Page 192 Penn Tool Co. Precision Tooling 2014 Sale Catalog
P. 192
LECTRIC - CENTERS
Harig's original cylindrical grinding fixture used for precision grinding between
centers. Dead center design permits "tenths" accuracies to be easily obtained.
Quickly converts a surface grinder to cylindrical grinding applications for
grinding punches, pins, reamers, cutters, shanks and shafts. Hold the piece part
in the Lectric-Centers to grind angles, grooves, races, and slots accurately and
efficiently. Also can be used for critical inspection. Motorized head and two-
speed pulley for fast Stock removal.
MODEL No.
025-100
Reg. $2190.00
With 11" Base Plate
& carrying Case
Accessories
Features:
•
Hardened & ground tool steel base allows grinding
between centers up to 7".
•
Grind and check parts within 0.00005 TIR.
•
Fan cooled motor and 2 speed pulley for efficient
operation.
•
Interchangeable hardened tool steel centers are
male on one end, female on the other.
•
Tail stock taper adjustment allows extremely
accurate settings to be obtained.
•
Head stock center is on lever controlled sliding ram
and has adjusting screw for spring tension.
•
Head stock & tail stock are both adjustable.
•
Base plate & tail stock with addition of rail can be
used with other Harig fixtures.
•
Built in diamond holder for quick dressing of
grinding wheels.
Center Height . . . . . . . 3.000"
Swing . . . . . . . . . . . . . . . . 6"
Motor . . . . . . . . . . 115V, 60C
Speeds . . . . . 180 & 360 RPM
Weight . . . . . . . . . . . . 20lbs.
Specifications:
055-100
105-100
$1995.00
Precise
ER COLLET PUNCH FORMER
MODEL No.
380-688
$695.00
•
Clamps workpiece quickly and steadily when
processing.
•
Clamping diameter: .0787-.787"
•
Utilized with ER32 spring collet.
Includes: 7 Pc. ER-32 Collet
1/8", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4"
KALAMAZOO INDUSTRIES 5C COLLET FIXTURES
Collet does not move up or down and retains positive relastionship to base.
MODEL No.
10C-100
$285.00
Precise
MODEL No.
3430
$69.95
Weight 18 lbs.
Weight 115.5 lbs.
Height: 3-3/4"
Base: 5" x 3-5/8"
Horizontal & Vertical
Hardened & Ground
Precise
5C HORIZONTAL & VERTICAL COLLET VISE
• Uses any standard 5C collet for a
capacity up to 1-1/8" round. Hex and
square collets are also available. Small
movement of lever opens or closes
collet.
• Can be used in either horizontal or
vertical position.
MODEL No.
900-0016
$59.95
Height: 4-1/2"
Base: 4-1/4" x 4"
Precise
5C VERTICAL COLLET VISE
• Uses any standard 5C collet for a capacity
up to 1-1/8" round. Hex and square collets
are also available. Small movement of lever
opens or closes collet.
• Mounted on plate for use in either vertical
or horizontal position.
MODEL No.
2035
$39.95
Height: 3-1/2"
Base: 2-1/8" x 7-3/4"
5C HORIZONTAL & VERTICAL
COLLET FIXTURE
Features:
• Collet does not move up or down.
• Retains positive relation to base.
• Can be adjusted or changed
without disturbing setup.
• With Cam-Lock and a
positive release.
Can be used in either horizontal
or vertical position.
MODEL No.
A1-210-5C
$195.00
Precise
MODEL No.
10-505-1
$59.95
Height: 3-3/4"
Base: 5" x 3-5/8"
Precise
5C HEX & SQUARE COLLET BLOCK CHUCKS
• For standard 5C collets.
• For fast setups on lathes, milling
machines, surface grinders and drill
presses.
• Made of tool steel, hardened and
ground square and parallel within
.0005".
• Collet rings only supplied in 3 piece
set.
Model
CBS-2*
CBS-3*
CBS-4
Description
Square, for 5C Collets
Hex, for 5C Collets
Quick-Acting, Lever
Collet Closer
Price
$27.50
27.50
16.50
3 Piece Set
SET No.
CBS-1
$46.95
Precise
PUNCH FORMER AND RADIUS DRESSER
$795.00
MODEL No.
202-320
W/Radius
Dresser Arm
and Diamond
Applications for grinding wheel and forming punch. Use for inside and outside
radius. Radius dresser standard with both models.
•
Max. diameter workpiece: 1-1/4"
•
V-Block: 1-3/16"
•
V-Block adjusting system: rack &
pinion.
•
Center height: 3-1/2"
•
Graduation: 360º
•
Indexing divisions: 24 every 15º± 10
seconds.
•
Roundness: within 0.0001" in 4"
•
Squareness: within 0.0002" in 4"
•
Tangential travel: 25-32
Made in
USA
Made in
China
*Collet Rings Not Included
Made In
USA
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 192
Model
15-30
91005
25-40
25-41
055-100
105-100
Description
18" Base Plate
Diamond Nib
Carbide Head Stock
Carbide Tail Stock
Sine-Plate 4" x 6"
Sine-Chuck 6" x 6"
Price
$950.00
25.00
245.00
200.00
795.00
1550.00
Harig's original cylindrical grinding fixture used for precision grinding between
centers. Dead center design permits "tenths" accuracies to be easily obtained.
Quickly converts a surface grinder to cylindrical grinding applications for
grinding punches, pins, reamers, cutters, shanks and shafts. Hold the piece part
in the Lectric-Centers to grind angles, grooves, races, and slots accurately and
efficiently. Also can be used for critical inspection. Motorized head and two-
speed pulley for fast Stock removal.
MODEL No.
025-100
Reg. $2190.00
With 11" Base Plate
& carrying Case
Accessories
Features:
•
Hardened & ground tool steel base allows grinding
between centers up to 7".
•
Grind and check parts within 0.00005 TIR.
•
Fan cooled motor and 2 speed pulley for efficient
operation.
•
Interchangeable hardened tool steel centers are
male on one end, female on the other.
•
Tail stock taper adjustment allows extremely
accurate settings to be obtained.
•
Head stock center is on lever controlled sliding ram
and has adjusting screw for spring tension.
•
Head stock & tail stock are both adjustable.
•
Base plate & tail stock with addition of rail can be
used with other Harig fixtures.
•
Built in diamond holder for quick dressing of
grinding wheels.
Center Height . . . . . . . 3.000"
Swing . . . . . . . . . . . . . . . . 6"
Motor . . . . . . . . . . 115V, 60C
Speeds . . . . . 180 & 360 RPM
Weight . . . . . . . . . . . . 20lbs.
Specifications:
055-100
105-100
$1995.00
Precise
ER COLLET PUNCH FORMER
MODEL No.
380-688
$695.00
•
Clamps workpiece quickly and steadily when
processing.
•
Clamping diameter: .0787-.787"
•
Utilized with ER32 spring collet.
Includes: 7 Pc. ER-32 Collet
1/8", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4"
KALAMAZOO INDUSTRIES 5C COLLET FIXTURES
Collet does not move up or down and retains positive relastionship to base.
MODEL No.
10C-100
$285.00
Precise
MODEL No.
3430
$69.95
Weight 18 lbs.
Weight 115.5 lbs.
Height: 3-3/4"
Base: 5" x 3-5/8"
Horizontal & Vertical
Hardened & Ground
Precise
5C HORIZONTAL & VERTICAL COLLET VISE
• Uses any standard 5C collet for a
capacity up to 1-1/8" round. Hex and
square collets are also available. Small
movement of lever opens or closes
collet.
• Can be used in either horizontal or
vertical position.
MODEL No.
900-0016
$59.95
Height: 4-1/2"
Base: 4-1/4" x 4"
Precise
5C VERTICAL COLLET VISE
• Uses any standard 5C collet for a capacity
up to 1-1/8" round. Hex and square collets
are also available. Small movement of lever
opens or closes collet.
• Mounted on plate for use in either vertical
or horizontal position.
MODEL No.
2035
$39.95
Height: 3-1/2"
Base: 2-1/8" x 7-3/4"
5C HORIZONTAL & VERTICAL
COLLET FIXTURE
Features:
• Collet does not move up or down.
• Retains positive relation to base.
• Can be adjusted or changed
without disturbing setup.
• With Cam-Lock and a
positive release.
Can be used in either horizontal
or vertical position.
MODEL No.
A1-210-5C
$195.00
Precise
MODEL No.
10-505-1
$59.95
Height: 3-3/4"
Base: 5" x 3-5/8"
Precise
5C HEX & SQUARE COLLET BLOCK CHUCKS
• For standard 5C collets.
• For fast setups on lathes, milling
machines, surface grinders and drill
presses.
• Made of tool steel, hardened and
ground square and parallel within
.0005".
• Collet rings only supplied in 3 piece
set.
Model
CBS-2*
CBS-3*
CBS-4
Description
Square, for 5C Collets
Hex, for 5C Collets
Quick-Acting, Lever
Collet Closer
Price
$27.50
27.50
16.50
3 Piece Set
SET No.
CBS-1
$46.95
Precise
PUNCH FORMER AND RADIUS DRESSER
$795.00
MODEL No.
202-320
W/Radius
Dresser Arm
and Diamond
Applications for grinding wheel and forming punch. Use for inside and outside
radius. Radius dresser standard with both models.
•
Max. diameter workpiece: 1-1/4"
•
V-Block: 1-3/16"
•
V-Block adjusting system: rack &
pinion.
•
Center height: 3-1/2"
•
Graduation: 360º
•
Indexing divisions: 24 every 15º± 10
seconds.
•
Roundness: within 0.0001" in 4"
•
Squareness: within 0.0002" in 4"
•
Tangential travel: 25-32
Made in
USA
Made in
China
*Collet Rings Not Included
Made In
USA
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 192
Model
15-30
91005
25-40
25-41
055-100
105-100
Description
18" Base Plate
Diamond Nib
Carbide Head Stock
Carbide Tail Stock
Sine-Plate 4" x 6"
Sine-Chuck 6" x 6"
Price
$950.00
25.00
245.00
200.00
795.00
1550.00
