Page 181 Penn Tool Co. Precision Tooling 2014 Sale Catalog
P. 181
• The magnetic section on • Converts your surface
one side is sepparated so
as to adapt itself to the
surface of the instru-
ment, tool or part to be
held.
•The opposite side at- •Top & bottom parallel
tracts itself to any metal
surface on any machine. • 3-1/2” long x 2-1/2”
gage into a magnetic
unit and also be used as
a grinding chuck for
small grinding opera-
tions.
within .001”.
wide x 7/8” high.
MAGNETIC WELDING LINK
MAGNETIC
TOOLMAKER’S CHUCKS
Precision Ground
•Top, bottom and end magnetize simultaneously.
• All models precision ground flat, square and parallel
to an overall accuracy of .0005”.
• Bottom surface relieved .125” to minimize loss of
magnetism.
•
Model MTC-300
has 3/16” x 1/16” fine pole construc-
tion for holding small or thin parts and removable side
and end rails.
• Designed to enable fast and accurate holding of
ferrous metals for welding and assembly jobs.
•The Quick Clamp will hold sheet and tube at angles
of 180°, 90°, 75°, 60°, 45°, & 30°.
•The three body holes enable this new magnetic tool
to be built into jigs or hung up when not in use.
MAGNETIC QUICK CLAMP
Dim:
Base: 3-12/”
Height: 2-1/2”
Length: 4”
• Extremely powerful holding strength.
• Provided with push-off screw to remove work from
magnetic hold.
POWER POT MAGNETS
PPM-652
•The 1” cube has four magnetic surfaces.
•The cube can be positioned from any side.
• It can hold two objects parallel, plus round pieces in
90° V.
• It can be rotated to be used on all sides on the work
table and simultaneously holding two objects parallel
or a round inspection piece in the 90° V.
POSITIONING MAGNETIC CUBE
MAGNETIC ADAPTER PLATE
Top & Bottom Surface Magnet
• Ideal for holding steel parts for welding, brazing, etc.
•Wing nut adjustment, no clamp needed.
•Two heavy mag block 2-3/8” long x 1-1/8” square
linked together for easy adjustment.
Useful as a holder for precision work in measuring,
boring and marking off.
• On-off switch makes it easy to attach and remove the
block easy.
•Two pieces, finished to same dimension and precision
and are furnished together as a pair.
MAGNETIC V-BLOCK
Usable for marking off round bar, measuring, grinding
& boring the works of different shape, tapping & other
similar operations.
• Magnetic force works on the upper, base and V-
shaped faces
• Magnetic force is easily changed over by lever
operation.
•Water-proof construction.
MAGNETIC V-HOLDER
$19.95
MODEL No.
MWL-002
$24.95
MODEL No.
MAP-280
$10.95
MODEL No.
MQC-001
PPM-651
PPM-650
MTC-400
MTC-100
MTC-200
MTC-300
$139.95
MODEL No.
2076
Each
Made In
Japan
Made In
Japan
MAGNETIC
MINI-CHUCKS
•
Permanent, powerful magnet.
•
On and Off switch.
•
Available in rectangular or round shapes.
•
D.O.T. Regulated. Shipped via ground freight only.
Made In
Japan
MAGNETIC
SQUARE BLOCK
With I Vee
•
Permanent, powerful
magnet.
•
Ideal for holding round
or irregular shapes.
•
Top surface with V
magnetized.
•
Oil and waterproof.
•
Double side On/Off
lever switch.
With 2 Offset Vee’s
•
Permanent, powerful
magnet.
•
Ideal for holding round
or irregular shapes.
•
All surfaces and vees
are precision ground.
•
3 faces, top and both
sides are magnetized.
•
Oil and waterproof.
•
Double side On/Off
lever switch.
Open
“KYB”
Solid
“KYA”
Made In
Japan
Made In
Japan
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 181
Model
No.
KMV-50
KMV-80
KMV-125
Dimensions
L x H x W
2.76” x 1.97” x 1.57”
3.94” x 3.15” x 1.97”
5.91” x 3.94” x 1.97”
“V”
Diameter
1.42”
2.36”
3.54”
Price
Pair
$445.00
595.00
825.00
Model
KVA-100
KVA-200
KVA-300
Width x Height x Length V-Dia.
2.4” x 2.9” x 3.1”
2.4” x 2.9” x 4.9”
2.4” x 2.9” x 7.1”
1-1/2”
1-1/2”
1-1/2”
Price
$189.95
250.00
525.00
Model
No.
MMZ-412
MMZ-614
MMC-5
MMC-8
Dimensions
L x W x H
4.5” x 1.6” x 1.6”
5.3” x 2.0” x 2.0”
2” Diameter x 2”H
3-5/32” Diameter x 3-5/32” H
Weight
lbs.
2
4.5
Price
Each
$545.00
695.00
$345.00
550.00
RECTANGULAR TYPE
ROUND TYPE
Model
No.
PPM-650
PPM-651
PPM-652
Dimensions
Dia. x Height
1-3/4” x 1-3/4”
2-1/8” x 2-1/8”
2-3/4” x 2-5/8”
Magnetic
Pull
50 lbs.
70 lbs.
150 lbs.
Price
Each
$24.95
33.95
45.00
Model
No.
KYA-8
KYA-13
KYA-18
Dimensions
W x L x H
3.1” x 3.1” x 3.1”
4.9” x 4.9” x 4.9”
7.1” x 7.1” x 7.1”
Weight
lbs.
7
51
75
Price
Each
$ 935.00
1695.00
2750.00
Model
No.
KYB-8
KYB-13
KYB-18
Dimensions
W x L x H
3.1” x 3.1” x 3.1”
4.9” x 4.9” x 4.9”
7.1” x 7.1” x 7.1”
Weight
lbs.
13
38
60
Price
Each
$ 570.00
1050.00
1425.00
Model
MTC-100
MTC-200
MTC-300
MVB-400
MVB-500
Width
2”
2-3/4”
2-3/4”
2-3/4”
Height
2”
2-1/2”
3”
3-5/8”
Length
5”
5-1/2”
5-1/2”
5-1/2”
Price
$350.00
395.00
450.00
450.00
995.00
Matched Pair of MVB-400
one side is sepparated so
as to adapt itself to the
surface of the instru-
ment, tool or part to be
held.
•The opposite side at- •Top & bottom parallel
tracts itself to any metal
surface on any machine. • 3-1/2” long x 2-1/2”
gage into a magnetic
unit and also be used as
a grinding chuck for
small grinding opera-
tions.
within .001”.
wide x 7/8” high.
MAGNETIC WELDING LINK
MAGNETIC
TOOLMAKER’S CHUCKS
Precision Ground
•Top, bottom and end magnetize simultaneously.
• All models precision ground flat, square and parallel
to an overall accuracy of .0005”.
• Bottom surface relieved .125” to minimize loss of
magnetism.
•
Model MTC-300
has 3/16” x 1/16” fine pole construc-
tion for holding small or thin parts and removable side
and end rails.
• Designed to enable fast and accurate holding of
ferrous metals for welding and assembly jobs.
•The Quick Clamp will hold sheet and tube at angles
of 180°, 90°, 75°, 60°, 45°, & 30°.
•The three body holes enable this new magnetic tool
to be built into jigs or hung up when not in use.
MAGNETIC QUICK CLAMP
Dim:
Base: 3-12/”
Height: 2-1/2”
Length: 4”
• Extremely powerful holding strength.
• Provided with push-off screw to remove work from
magnetic hold.
POWER POT MAGNETS
PPM-652
•The 1” cube has four magnetic surfaces.
•The cube can be positioned from any side.
• It can hold two objects parallel, plus round pieces in
90° V.
• It can be rotated to be used on all sides on the work
table and simultaneously holding two objects parallel
or a round inspection piece in the 90° V.
POSITIONING MAGNETIC CUBE
MAGNETIC ADAPTER PLATE
Top & Bottom Surface Magnet
• Ideal for holding steel parts for welding, brazing, etc.
•Wing nut adjustment, no clamp needed.
•Two heavy mag block 2-3/8” long x 1-1/8” square
linked together for easy adjustment.
Useful as a holder for precision work in measuring,
boring and marking off.
• On-off switch makes it easy to attach and remove the
block easy.
•Two pieces, finished to same dimension and precision
and are furnished together as a pair.
MAGNETIC V-BLOCK
Usable for marking off round bar, measuring, grinding
& boring the works of different shape, tapping & other
similar operations.
• Magnetic force works on the upper, base and V-
shaped faces
• Magnetic force is easily changed over by lever
operation.
•Water-proof construction.
MAGNETIC V-HOLDER
$19.95
MODEL No.
MWL-002
$24.95
MODEL No.
MAP-280
$10.95
MODEL No.
MQC-001
PPM-651
PPM-650
MTC-400
MTC-100
MTC-200
MTC-300
$139.95
MODEL No.
2076
Each
Made In
Japan
Made In
Japan
MAGNETIC
MINI-CHUCKS
•
Permanent, powerful magnet.
•
On and Off switch.
•
Available in rectangular or round shapes.
•
D.O.T. Regulated. Shipped via ground freight only.
Made In
Japan
MAGNETIC
SQUARE BLOCK
With I Vee
•
Permanent, powerful
magnet.
•
Ideal for holding round
or irregular shapes.
•
Top surface with V
magnetized.
•
Oil and waterproof.
•
Double side On/Off
lever switch.
With 2 Offset Vee’s
•
Permanent, powerful
magnet.
•
Ideal for holding round
or irregular shapes.
•
All surfaces and vees
are precision ground.
•
3 faces, top and both
sides are magnetized.
•
Oil and waterproof.
•
Double side On/Off
lever switch.
Open
“KYB”
Solid
“KYA”
Made In
Japan
Made In
Japan
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 181
Model
No.
KMV-50
KMV-80
KMV-125
Dimensions
L x H x W
2.76” x 1.97” x 1.57”
3.94” x 3.15” x 1.97”
5.91” x 3.94” x 1.97”
“V”
Diameter
1.42”
2.36”
3.54”
Price
Pair
$445.00
595.00
825.00
Model
KVA-100
KVA-200
KVA-300
Width x Height x Length V-Dia.
2.4” x 2.9” x 3.1”
2.4” x 2.9” x 4.9”
2.4” x 2.9” x 7.1”
1-1/2”
1-1/2”
1-1/2”
Price
$189.95
250.00
525.00
Model
No.
MMZ-412
MMZ-614
MMC-5
MMC-8
Dimensions
L x W x H
4.5” x 1.6” x 1.6”
5.3” x 2.0” x 2.0”
2” Diameter x 2”H
3-5/32” Diameter x 3-5/32” H
Weight
lbs.
2
4.5
Price
Each
$545.00
695.00
$345.00
550.00
RECTANGULAR TYPE
ROUND TYPE
Model
No.
PPM-650
PPM-651
PPM-652
Dimensions
Dia. x Height
1-3/4” x 1-3/4”
2-1/8” x 2-1/8”
2-3/4” x 2-5/8”
Magnetic
Pull
50 lbs.
70 lbs.
150 lbs.
Price
Each
$24.95
33.95
45.00
Model
No.
KYA-8
KYA-13
KYA-18
Dimensions
W x L x H
3.1” x 3.1” x 3.1”
4.9” x 4.9” x 4.9”
7.1” x 7.1” x 7.1”
Weight
lbs.
7
51
75
Price
Each
$ 935.00
1695.00
2750.00
Model
No.
KYB-8
KYB-13
KYB-18
Dimensions
W x L x H
3.1” x 3.1” x 3.1”
4.9” x 4.9” x 4.9”
7.1” x 7.1” x 7.1”
Weight
lbs.
13
38
60
Price
Each
$ 570.00
1050.00
1425.00
Model
MTC-100
MTC-200
MTC-300
MVB-400
MVB-500
Width
2”
2-3/4”
2-3/4”
2-3/4”
Height
2”
2-1/2”
3”
3-5/8”
Length
5”
5-1/2”
5-1/2”
5-1/2”
Price
$350.00
395.00
450.00
450.00
995.00
Matched Pair of MVB-400
