Page 193 Penn Tool Co. Precision Tooling 2014 Sale Catalog
P. 193
PUNCH MASTER
PM-V2 INDEX FIXTURE
•
48 position index plate for hard
index every 7-1/2º
•
Built-in sine bar for setting angles
between hard index locations.
•
Ball & race design with 36 balls
under preload for minimum
deflection.
•
Bearings sealed to protect against
grit & moisture.
•
Extra large 1-5/8" v-block capacity.
•
Square & parallel within 0.0002"
•
Maximum spindle runout±0.000050"
•
Fitted wooden case included.
$1850.00
MODEL No.
PM-V2
Reg. $2056.00
With Wood Case
Specifications:
Center height . . . . . . . . . . . . 3"
Thru Hole . . . . . . . . . . . . 1-1/4"
Weight . . . . . . . . . . . . . . 12 lbs.
Overall Length . . . . . . . . . . . 7"
Height . . . . . . . . . . . . . 5-7/16"
Width . . . . . . . . . . . . . . . 4-1/2"
GRIND-ALL NO.1 FIXTURE
•
The fixture is built for high precision
work within ±.0001"...radii generated
with sliding V-block..multi-sides
produced w/24 division index.
•
Constructed of hardened tool steel and
with critical internal parts protected from
ginding dust, the Grind-all is built for
long lasting, accurate performance.
With Case
•
Universal holding tool for small, miniature
or intricate parts, used in conjunction
with larger V-blocks.
•
Ideal holding fixture for grinding/indexing
punches and pins-drilling-milling-EDM-
inspection optical comparators.
•
Capacity .030" to 9/32"
Specifications:
V-block Cap . . . 1-1/4" ± 10 Sec Grad. . . 360˚
Center Ht. . . . . 3.000" Net Weight . . . . 12lbs
Index Div . . . . . . . 24˚
1-1/4" V-Block
Capacity
Grind-All No. 1
MODEL No.
010-100
Reg. $2395.00
With Case
2" V-Block
Capacity
Grind-All No. 2
MODEL No.
020-100
Reg. $3950.00
$3750.00
$2250.00
MASTER GRIND
TWINDEX:
Combines 5C Collets
And V-blocks In One Fixture
•
72 position index plate for hard
index every 5 degrees.
•
Built in sine bar setting angles
between hard index locations.
•
Two heavy duty 4" diameter tapered
roller bearing in spindle.
•
Horizontal or vertical V-block
mounting.
•
Extra large 1-5/8" V-block capacity.
•
Square and parallel within .0002".
•
Spindle runout .00005".
•
Fitted wooden case included.
MODEL No.
MG-5CV-S1
Reg. List
$2404.00
Center Height 3"
Through Hole 1-1/4"
Base: 4" x 5"
Weight: 22 lbs.
OPTIONAL ACCESSORIES:
No. MG5-MD MotorDrive Kit $635.00
No. MG5-BTS Base and Tailstock $655.00
Sinset
Compatible
$2150.00
ULTRA GRIND
With V-Block & 5C Collet Capacity
•
Large 2" capacity v-block within
0.0001.
•
4.000" center height & 6-7/8"
diameter face-plate.
•
24 division indexing to +/- 10 seconds
•
Optional rotary table mechanisim
provides geared rotation in the
horizontal position.
Many other Attachments available.
Visit our web site @ www.penntoolco.com
$2895.00
MODEL No.
215-100
Reg. $2990.00
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 193
Model
215-100
210-70
015-100
Description
Ultra Grind Fixture
Motor Attachment
Base Plate & Tailstock (11" with rail)
Price
$2895.00
450.00
950.00
Note: Factory fitting of the MG-5CV-S1 to the
MG5-BTS is required. This is included at no charge,
even when the Baseplate & Tailstock is purchased
separately from the index Fixture
•
Hardened and ground tool steel with
solid one piece construction
•
Preloaded ball and race design provides
highest accuracy
•
5C collet holder ground in assembly to
under 0.00005 runout
•
360 degree graduated dial for
convenience
•
24 division index plate with precision
index pin locks in every 15 degrees to +/
- 10 seconds
•
Unique tangent “throw” allows Duo-Form
to swing 9/16" to either side of center and
makes radius to tangent wheel dressing
easy and efficient.
•
Straight angles and radii can be ground
without removing punch from v-block.
•
Timesaving fixture acts like two units in
one, for grinding punches and EDM
electrodes, precision radius-tangent
dressing, indexing and inspecting.
•
Hardened and ground tool steel with
solid one piece construction
•
Preloaded ball and race design
provides highest accuracy
•
V-Block adjusting screw allows for
quick movement of v-block to +/-
0.0002 without tapping
UNI-DEX COLLET INDEX FIXTURE
•
2 adjustable stops work with stop
pin to set accurate angles between
index locations
•
Locking screw locks spindle at any
position between indexes
•
Includes carrying case for protective
dust-free storage.
Optional:
No. 120-50 . . . . . . . . . $190.00
5" Face Plate with Adapter Shank
No. 120-60 . . . . . . . . . $1025.00
3 Jaw Chuck 3-3/8" opening w/
Adapter Shank
No. 120-70 . . . . . . . . . $1050.00
4-3/8" Magnetic Chuck w/Adapter
shank
Specifications:
Center Height . . . . . . . . . . . 3.000"
Square & Parallel . . . . . . . 0.0001"
Weight . . . . . . . . . . . . . . . . 11 lbs.
MODEL No.
070-100
$1950.00
With Case
DUO-FORM DUAL PURPOSE
RADIUS-TANGENT WHEEL DRESSER & PUNCH GRINDER
Specifications:
Center Height . . . . . . . . . . . 3.000"
V-Block Capacity . . . . . . . . . 1-1/4"
Graduations . . . . . . . . . . . . . . 360º
Square & Parallel . . . . . . . 0.0002"
Weight . . . . . . . . . . . . . . . . 17 lbs.
MODEL No.
060-100
Reg. $4590.00
$4350.00
With Case
Optional:
No. 10-52 . . . . . . . . . . . . $150.00
Radius Dresser Arm for dressing
wheels up to 10" diameter
No. 91002 . . . . . . . . . . . . . $75.00
O.D. Diamond Nib (#7)
No. 91003 . . . . . . . . . . . . . $78.00
I.D. Diamond Nib (.020)
Many other Attachments available.
Visit our web site @ www.penntoolco.com
Many other Attachments available.
Visit our web site @ www.penntoolco.com
PM-V2 INDEX FIXTURE
•
48 position index plate for hard
index every 7-1/2º
•
Built-in sine bar for setting angles
between hard index locations.
•
Ball & race design with 36 balls
under preload for minimum
deflection.
•
Bearings sealed to protect against
grit & moisture.
•
Extra large 1-5/8" v-block capacity.
•
Square & parallel within 0.0002"
•
Maximum spindle runout±0.000050"
•
Fitted wooden case included.
$1850.00
MODEL No.
PM-V2
Reg. $2056.00
With Wood Case
Specifications:
Center height . . . . . . . . . . . . 3"
Thru Hole . . . . . . . . . . . . 1-1/4"
Weight . . . . . . . . . . . . . . 12 lbs.
Overall Length . . . . . . . . . . . 7"
Height . . . . . . . . . . . . . 5-7/16"
Width . . . . . . . . . . . . . . . 4-1/2"
GRIND-ALL NO.1 FIXTURE
•
The fixture is built for high precision
work within ±.0001"...radii generated
with sliding V-block..multi-sides
produced w/24 division index.
•
Constructed of hardened tool steel and
with critical internal parts protected from
ginding dust, the Grind-all is built for
long lasting, accurate performance.
With Case
•
Universal holding tool for small, miniature
or intricate parts, used in conjunction
with larger V-blocks.
•
Ideal holding fixture for grinding/indexing
punches and pins-drilling-milling-EDM-
inspection optical comparators.
•
Capacity .030" to 9/32"
Specifications:
V-block Cap . . . 1-1/4" ± 10 Sec Grad. . . 360˚
Center Ht. . . . . 3.000" Net Weight . . . . 12lbs
Index Div . . . . . . . 24˚
1-1/4" V-Block
Capacity
Grind-All No. 1
MODEL No.
010-100
Reg. $2395.00
With Case
2" V-Block
Capacity
Grind-All No. 2
MODEL No.
020-100
Reg. $3950.00
$3750.00
$2250.00
MASTER GRIND
TWINDEX:
Combines 5C Collets
And V-blocks In One Fixture
•
72 position index plate for hard
index every 5 degrees.
•
Built in sine bar setting angles
between hard index locations.
•
Two heavy duty 4" diameter tapered
roller bearing in spindle.
•
Horizontal or vertical V-block
mounting.
•
Extra large 1-5/8" V-block capacity.
•
Square and parallel within .0002".
•
Spindle runout .00005".
•
Fitted wooden case included.
MODEL No.
MG-5CV-S1
Reg. List
$2404.00
Center Height 3"
Through Hole 1-1/4"
Base: 4" x 5"
Weight: 22 lbs.
OPTIONAL ACCESSORIES:
No. MG5-MD MotorDrive Kit $635.00
No. MG5-BTS Base and Tailstock $655.00
Sinset
Compatible
$2150.00
ULTRA GRIND
With V-Block & 5C Collet Capacity
•
Large 2" capacity v-block within
0.0001.
•
4.000" center height & 6-7/8"
diameter face-plate.
•
24 division indexing to +/- 10 seconds
•
Optional rotary table mechanisim
provides geared rotation in the
horizontal position.
Many other Attachments available.
Visit our web site @ www.penntoolco.com
$2895.00
MODEL No.
215-100
Reg. $2990.00
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Page 193
Model
215-100
210-70
015-100
Description
Ultra Grind Fixture
Motor Attachment
Base Plate & Tailstock (11" with rail)
Price
$2895.00
450.00
950.00
Note: Factory fitting of the MG-5CV-S1 to the
MG5-BTS is required. This is included at no charge,
even when the Baseplate & Tailstock is purchased
separately from the index Fixture
•
Hardened and ground tool steel with
solid one piece construction
•
Preloaded ball and race design provides
highest accuracy
•
5C collet holder ground in assembly to
under 0.00005 runout
•
360 degree graduated dial for
convenience
•
24 division index plate with precision
index pin locks in every 15 degrees to +/
- 10 seconds
•
Unique tangent “throw” allows Duo-Form
to swing 9/16" to either side of center and
makes radius to tangent wheel dressing
easy and efficient.
•
Straight angles and radii can be ground
without removing punch from v-block.
•
Timesaving fixture acts like two units in
one, for grinding punches and EDM
electrodes, precision radius-tangent
dressing, indexing and inspecting.
•
Hardened and ground tool steel with
solid one piece construction
•
Preloaded ball and race design
provides highest accuracy
•
V-Block adjusting screw allows for
quick movement of v-block to +/-
0.0002 without tapping
UNI-DEX COLLET INDEX FIXTURE
•
2 adjustable stops work with stop
pin to set accurate angles between
index locations
•
Locking screw locks spindle at any
position between indexes
•
Includes carrying case for protective
dust-free storage.
Optional:
No. 120-50 . . . . . . . . . $190.00
5" Face Plate with Adapter Shank
No. 120-60 . . . . . . . . . $1025.00
3 Jaw Chuck 3-3/8" opening w/
Adapter Shank
No. 120-70 . . . . . . . . . $1050.00
4-3/8" Magnetic Chuck w/Adapter
shank
Specifications:
Center Height . . . . . . . . . . . 3.000"
Square & Parallel . . . . . . . 0.0001"
Weight . . . . . . . . . . . . . . . . 11 lbs.
MODEL No.
070-100
$1950.00
With Case
DUO-FORM DUAL PURPOSE
RADIUS-TANGENT WHEEL DRESSER & PUNCH GRINDER
Specifications:
Center Height . . . . . . . . . . . 3.000"
V-Block Capacity . . . . . . . . . 1-1/4"
Graduations . . . . . . . . . . . . . . 360º
Square & Parallel . . . . . . . 0.0002"
Weight . . . . . . . . . . . . . . . . 17 lbs.
MODEL No.
060-100
Reg. $4590.00
$4350.00
With Case
Optional:
No. 10-52 . . . . . . . . . . . . $150.00
Radius Dresser Arm for dressing
wheels up to 10" diameter
No. 91002 . . . . . . . . . . . . . $75.00
O.D. Diamond Nib (#7)
No. 91003 . . . . . . . . . . . . . $78.00
I.D. Diamond Nib (.020)
Many other Attachments available.
Visit our web site @ www.penntoolco.com
Many other Attachments available.
Visit our web site @ www.penntoolco.com
