Page 237 Penn Tool Co. Precision Tooling 2014 Sale Catalog
P. 237
EZ-TRAM
" Simply The Fastest, Most Accurate Way To Get
The Head Of Your Mill Square To The Table"
•
EZ-TRAM allows the operator to quickly check and align the spindle of a
vertical turret mill, perpendicular to the machine table without disturbing the
work set-up (in most cases).
•
Made of "SIMG" cast iron and precision lapped flat to within .000070" over
entire gaging surface and parallel to within .00030" surface to surface.
•
EZ-TRAM has a 15.75" diameter with a 1.8" wide gaging surface, fits over a
6" machine vise with swivel.
•
MINI-TRAM has a 13" diameter with a 1.75" wide gaging surface and will fit
over a 6" machine vise without a swivel base.
•
MICRO-TRAM has a 10" diameter with a 1.6" wide gaging surface and will
fit over a 4" machine vise.
Lifetime
Warranty
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Boring Bar Holders
Turning & Facing Holders
40 Position Tool Post
•
Designed to be the best quick-change
tool post system in the industry for its
accuracy, rigidity and productivity.
•
Adjust to 40 different positions
indicated by a marked position dial
(index every 9º)
Boring & Turning Holders
•
Each tool holder's center height is
adjusted by a thumbscrew.
•
Tooling system for Lathes with a 6-
30" Swing.
Precise
40 POSITION QUICK-CHANGE TOOLING SYSTEM
VACUUM SINE CHUCKS
•
Provides an excellent means for
holding non-magnetic workpieces
for light machining or grinding.
•
Designed to bolt directly to a
SineSet® sine plate of the same size
& series with little or no indicating.
•
Each chuck has three 1/4 NPT holes
for mounting the vacuum gage, relief
valve and hose fitting.
•
The vacuum gage and relief valve
included.
•
All chucks have back and end rails
for positive location of workpieces.
Vacuum Chucks
Vacuum Pumps
•
All models are the oilless, motor-
mount, rotary vane design for
maximum performance with
minimum upkeep.
•
Each unit has internal mufflers and
filters. The filters were specifically
designed to be easily removed and
replaced.
•
The pumps have built-in thermal
overload protection.
•
Each model includes a support base,
the proper fittings and six feet of
reinforced hose.
Note: Because electric motors are dual frequency, multi-voltage AC for worldwide
applications, they are supplied without an electric cord, ready to be wired to
user specifications
KNEE MILL MANUAL
MULTI-HARD STOP
•
Up to 5 adjustable pre-set position hard stops
that precisely control vertical travel.
•
Center drill-drill-mill ect. without removing
work piece.
•
Slide in to active stop - pull back to cleat - now
in position for next stop, repeat.
•
Excellent for "quick-change" set-up systems.
•
Factory auto - stop is not interfered with or
modified and functions as normal factory
auto - stop.
MODEL No.
SMS-300
$149.95
Page 237
Model
No.
VC-66-S1
VC-612-S2
VC-618-S2
Sine
Series
S1
S2
S2
Size
L x W x H
6" x 6" x 2-1/4"
12" x 6" x 2-1/4"
18" x 6" x 2-1/4"
Square & Weight
Parallel
0.0002"
0.0003"
0.0004"
lbs.
15
28
41
Price
Each
$575.00
750.00
995.00
Model
VCP-14-MM
VCP-34-MM
Electric Motor
1/4HP, 110-115/208-230V, 50-60Hz, 1 Phase 10 32 lbs.
3/4HP, 110-115/208-230V, 50-60Hz, 1 Phase 10 54 lbs.
PSI Weight
Price
$475.00
795.00
Model
EZT-600S
EZT-600
EZT-400
Description
E-Z Tram 15.75" diameter fits 6" Vises with swivel base
Mini-Tram 13" diameter fits 6" Milling Vises
without swivel base
Micro-Tram 10" diameter fits 4" Milling Vises
Price
$275.00
225.00
175.00
Model
No.
202-950
202-951
202-952
202-953
Lathe
Swing
6"-13"
10"-18"
13"-20"
18"-30"
Body
Diameter
4.13"
5.14"
6.00"
8.00"
Max.
Drive
3 H.P.
6 H.P.
9 H.P.
8 H.P.
Tool
Post Type
"A"
"E"
"B"
"C"
Price
Each
$245.00
275.00
395.00
550.00
Model
No.
202-954
202-932
202-955
202-956
202-953-1
202-957
Max.
Tool Bit
3/4"
3/4"
1"
1"
1-1/4"
1-1/4"
Fits
Type
"A"
"E"
"E"
"B"
"B"
"C"
Price
Each
$ 65.00
79.00
85.00
115.00
125.00
135.00
Model
No.
202-958
202-959
202-960
202-961
Max.
Tool Bit Type
3/4"
1"
1-1/4"
1-1/2"
Fits
"A"
"E"
"B"
"C"
Price
Each
$ 79.00
95.00
110.00
165.00
Model
No.
900-053-1
900-054-1
900-057-1
900-058-1
900-059-1
Hole
Diameter
1-3/16"
1-5/8"
Holder
Length Type
3.16"
4.00"
Fits
"A"
"E"
"A"
"A"
"E"
Price
Each
$100.00
129.00
$ 22.50
25.00
35.00
1 MT
2 MT
3 MT
Morse Taper Bushings
Model
No.
NSS-001
NSS-002
NSS-003
NSS-004
Graduation
.001"
.0005"
.0005"
.01mm
Total
Range
.250"
.125"
.125"
2.5mm
Distance
Centers
4"
4"
3"
101.6mm
Dial
Diameter
2-1/4"
2-1/4"
1-1/4"
2-1/4"
Price
Each
$159.95
175.00
175.00
175.00
......ALL STEEL
•
4" between contact points
•
Ground surface,
Solid Steel
Construction of body
•
Size is about 6 3/4 wide and 5 1/2 from
top of shank to end of contact points
•
Accuracy to .001 inch
•
Weight is about 4 lbs. for shipping,
with custom case
•
Fully assembled with two AGD 2 or AGD
dial indicators,.001", .0005", or .01mm
graduations.
•
Self Calibrating
– no other tools, shims,
blocks etc. required to calibrate
•
Large 2-1/4" or 1-1/4" diameter dial
indicators for easy reading; .250 or
.125"total range.
•
Patented.
WHEEL DRESSER
The Last Word™ in Angle Tangent To Radius Wheel Dressing
•
Reduces set-up & dressing time to a minimum.
•
Wheel dressing is performed with wheel guard in place for operator safety.
•
All actuation knobs are at the back of dresser, keeping operator's hands at a safe
distance.
•
Direct setting together with high precision lapped parts makes accurate dressing
very simple..
•
Original Last Word dresser works equally well on surface, O.D. & I.D. grinders.
On O.D. & I.D. grinders it is simply clamped vertically on an angle plate.
•
Large bearing surfaces & positive locking devices make this dresser the most rigid
on the market.
•
Manufactured of quality materials & engineered with service in mind, including
adjustable gibs to compensate for wear, the Original Last Word dresser will give
many years of satisfactory service with a minimum of upkeep.
Center Height . . . . . . . . . . . .3.400"
Max. Wheel . . . . . . . . . . . . . . . . 8"
Overall Length . . . . . . . . . . . . . 14"
Weight . . . . . . . . . . . . . . . . . 27 lbs.
MODEL No.
LWD-800
$2395.00
With Storage Case
Specifications:
Convex Radii . . . . . . . . . . . . . . . 0-2-1/4"
Concave Radii . . . . . . . . . . . . . . . . 0-4"
Tangent Travel . . . . . . . . . . . . . . . 1-7/8"
" Simply The Fastest, Most Accurate Way To Get
The Head Of Your Mill Square To The Table"
•
EZ-TRAM allows the operator to quickly check and align the spindle of a
vertical turret mill, perpendicular to the machine table without disturbing the
work set-up (in most cases).
•
Made of "SIMG" cast iron and precision lapped flat to within .000070" over
entire gaging surface and parallel to within .00030" surface to surface.
•
EZ-TRAM has a 15.75" diameter with a 1.8" wide gaging surface, fits over a
6" machine vise with swivel.
•
MINI-TRAM has a 13" diameter with a 1.75" wide gaging surface and will fit
over a 6" machine vise without a swivel base.
•
MICRO-TRAM has a 10" diameter with a 1.6" wide gaging surface and will
fit over a 4" machine vise.
Lifetime
Warranty
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Boring Bar Holders
Turning & Facing Holders
40 Position Tool Post
•
Designed to be the best quick-change
tool post system in the industry for its
accuracy, rigidity and productivity.
•
Adjust to 40 different positions
indicated by a marked position dial
(index every 9º)
Boring & Turning Holders
•
Each tool holder's center height is
adjusted by a thumbscrew.
•
Tooling system for Lathes with a 6-
30" Swing.
Precise
40 POSITION QUICK-CHANGE TOOLING SYSTEM
VACUUM SINE CHUCKS
•
Provides an excellent means for
holding non-magnetic workpieces
for light machining or grinding.
•
Designed to bolt directly to a
SineSet® sine plate of the same size
& series with little or no indicating.
•
Each chuck has three 1/4 NPT holes
for mounting the vacuum gage, relief
valve and hose fitting.
•
The vacuum gage and relief valve
included.
•
All chucks have back and end rails
for positive location of workpieces.
Vacuum Chucks
Vacuum Pumps
•
All models are the oilless, motor-
mount, rotary vane design for
maximum performance with
minimum upkeep.
•
Each unit has internal mufflers and
filters. The filters were specifically
designed to be easily removed and
replaced.
•
The pumps have built-in thermal
overload protection.
•
Each model includes a support base,
the proper fittings and six feet of
reinforced hose.
Note: Because electric motors are dual frequency, multi-voltage AC for worldwide
applications, they are supplied without an electric cord, ready to be wired to
user specifications
KNEE MILL MANUAL
MULTI-HARD STOP
•
Up to 5 adjustable pre-set position hard stops
that precisely control vertical travel.
•
Center drill-drill-mill ect. without removing
work piece.
•
Slide in to active stop - pull back to cleat - now
in position for next stop, repeat.
•
Excellent for "quick-change" set-up systems.
•
Factory auto - stop is not interfered with or
modified and functions as normal factory
auto - stop.
MODEL No.
SMS-300
$149.95
Page 237
Model
No.
VC-66-S1
VC-612-S2
VC-618-S2
Sine
Series
S1
S2
S2
Size
L x W x H
6" x 6" x 2-1/4"
12" x 6" x 2-1/4"
18" x 6" x 2-1/4"
Square & Weight
Parallel
0.0002"
0.0003"
0.0004"
lbs.
15
28
41
Price
Each
$575.00
750.00
995.00
Model
VCP-14-MM
VCP-34-MM
Electric Motor
1/4HP, 110-115/208-230V, 50-60Hz, 1 Phase 10 32 lbs.
3/4HP, 110-115/208-230V, 50-60Hz, 1 Phase 10 54 lbs.
PSI Weight
Price
$475.00
795.00
Model
EZT-600S
EZT-600
EZT-400
Description
E-Z Tram 15.75" diameter fits 6" Vises with swivel base
Mini-Tram 13" diameter fits 6" Milling Vises
without swivel base
Micro-Tram 10" diameter fits 4" Milling Vises
Price
$275.00
225.00
175.00
Model
No.
202-950
202-951
202-952
202-953
Lathe
Swing
6"-13"
10"-18"
13"-20"
18"-30"
Body
Diameter
4.13"
5.14"
6.00"
8.00"
Max.
Drive
3 H.P.
6 H.P.
9 H.P.
8 H.P.
Tool
Post Type
"A"
"E"
"B"
"C"
Price
Each
$245.00
275.00
395.00
550.00
Model
No.
202-954
202-932
202-955
202-956
202-953-1
202-957
Max.
Tool Bit
3/4"
3/4"
1"
1"
1-1/4"
1-1/4"
Fits
Type
"A"
"E"
"E"
"B"
"B"
"C"
Price
Each
$ 65.00
79.00
85.00
115.00
125.00
135.00
Model
No.
202-958
202-959
202-960
202-961
Max.
Tool Bit Type
3/4"
1"
1-1/4"
1-1/2"
Fits
"A"
"E"
"B"
"C"
Price
Each
$ 79.00
95.00
110.00
165.00
Model
No.
900-053-1
900-054-1
900-057-1
900-058-1
900-059-1
Hole
Diameter
1-3/16"
1-5/8"
Holder
Length Type
3.16"
4.00"
Fits
"A"
"E"
"A"
"A"
"E"
Price
Each
$100.00
129.00
$ 22.50
25.00
35.00
1 MT
2 MT
3 MT
Morse Taper Bushings
Model
No.
NSS-001
NSS-002
NSS-003
NSS-004
Graduation
.001"
.0005"
.0005"
.01mm
Total
Range
.250"
.125"
.125"
2.5mm
Distance
Centers
4"
4"
3"
101.6mm
Dial
Diameter
2-1/4"
2-1/4"
1-1/4"
2-1/4"
Price
Each
$159.95
175.00
175.00
175.00
......ALL STEEL
•
4" between contact points
•
Ground surface,
Solid Steel
Construction of body
•
Size is about 6 3/4 wide and 5 1/2 from
top of shank to end of contact points
•
Accuracy to .001 inch
•
Weight is about 4 lbs. for shipping,
with custom case
•
Fully assembled with two AGD 2 or AGD
dial indicators,.001", .0005", or .01mm
graduations.
•
Self Calibrating
– no other tools, shims,
blocks etc. required to calibrate
•
Large 2-1/4" or 1-1/4" diameter dial
indicators for easy reading; .250 or
.125"total range.
•
Patented.
WHEEL DRESSER
The Last Word™ in Angle Tangent To Radius Wheel Dressing
•
Reduces set-up & dressing time to a minimum.
•
Wheel dressing is performed with wheel guard in place for operator safety.
•
All actuation knobs are at the back of dresser, keeping operator's hands at a safe
distance.
•
Direct setting together with high precision lapped parts makes accurate dressing
very simple..
•
Original Last Word dresser works equally well on surface, O.D. & I.D. grinders.
On O.D. & I.D. grinders it is simply clamped vertically on an angle plate.
•
Large bearing surfaces & positive locking devices make this dresser the most rigid
on the market.
•
Manufactured of quality materials & engineered with service in mind, including
adjustable gibs to compensate for wear, the Original Last Word dresser will give
many years of satisfactory service with a minimum of upkeep.
Center Height . . . . . . . . . . . .3.400"
Max. Wheel . . . . . . . . . . . . . . . . 8"
Overall Length . . . . . . . . . . . . . 14"
Weight . . . . . . . . . . . . . . . . . 27 lbs.
MODEL No.
LWD-800
$2395.00
With Storage Case
Specifications:
Convex Radii . . . . . . . . . . . . . . . 0-2-1/4"
Concave Radii . . . . . . . . . . . . . . . . 0-4"
Tangent Travel . . . . . . . . . . . . . . . 1-7/8"
