Page 182 Penn Tool Co. Precision Tooling 2014 Sale Catalog
P. 182
MAGNETIC V-BLOCKS
PRECISION GROUND
SPECIFICATIONS
90°V is held central
with the sides &
parallel with the
bottom
within
.0005. All working
surfaces square with
each other within
.0004.
Furnished in pairs
matched to .0001
T.I.R.
CAN BE USED AS PARALLELS
AND ANGLE PLATES
• Non-magnetic in itself but designed to
transmit the maximum holding power of a
magnetic chuck. Provides positive grip on
the work.
• Constructed of fused laminations in
precision alignment. No pins. May be
machined to fit any job.
• Highest permeability and low residual mag-
netism.
• Made with alternate laminations of 1/16”
iron x 1/16” brass.
PARALLEL & V-BLOCK SET
S-1-16
$2035.00
S-2-16
$2365.00
MAGNETIC ADJUSTABLE
V-BLOCK
•
Unique, first Magnetic Adjustable V-Block of
its kind.
•
Made of alternating material of high perme-
ability-low residual magnetism and non-mag-
netic brass strips.
•
Exclusive method of holding laminations
without pins or rivets, laminations are guaran-
teed not to shift.
•
For maximum holding power, laminations of
V, base & laminated V match perfectly.
•
Vernier is graduated to 5 minutes.
•
Angular setting by sectional gear and gear
pinion with knurled knob for easy turning.
Extension rod for hairline setting.
•
Vernier plate and sectional gear pinned to V
and keyed to base to eliminate any shifting.
•
V groove is precision ground to an included
angle of 90° parallel to the base and side of
the bottom block to .00005 over its entire
length.
Laminated V insert for flat work with unit (as shown in
photo). Handy knobs at each end to facilitate insertion
and removal, automatically line up laminations for
better magnetic performance.
MAGNET PARALLELS
• Ground on all four sides.
• Adjacent sides square with each other within
.004.
• Provides positive grip for small, thin or irregular
work which can not be held directly on a mag-
netic chuck. Greater gripping for thin work than
if held directly on a magnetic chuck.
• Mon-magnetic in itself but design to transmit
the maximum holding power of a magnetic
chuck. Provides positive grip on the work
• Constructed of fused lamination in precise
alignment. No pins. May be machined to fit
any job.
• Highest permeability & low residual magne-
tism.
• Alternate laminations. of 1/16” iron x 1/16” brass.
SPECIFY - “P” for Pair After Number
PRECISION MAGNETIC PRODUCTS - PRECISION & QUALITY SINCE 1933
PRECISION GROUND
MAGNET AUXILARY
PLATES AND BLOCKS
•
Models map-116 and map-1612 increase the
magnetic holding power of your chuck for thin
and small irregular work.
•
Alternate laminations. of 1/16” iron x 1/16”
brass.
•
Feature high permeability and low residual
magnetism. Precision ground.
•
Laminations are precision aligned. Are
constructed by fusing the laminations. No
pins are used.
•
Models MBM-1,2,3,4, & 5 are milled finished
so they may be machined into special shapes
and sizes.
PRECISION MAGNETIC BLOCK
MODEL
MV-50
$295.00
V-Block
On/Off Type
•
The V-block has three magnetic surfaces consisting
of a 90º V-angle 1-5/8" across the top, bottom surface
and end.
•
V-block has a .0035" accuracy for squreness,
paralleism and frames.
•
It is 2" wide, 2.75" high and 4" long.
•
The unit has it's own self-contained magnet with
approximately 220 lbs. of pull.
Visit Us On The Web: www.penntoolco.com
Page 182
SPECIFY - “P” for Pair After Number
S-3-16
$2965.00
Model
No.
3402-0990
3402-0901
3402-0992
3402-0993
Dimensions
H x W x D
3-3/4” x 2-3/4” x 3”
3-3/4” x 2-3/4” x 4”
3-3/4” x 2-3/4” x 5”
3-3/4” x 3” x 6”
Power
Pull
130 lbs.
250 lbs.
275 lbs.
320 lbs.
Price
Each
$ 79.95
85.00
119.95
185.00
Precise
MAGNETIC V-BLOCKS
WITH ON-OFF SWITCH
•
Precision ground finished working surfaces.
•
Ideal for scribing, grinding, measuring and
machining round or irregular shape items.
•
On/Off switch.
•
Two centered 90º Vees.
Model No.
MAP-116
MAP-1612
MBM-1
MBM-2
MBM-3
MBM-4
MBM-5
MBM-6
Size L x W x H
6” x 4” x 1/2”
12” x 12” x 1”
6” x 4-5/8” x 3-1/4”
6” x 12” x 2”
9” x 3-1/4” x 2”
12” x 12” x 3-1/4”
15” x 12” x 3-1/4”
18” x 12” x 3-1/4”
Price Each
$ 365.00
1285.00
715.00
1045.00
655.00
2640.00
3740.00
5150.00
Length
6”
9”
12”
Total Parallelism &
Straightness Over
Entire Length
.0002
.0002
.0003
Total Size
Tolerance
Between a Pair
.0002
.0002
.0003
1/16 Iron
1/16 Brass
P-26-16
P-28-16
P-36-16
P-38-16
P-61-16
P-62-16
P-63-16
P-64-16
P-41-16
P-44-16
P-46-16
P-48-16
P-121-16
P-122-16
P-91-16
Dimensions
W x H x L
1” x 2” x 6”
1” x 2” x 8”
1” x 3” x 6”
1” x 3” x 8”
1/4” x 1/2” x 6”
1/2” x 1” x 6”
1/2” x 1-1/4” x 6”
3/4” x 1-1/2” x 6”
1” x 2” x 4”
1” x 4” x 4”
1” x 4” x 6”
1” x 4” x 8”
1” x 2” x 12”
1-1/2” x 3” x 12”
2” x 3-1/4” x 9”
Price
Each
$235.00 $460.00
310.00
360.00
385.00
110.00
140.00
150.00
160.00
185.00
277.00
405.00
515.00
345.00
745.00 1395.00
635.00 1235.00
Price
Per Pair
600.00
715.00
755.00
210.00
255.00
292.00
320.00
330.00
540.00
790.00
990.00
665.00
1/16” Iron
1/16” Brass
MV-1-16
MV-2-16
MV-3-16
MV-4-16
Dimensions
L x W x H
1-1/2” x 1-5/8” x 1”
2-1/2” x 3” x 1-5/8”
3-3/8” x 4-1/4” x 2-1/2”
3-3/8” x 5-1/4” x 2-1/2”
Price
Each
$145.00 $280.00
285.00
545.00 1045.00
665.00 1265.00
Price
Per Pair
545.00
Model
MAV-64
MAV-64-1
Size
6” x 4-1/2” x 2-1/2”
Wood Case
Price
$2525.00
95.00
SET
No.
S-1-16
Pair
2
1
1
1
PRICE
PER SET
$2035.00
PARALLELS
1/4 x 1/2 x 6
1/2 x 1 x 6
1/2 x 1-1/4 x 6
3/4 x 1-1/2” x 6
EACH SET CONSISTS
OF THE FOLLOWING
SET
No.
S-2-16
Pair
1
Pair
1
PRICE
PER SET
$2365.00
PARALLELS
2 x 3-1/4 x 9
V-BLOCKS
3-3/8”L x 4-1/4”W
x 2-1/2”H - 3”
Dia. Work
Holding Cap
EACH SET CONSISTS
OF THE FOLLOWING
SET
No.
S-3-16
Pair
1
1
Pair
1
PRICE
PER SET
$2965.00
PARALLELS
1 x 2 x 12
1-1/2 x 3 x 12
V-BLOCKS
3-3/8”L x 5-1/4”W
x 2-1/2”H - 4”
Dia. Work
Holding Cap
EACH SET CONSISTS
OF THE FOLLOWING
Work
Hldg.
Cpcty
1” Dia.
2” Dia.
V-BLOCKS
1-1/2Lx1-5/8Wx1H
2-1/2Lx3Wx1-5/8H
Pair
1
1
PRECISION GROUND
SPECIFICATIONS
90°V is held central
with the sides &
parallel with the
bottom
within
.0005. All working
surfaces square with
each other within
.0004.
Furnished in pairs
matched to .0001
T.I.R.
CAN BE USED AS PARALLELS
AND ANGLE PLATES
• Non-magnetic in itself but designed to
transmit the maximum holding power of a
magnetic chuck. Provides positive grip on
the work.
• Constructed of fused laminations in
precision alignment. No pins. May be
machined to fit any job.
• Highest permeability and low residual mag-
netism.
• Made with alternate laminations of 1/16”
iron x 1/16” brass.
PARALLEL & V-BLOCK SET
S-1-16
$2035.00
S-2-16
$2365.00
MAGNETIC ADJUSTABLE
V-BLOCK
•
Unique, first Magnetic Adjustable V-Block of
its kind.
•
Made of alternating material of high perme-
ability-low residual magnetism and non-mag-
netic brass strips.
•
Exclusive method of holding laminations
without pins or rivets, laminations are guaran-
teed not to shift.
•
For maximum holding power, laminations of
V, base & laminated V match perfectly.
•
Vernier is graduated to 5 minutes.
•
Angular setting by sectional gear and gear
pinion with knurled knob for easy turning.
Extension rod for hairline setting.
•
Vernier plate and sectional gear pinned to V
and keyed to base to eliminate any shifting.
•
V groove is precision ground to an included
angle of 90° parallel to the base and side of
the bottom block to .00005 over its entire
length.
Laminated V insert for flat work with unit (as shown in
photo). Handy knobs at each end to facilitate insertion
and removal, automatically line up laminations for
better magnetic performance.
MAGNET PARALLELS
• Ground on all four sides.
• Adjacent sides square with each other within
.004.
• Provides positive grip for small, thin or irregular
work which can not be held directly on a mag-
netic chuck. Greater gripping for thin work than
if held directly on a magnetic chuck.
• Mon-magnetic in itself but design to transmit
the maximum holding power of a magnetic
chuck. Provides positive grip on the work
• Constructed of fused lamination in precise
alignment. No pins. May be machined to fit
any job.
• Highest permeability & low residual magne-
tism.
• Alternate laminations. of 1/16” iron x 1/16” brass.
SPECIFY - “P” for Pair After Number
PRECISION MAGNETIC PRODUCTS - PRECISION & QUALITY SINCE 1933
PRECISION GROUND
MAGNET AUXILARY
PLATES AND BLOCKS
•
Models map-116 and map-1612 increase the
magnetic holding power of your chuck for thin
and small irregular work.
•
Alternate laminations. of 1/16” iron x 1/16”
brass.
•
Feature high permeability and low residual
magnetism. Precision ground.
•
Laminations are precision aligned. Are
constructed by fusing the laminations. No
pins are used.
•
Models MBM-1,2,3,4, & 5 are milled finished
so they may be machined into special shapes
and sizes.
PRECISION MAGNETIC BLOCK
MODEL
MV-50
$295.00
V-Block
On/Off Type
•
The V-block has three magnetic surfaces consisting
of a 90º V-angle 1-5/8" across the top, bottom surface
and end.
•
V-block has a .0035" accuracy for squreness,
paralleism and frames.
•
It is 2" wide, 2.75" high and 4" long.
•
The unit has it's own self-contained magnet with
approximately 220 lbs. of pull.
Visit Us On The Web: www.penntoolco.com
Page 182
SPECIFY - “P” for Pair After Number
S-3-16
$2965.00
Model
No.
3402-0990
3402-0901
3402-0992
3402-0993
Dimensions
H x W x D
3-3/4” x 2-3/4” x 3”
3-3/4” x 2-3/4” x 4”
3-3/4” x 2-3/4” x 5”
3-3/4” x 3” x 6”
Power
Pull
130 lbs.
250 lbs.
275 lbs.
320 lbs.
Price
Each
$ 79.95
85.00
119.95
185.00
Precise
MAGNETIC V-BLOCKS
WITH ON-OFF SWITCH
•
Precision ground finished working surfaces.
•
Ideal for scribing, grinding, measuring and
machining round or irregular shape items.
•
On/Off switch.
•
Two centered 90º Vees.
Model No.
MAP-116
MAP-1612
MBM-1
MBM-2
MBM-3
MBM-4
MBM-5
MBM-6
Size L x W x H
6” x 4” x 1/2”
12” x 12” x 1”
6” x 4-5/8” x 3-1/4”
6” x 12” x 2”
9” x 3-1/4” x 2”
12” x 12” x 3-1/4”
15” x 12” x 3-1/4”
18” x 12” x 3-1/4”
Price Each
$ 365.00
1285.00
715.00
1045.00
655.00
2640.00
3740.00
5150.00
Length
6”
9”
12”
Total Parallelism &
Straightness Over
Entire Length
.0002
.0002
.0003
Total Size
Tolerance
Between a Pair
.0002
.0002
.0003
1/16 Iron
1/16 Brass
P-26-16
P-28-16
P-36-16
P-38-16
P-61-16
P-62-16
P-63-16
P-64-16
P-41-16
P-44-16
P-46-16
P-48-16
P-121-16
P-122-16
P-91-16
Dimensions
W x H x L
1” x 2” x 6”
1” x 2” x 8”
1” x 3” x 6”
1” x 3” x 8”
1/4” x 1/2” x 6”
1/2” x 1” x 6”
1/2” x 1-1/4” x 6”
3/4” x 1-1/2” x 6”
1” x 2” x 4”
1” x 4” x 4”
1” x 4” x 6”
1” x 4” x 8”
1” x 2” x 12”
1-1/2” x 3” x 12”
2” x 3-1/4” x 9”
Price
Each
$235.00 $460.00
310.00
360.00
385.00
110.00
140.00
150.00
160.00
185.00
277.00
405.00
515.00
345.00
745.00 1395.00
635.00 1235.00
Price
Per Pair
600.00
715.00
755.00
210.00
255.00
292.00
320.00
330.00
540.00
790.00
990.00
665.00
1/16” Iron
1/16” Brass
MV-1-16
MV-2-16
MV-3-16
MV-4-16
Dimensions
L x W x H
1-1/2” x 1-5/8” x 1”
2-1/2” x 3” x 1-5/8”
3-3/8” x 4-1/4” x 2-1/2”
3-3/8” x 5-1/4” x 2-1/2”
Price
Each
$145.00 $280.00
285.00
545.00 1045.00
665.00 1265.00
Price
Per Pair
545.00
Model
MAV-64
MAV-64-1
Size
6” x 4-1/2” x 2-1/2”
Wood Case
Price
$2525.00
95.00
SET
No.
S-1-16
Pair
2
1
1
1
PRICE
PER SET
$2035.00
PARALLELS
1/4 x 1/2 x 6
1/2 x 1 x 6
1/2 x 1-1/4 x 6
3/4 x 1-1/2” x 6
EACH SET CONSISTS
OF THE FOLLOWING
SET
No.
S-2-16
Pair
1
Pair
1
PRICE
PER SET
$2365.00
PARALLELS
2 x 3-1/4 x 9
V-BLOCKS
3-3/8”L x 4-1/4”W
x 2-1/2”H - 3”
Dia. Work
Holding Cap
EACH SET CONSISTS
OF THE FOLLOWING
SET
No.
S-3-16
Pair
1
1
Pair
1
PRICE
PER SET
$2965.00
PARALLELS
1 x 2 x 12
1-1/2 x 3 x 12
V-BLOCKS
3-3/8”L x 5-1/4”W
x 2-1/2”H - 4”
Dia. Work
Holding Cap
EACH SET CONSISTS
OF THE FOLLOWING
Work
Hldg.
Cpcty
1” Dia.
2” Dia.
V-BLOCKS
1-1/2Lx1-5/8Wx1H
2-1/2Lx3Wx1-5/8H
Pair
1
1
