
right so that the operator sees the workpiece with the microscope the same as
without it, mistakes due to transposing or converting are eliminated.
•
The X & Y & Z Series Centering Microscopes all come with hardened and ground
1/2" x 3" diameter shanks so that they are adaptable to all machines through the
use of collets. It is suggested if it will be used continuously in one machine that
it be fitted with its own collets.
•
The most minute spindle run-out can be compensated for both the X & Y &Z Series
Centering Microscopes and the X Series uses the popular (3) master centering
screw method where the reticle floats between the centering screws just below
eyepiece of the microscope. The Y & Z Series have a "Prismatic" centering device
where only two screws are needed for especially simple and fast centering to
compensate for spindle run out. The prismatic setting on the Y & Z Series has the
advantage of not changing the settings of one axis while you are adjusting the other
axis, as both settings are entirely independent of each other. Both methods can be
quickly mastered. Special instructions come with the units. It is an easy matter to
adjust the microscope for perfect centering every time.
CENTERING MICROSCOPES
Reticle C
Available as extra
cost option
Optional:
20X Eyepiece
Reticle A
Reticle B
Available in inch or metric
(can be ordered as stan-
dard in Model Y-1, Y-II and
Y-III in inch. Only has to be
ordered as extra for Mod-
els Z-I and Y-IV)
Type:
Y & Z
Shipped with Reticle "A" unless
Reticle "B" is specified. Only
available in inch Divisions
Optional for all Models
Type:
X
Doubles
Magnification
VIDEO-BORESCOPE
Reach Inaccessible Areas Quickly and Easily!
•
High resolution full color image.
•
9mm diameter fits most small access
applications.
•
Adjustable LED lighting.
•
Detachable, wireless monitor 2.4:
LCD for remote viewing.
•
Standard one meter(39") lengths with
option extension cable.
•
Runs on 4 AA batteries.
MODEL No.
13290
$295.00
With Fitted Case
Optional:
3 Foot Extension Cable*
No. 13291
$20.50
* When using extension, must have
entrance diameter of .710"
Eliminate Costly "DNC" Systems by Tranfering "G" Code
From CNC Control to PC via PDA
CncGcoder HD
®
• You can use the CncGcoder® HD to make quick
program edits right in front of your CNC. The built-
in CNC style keyboard makes it easy to change
speeds, feeds, or even program numbers on the
shop floor. You can make your changes and send
the new program to the cnc in seconds. (only files
less than 30,000 characters can be edited in the
CncGcoder)
• The unit is liquid, dust and shock resistant. It will
withstand a splash of oil or a few chips. It will even
tolerate the occasional dents and dings common in
any shop.
• Never have difficulty finding the right program
again. File management has been simplified. The
G-Code programs can be saved with descriptive
manes as PC formatted files. These files can be
organized into any number of folders or directories.
• The unit also has an integrated SD slot for limitless
memory capabilities. Use an SD memory card to
store and organize all of your G-Code programs, or
use different cards for different machines.
• The CncGcoder HD is equipped with a large capacity
rechargeable battery for hours of continuous use
between charges.
• Never need to worry about available memory
on your CNC again. Store your G-Code
programs on your PC and then use your
CncGcoder HD to transfer the programs to
your CNC when needed. (up to 1 MB per
transfer is supported)
• By displaying the program on the unit's screen,
you can be sure it is correct the first time. No time
is wasted running to and from the computer to
check what is being transferred. You can walk up to
the machine and start communications.
No. 003 (Shown)
USB
Port
Description
HDX Super CncCoder with
NEW
Extreme Duty Durable
Cable and Enhanced
USB
Port
Extreme Duty Durable Cable with
USB
Port
for older HD model upgrade
Model
GNC-003
GNC-002
Price
$1095.00
180.00
ILLUMINATED CODDINGTON MAGNIFIER
Features:
•
Solves the problem of adequate illumination for
high-power magnification.
•
Designed to allow the viewed area to be flood with
light through the lens itself.
•
Operated by 2 AAA batteries (not included).
MODEL No.
81-34-34
Reg. $40.90
$29.95
Specifications:
Focal distance . . . . 1"
Power . . . . . . . . 10X
ILLUMINATED 10X JEWELER LOUPES
•
Built-in band of six LED lights.
•
Emits a cool bright light.
•
Direct illumination eliminates
shadows.
•
Leather storage case included.
•
Ultraviolet light.
•
Essential for identifying fluorescent
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 129
Model
29-610
29-615
Description
10X Illuminated Loupe
10X Illuminated Loupe with Ultraviolet Lighting
Price
$29.95
39.95
Description
20X Eye Piece
This makes the divisions of the reticle easier
to read and doubles the magnification
Fitted wood Case for all models
Model
OEX-002
WCS-001
Price
$295.00
$ 75.00
Model
No.
XCS-004
XCS-005
YCS-007
YCS-008
YCS-009
YCS-010
ZCS-006
Magnification
20X
50X
20X
50X
100X
200X
10X
Field
of View
.270"
.105"
.382"
.158"
.080"
.038"
.760"
Working
Distance
2.086"
.8267"
2.60"
1.078"
.255"
.060"
6.25"
Type
X-1
X-2
Y-1
Y-2
Y-3
Y-4
Z-1
Price
Each
$ 895.00
895.00
$1450.00
1450.00
1550.00
1550.00
1425.00
