Page 381 Penn Tool Co. Precision Tooling 2014 Sale Catalog
P. 381
ALIGN
POWER MILLING TABLE FEED
150 lbs. TORQUE AVERAGE
•
150 lbs. torque average
•
Special electrical relay protects against damage
caused by power failure.
•
New and stronger design assures long trouble free
life.
•
Electrical & mechanical parts are made for easy
maintenance.
•
Rapid breaking, full range, variable speed control,
Built-in slipclutch action to protect plastic gear.
Table Feed
X-Axis
AL-400SX
•
Higher torque than competitive
models.
•
Controlled feed rate.
•
Smooth finish, regulated control
eliminates most second finish
cuts.
•
Automatic shutoff at the end of a
cut with electric limit switches.
•
Superior thermal characteristics
for higher loading.
•
Easy installation with mounting
hardware kits for more than
seventy mills.
•
Trouble-free performance; light-
weight motor minimizes table
deflection problems; safety
clutch with limit switch design
eliminates damage to lead screw
or feed if a hard stop is
encountered.
Name Your
Mill
We Have
Your Feed
B'Port Table Feed
140 Lbs. Torque
Reg. $660.00
MODEL No.
200-140
POWER MILLING TABLE
FEEDS FOR B'PORT TYPE MILLS
$375.00
$629.95
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Made
In
Taiwan
Page 381
POWERLOCK™ POWER DRAWERBARS FOR
BRIDGEPORT TYPE MILLING MACHINES
Manual Type
MODEL No.
BR-6000
Reg. List
$625.00
AutomaticType
MODEL No.
BR-1000
Reg. List
$775.00
$575.00
Specify your Mill
name when ordering
$736.00
•
Available for most manual & CNC Mills
with standard R-8 collets or 30 or 40
Taper tool holders.
•
Power Drawbars reduce tool change time
and allow more cutting time in
the cycle. This eliminates waste
•
The whole process using Kurt auto-
matic or mechanical Power Locks cuts
the tool change time to 1/4 of the time
required to change tools manually
with wrenches. An added benefit is
consistent on the drawbar rod.
•
Operates on shop air supply, filter/
lubricator, regulator and gauge
included with each unit- provides
Clean oiled air to ensure long life.
Specify your Mill
name when ordering
A&T UNIVERSAL POWER DRAWER BAR
•
The ADB-123 includes specially designed & patented Universal Mounting
Flange that adapts to all "Taiwanese Made" Republic Lagun, Kondia & Bridgeport
Mills. Top quality impact wrench used.
•
•
Unique adjustable draw bar feature enables the operator to preset length of
draw bar - No special draw bar required!.
•
10 minute simple & easy installation on all vari speed mills, CNC machines &
step pulley heads. Requires only 80 PSI of compressed air to operate.
•
For Variable
Speed Mills
MODEL No.
ADB-123
For Step Pulley
Mills
MODEL No.
ADB-123SP
ADB-123
Shown
Complete
Ready For
Mounting
$495.00
$495.00
POWER KNEE FEED
THE NEW 200 Lbs TORQUE
More Power ~ Lifts The Heaviest
Knee On The Market
Specifications:
•
Mounting hardware kits
available to precisely fit most
milling machines.
•
Semi-automated machining on
most knee mills up to 5 HP.
•
Peak torque: to 200 in-lb./22.6
Nm (half-wave series motor).
•
Intermittent torque: 150 in-lb/
17 Nm.
•
Continuous torque: 120 in-lb/
13.0 Nm.
•
Variable feed rate: knee 0-12
IPM/0-305mm/min.
•
Helical gearing and torque
limiting friction safety clutch
with new and improved gear.
•
Electrical: 110V, 50/60 Hz, 4.0
amps.
•
Approx. weight; 21 lbs./9.4 kg.
•
One year warranty, parts and
labor.
$695.95
FOR
BRIDGEPORT
Series 1
MODEL No.
M-0280-200
Reg. $756.00
MILL SAVER WAY COVERS
•
The Mill Saver is a high quality, way
cover system designed to shield your
mill's column and ways from abrasive
chips and debris that cause premature
wear and tear and bind up of the
knee and table.
SET No.
99-218
Includes:
high quality, fully
serviceable die cast top
bracket with front and rear
rubber covers.
•
Prolong the life of your mill and help
retain machining precision with the
one and only Mill Saver.
•
Fits standard Bridgeport type mills.
$79.95
Model
200-140
200-150
251-140
250-140
251-150
250-150
280-140
Torque
140 lbs.
150 lbs.
140 lbs.
140 lbs.
150 lbs.
150 lbs.
140 lbs.
Feed Type
Table "X"
Table "X"
9" Cross "Y"
12" Cross "Y"
9" Cross "Y"
12" Cross "Y"
Knee "Z"
Price
$629.95
695.00
$722.00
719.00
825.00
795.00
$720.00
Model No.
AL-99SP
Description
Type
Longitudinal X-axis
Cross Feed Y-axis
Knee Feed Z-axis
Longitudinal X-axis
Cross Feed Y-axis
Knee Feed Z-axis
Longitudinal X-axis
Special
Price
$375.00
425.00
425.00
$395.00
450.00
450.00
$330.00
$65.00
35.00
Ave. 150, Max. 550In-lbs., 0-200 RPM
Ave. 150, Max. 650In-lbs., 0-200 RPM
For Most Mill/Drill Machines, 0-165 RPM
Replacement Bevel Gear
Replacement Nylon Gear
Model
No.
AL-400S
AL-400SX
AL-400SY
AL-400SZ
AL-500S
AL-500SX
AL-500SY
AL-500SZ
AL-99SP
AL-99SP
A-0100-03
A-0934-4
Torque
Rating
150 lbs.
150 lbs.
150 lbs.
150 lbs.
150 lbs.
150 lbs.
135 lbs.
POWER MILLING TABLE FEED
150 lbs. TORQUE AVERAGE
•
150 lbs. torque average
•
Special electrical relay protects against damage
caused by power failure.
•
New and stronger design assures long trouble free
life.
•
Electrical & mechanical parts are made for easy
maintenance.
•
Rapid breaking, full range, variable speed control,
Built-in slipclutch action to protect plastic gear.
Table Feed
X-Axis
AL-400SX
•
Higher torque than competitive
models.
•
Controlled feed rate.
•
Smooth finish, regulated control
eliminates most second finish
cuts.
•
Automatic shutoff at the end of a
cut with electric limit switches.
•
Superior thermal characteristics
for higher loading.
•
Easy installation with mounting
hardware kits for more than
seventy mills.
•
Trouble-free performance; light-
weight motor minimizes table
deflection problems; safety
clutch with limit switch design
eliminates damage to lead screw
or feed if a hard stop is
encountered.
Name Your
Mill
We Have
Your Feed
B'Port Table Feed
140 Lbs. Torque
Reg. $660.00
MODEL No.
200-140
POWER MILLING TABLE
FEEDS FOR B'PORT TYPE MILLS
$375.00
$629.95
PENN TOOL CO.
TOLL FREE 1-800-526-4956 FAX 1-973-761-1494
Made
In
Taiwan
Page 381
POWERLOCK™ POWER DRAWERBARS FOR
BRIDGEPORT TYPE MILLING MACHINES
Manual Type
MODEL No.
BR-6000
Reg. List
$625.00
AutomaticType
MODEL No.
BR-1000
Reg. List
$775.00
$575.00
Specify your Mill
name when ordering
$736.00
•
Available for most manual & CNC Mills
with standard R-8 collets or 30 or 40
Taper tool holders.
•
Power Drawbars reduce tool change time
and allow more cutting time in
the cycle. This eliminates waste
•
The whole process using Kurt auto-
matic or mechanical Power Locks cuts
the tool change time to 1/4 of the time
required to change tools manually
with wrenches. An added benefit is
consistent on the drawbar rod.
•
Operates on shop air supply, filter/
lubricator, regulator and gauge
included with each unit- provides
Clean oiled air to ensure long life.
Specify your Mill
name when ordering
A&T UNIVERSAL POWER DRAWER BAR
•
The ADB-123 includes specially designed & patented Universal Mounting
Flange that adapts to all "Taiwanese Made" Republic Lagun, Kondia & Bridgeport
Mills. Top quality impact wrench used.
•
•
Unique adjustable draw bar feature enables the operator to preset length of
draw bar - No special draw bar required!.
•
10 minute simple & easy installation on all vari speed mills, CNC machines &
step pulley heads. Requires only 80 PSI of compressed air to operate.
•
For Variable
Speed Mills
MODEL No.
ADB-123
For Step Pulley
Mills
MODEL No.
ADB-123SP
ADB-123
Shown
Complete
Ready For
Mounting
$495.00
$495.00
POWER KNEE FEED
THE NEW 200 Lbs TORQUE
More Power ~ Lifts The Heaviest
Knee On The Market
Specifications:
•
Mounting hardware kits
available to precisely fit most
milling machines.
•
Semi-automated machining on
most knee mills up to 5 HP.
•
Peak torque: to 200 in-lb./22.6
Nm (half-wave series motor).
•
Intermittent torque: 150 in-lb/
17 Nm.
•
Continuous torque: 120 in-lb/
13.0 Nm.
•
Variable feed rate: knee 0-12
IPM/0-305mm/min.
•
Helical gearing and torque
limiting friction safety clutch
with new and improved gear.
•
Electrical: 110V, 50/60 Hz, 4.0
amps.
•
Approx. weight; 21 lbs./9.4 kg.
•
One year warranty, parts and
labor.
$695.95
FOR
BRIDGEPORT
Series 1
MODEL No.
M-0280-200
Reg. $756.00
MILL SAVER WAY COVERS
•
The Mill Saver is a high quality, way
cover system designed to shield your
mill's column and ways from abrasive
chips and debris that cause premature
wear and tear and bind up of the
knee and table.
SET No.
99-218
Includes:
high quality, fully
serviceable die cast top
bracket with front and rear
rubber covers.
•
Prolong the life of your mill and help
retain machining precision with the
one and only Mill Saver.
•
Fits standard Bridgeport type mills.
$79.95
Model
200-140
200-150
251-140
250-140
251-150
250-150
280-140
Torque
140 lbs.
150 lbs.
140 lbs.
140 lbs.
150 lbs.
150 lbs.
140 lbs.
Feed Type
Table "X"
Table "X"
9" Cross "Y"
12" Cross "Y"
9" Cross "Y"
12" Cross "Y"
Knee "Z"
Price
$629.95
695.00
$722.00
719.00
825.00
795.00
$720.00
Model No.
AL-99SP
Description
Type
Longitudinal X-axis
Cross Feed Y-axis
Knee Feed Z-axis
Longitudinal X-axis
Cross Feed Y-axis
Knee Feed Z-axis
Longitudinal X-axis
Special
Price
$375.00
425.00
425.00
$395.00
450.00
450.00
$330.00
$65.00
35.00
Ave. 150, Max. 550In-lbs., 0-200 RPM
Ave. 150, Max. 650In-lbs., 0-200 RPM
For Most Mill/Drill Machines, 0-165 RPM
Replacement Bevel Gear
Replacement Nylon Gear
Model
No.
AL-400S
AL-400SX
AL-400SY
AL-400SZ
AL-500S
AL-500SX
AL-500SY
AL-500SZ
AL-99SP
AL-99SP
A-0100-03
A-0934-4
Torque
Rating
150 lbs.
150 lbs.
150 lbs.
150 lbs.
150 lbs.
150 lbs.
135 lbs.
