Page 382 Penn Tool Co. Precision Tooling 2014 Sale Catalog
P. 382
Visit Us On the Web: www.penntoolco.com
Page 382
HAND OPERATED
SURFACE GRINDER
Features:
•
The table slides on 36 precision ball bearings. You can
move it with fingertip pressure.
•
Ball bearings do not require periodic disassembly and
cleaning. 7" wheel, 6" x 12" travel.
•
•
3/4 H.P. motor, 1 phase, 3500 rpm.
•
Includes 5" x 10" magnetic chuck.
Specifications:
Table travel longitudinal . . . . . . . . 12-5/8"
Crossfeed . . . . . . . . . . . . . . . . . . 6-11/16"
Height under 7" dia. wheel . . . . . . . 5-1/2"
Speed . . . . . . . . . . . . . . . . . . . . 3500 RPM
Graduations . . . . . . . . . . . . . . . . . . 0.001"
Working surface . . . . . . . . 5-1/4" x 12-1/4"
Weight . . . . . . . . . . . . . . . . . . . . . 451 lbs.
MODEL No.
GSG-12B
W/5"x10"
Mag. Chuck
Less Cabinet Stand
Optional:
Cabinet Base
MODEL No.
GSG-12S
Made in
Taiwan
$2495.00
$245.00
SHAPLANE RADIUS TOOLS
•
A simple and accurate way to turn a
radius.
•
Each unit features a rigid cast iron
construction for an accurate chatter-
free operation and long life. The
gearing is fully enclosed to prevent
the entrance of any chips or foreign
matter.
•
Extension handles are included to
keep your hands away from the hot
chips while feeding the tool.
•
All tools use 1/4" square tool bits
except for the No. 24804 which
uses a 3/8" square tool bit.
HOLDRIDGE
RADII-CUTTER - CUTS AND FORMS CONCAVE, CONVEX, SPHERICAL SHAPES
MODEL No.
14-PA
$2195.00
Power Drive Unit For 12-DL
The
Model 12-DL
fits lathes 15" and larger and will cut from 0 to12" diameter convex
ball shapes and from 0 to 12" concave sockets to radius depth. By reversing the "C"
yokes, larger diameter sockets may be formed up to 24" depending upon capacity of
lathe. The radius depth will be minus 3/4" to allow for the "boss line" of the Radii-
Cutter. Compound height from the base of the tool to the centerline is adjustable from
1-5/8" to 1-3/4". Tool may be shimmed to fit various model lathes and turret lathes.
The popular
Model 4-ST Radii-Cutter
for medium lathes will cut from 0 to 4"
diameter convex ball shapes and from 0 to 4" concave sockets to radius depth. By
reversing the "C" yoke, sockets up to 12" in diameter may be formed. However,
radius depth will be minus 17/32" to allow for the "boss line" of the tool. Compound
height from the base of the tool to the centerline is adjustable from 1-5/8" to 1-3/4".
Tool may be shimmed to fit various model lathes and turet lathes
The small
Model 3-ST Radii-Cutter
is specially designed for all small lathes, will
cut from 0 to 3" diameter convex ball shapes and from 0 to 3" concave sockets to
radius depth. By reversing the yoke, sockets up to 8" may be formed, however,
radius depth will be minus 17/32" to allow for the "boss line" of the tool. Two
additional straight spindle yokes and two additional tool bits as well as a dial
calibrated in degrees are supplied in the
deluxe model
for forming pipe bending
dies, form rollers, etc. Compound height from base of the tool to the centerline is
1". Tool may be shimmed to fit various model lathes and turret lathes.
The
Model 8-DL
fits all medium and large lathes and will cut from 0 to 8" convex
ball shapes and from 0 to 8" concave sockets to radius depth. By reversing the
large "C" yoke sockets up to 20" may be formed, however, the radius depth will
be minus 3/4" to allow the "boss line" of the Radii-Cutter. Compound height from
the base of the tool to the centerline is adjustable from 1-5/8" to 1-3/4". Tool may
be shimmed to fit various model lathes and turret lathes.
MODEL 3-ST Standard And 3-DL Deluxe
MODEL No. 3-ST -
$650.00
MODEL No. 3-DL -
$895.00
MODEL 8-DL Deluxe Rad II Cutter Set
MODEL No. 8-DL Deluxe -
$1995.00
MODEL 4-ST Standard And 4-DL Deluxe
MODEL No. 4-ST -
$750.00
MODEL No. 4-DL -
$1150.00
MODEL 12-DL Deluxe Rad II Cutter Set
MODEL No. 12-DL Deluxe -
$2750.00
VERTICAL SLOTTING HEAD
•
Forms indicate shapes extruded dies and
complex patterns.
•
Mounts on the rear of the V-Ram (suitable
for any Bridgeport type mills).
•
Easy adjustment to make any key or
groove on cone or tilted surface.
•
Vise-type clamping flange (Easy
mounting and discharging)
•
Swing the turret 180º to position it
over the table and ready to work.
•
Uses a Vertical tool motion to shape
and slot.
Specifications:
Stroke . . . . . . . . . . . . . . . . . . 0-5"
Strokes Per Min . . . . . . 35, 54, 79,
112, 160
Motor Speed . . . . . . . . 1370 RPM
Motor . . . . 3/4 H.P. 220V, 3 Phase
VSH-100B (Flange)
VSH-100
(Tool Cutter)
Model
24801
24803
24804
24805
24806
24807
Radius
Convex Max. 2-1/2" Dia. Ball 1-1/4" x 9/16" x 6" $345.00
Concave
Concave
Convex Max. 1-5/8" Dia. Ball
Concave
Concave
Range
Min. 1/2" Radius
Min. 1" Radius
Min. 3/8" Radius
Min. 3/4" Radius
Shank
1-1/4" x 9/16" x 6"
1-1/4" x 9/16" x 6"
1" x 3/8" x 4"
1" x 3/8" x 4"
1" x 3/8" x 4"
List
345.00
345.00
325.00
325.00
325.00
Sale
$295.00
295.00
295.00
265.00
265.00
265.00
No. 24801, 24803 and 24804 are for lathes 13" and over.
No. 24805, 24806 and 24807 are for lathes 9" to 13"
Model
VSH-100
VSH-100A
VSH-100B
Description
Vertical Slotting Head
Cutter Set
Flange
Price
$2795.00
395.00
295.00
•
Heavy-duty precision head... all bearing surfaces
are precision bored simultaneously for exact
alignment. Eight ball bearings support the drive
and spindle, lower spindle bearing has a double
row to absorb both radial and thrust loads.
•
3 MT spindle... with 6-1/2" travel, 2-1/2" diameter
quill and micrometer depth stop.
•
4" column with 1/2" thick wall for great rigidity,
accuracy.
•
Precision ground 22" x 19" oil trough table, handles
large parts and fixtures.
Dial to the best RPM for the tool and material while the job is
running, with a Clausing LOW/HIGH Variable Speed Drill Press
20" VARIABLE SPEED DRILL PRESS
MODEL No.
2274-1
Reg. $4305.00
$3995.00
Model
Variable Speed
Motor
Table Size
Quill Size
Spindle Travel
Column Size
Weight
Price
2277-1
150-2000
1-1/2 H.P.
22" x 19"
2-1/2"
6-1/2"
66"
630 lbs.
$4450.00
2274-1
300-2000
1-1/2 H.P.
22" x 19"
2-1/2"
6-1/2"
66"
630 lbs.
$3995.00
VSH-100A
Cutter Set
Sizes: 4mm, 5mm,
7mm, 8mm, 10mm
Page 382
HAND OPERATED
SURFACE GRINDER
Features:
•
The table slides on 36 precision ball bearings. You can
move it with fingertip pressure.
•
Ball bearings do not require periodic disassembly and
cleaning. 7" wheel, 6" x 12" travel.
•
•
3/4 H.P. motor, 1 phase, 3500 rpm.
•
Includes 5" x 10" magnetic chuck.
Specifications:
Table travel longitudinal . . . . . . . . 12-5/8"
Crossfeed . . . . . . . . . . . . . . . . . . 6-11/16"
Height under 7" dia. wheel . . . . . . . 5-1/2"
Speed . . . . . . . . . . . . . . . . . . . . 3500 RPM
Graduations . . . . . . . . . . . . . . . . . . 0.001"
Working surface . . . . . . . . 5-1/4" x 12-1/4"
Weight . . . . . . . . . . . . . . . . . . . . . 451 lbs.
MODEL No.
GSG-12B
W/5"x10"
Mag. Chuck
Less Cabinet Stand
Optional:
Cabinet Base
MODEL No.
GSG-12S
Made in
Taiwan
$2495.00
$245.00
SHAPLANE RADIUS TOOLS
•
A simple and accurate way to turn a
radius.
•
Each unit features a rigid cast iron
construction for an accurate chatter-
free operation and long life. The
gearing is fully enclosed to prevent
the entrance of any chips or foreign
matter.
•
Extension handles are included to
keep your hands away from the hot
chips while feeding the tool.
•
All tools use 1/4" square tool bits
except for the No. 24804 which
uses a 3/8" square tool bit.
HOLDRIDGE
RADII-CUTTER - CUTS AND FORMS CONCAVE, CONVEX, SPHERICAL SHAPES
MODEL No.
14-PA
$2195.00
Power Drive Unit For 12-DL
The
Model 12-DL
fits lathes 15" and larger and will cut from 0 to12" diameter convex
ball shapes and from 0 to 12" concave sockets to radius depth. By reversing the "C"
yokes, larger diameter sockets may be formed up to 24" depending upon capacity of
lathe. The radius depth will be minus 3/4" to allow for the "boss line" of the Radii-
Cutter. Compound height from the base of the tool to the centerline is adjustable from
1-5/8" to 1-3/4". Tool may be shimmed to fit various model lathes and turret lathes.
The popular
Model 4-ST Radii-Cutter
for medium lathes will cut from 0 to 4"
diameter convex ball shapes and from 0 to 4" concave sockets to radius depth. By
reversing the "C" yoke, sockets up to 12" in diameter may be formed. However,
radius depth will be minus 17/32" to allow for the "boss line" of the tool. Compound
height from the base of the tool to the centerline is adjustable from 1-5/8" to 1-3/4".
Tool may be shimmed to fit various model lathes and turet lathes
The small
Model 3-ST Radii-Cutter
is specially designed for all small lathes, will
cut from 0 to 3" diameter convex ball shapes and from 0 to 3" concave sockets to
radius depth. By reversing the yoke, sockets up to 8" may be formed, however,
radius depth will be minus 17/32" to allow for the "boss line" of the tool. Two
additional straight spindle yokes and two additional tool bits as well as a dial
calibrated in degrees are supplied in the
deluxe model
for forming pipe bending
dies, form rollers, etc. Compound height from base of the tool to the centerline is
1". Tool may be shimmed to fit various model lathes and turret lathes.
The
Model 8-DL
fits all medium and large lathes and will cut from 0 to 8" convex
ball shapes and from 0 to 8" concave sockets to radius depth. By reversing the
large "C" yoke sockets up to 20" may be formed, however, the radius depth will
be minus 3/4" to allow the "boss line" of the Radii-Cutter. Compound height from
the base of the tool to the centerline is adjustable from 1-5/8" to 1-3/4". Tool may
be shimmed to fit various model lathes and turret lathes.
MODEL 3-ST Standard And 3-DL Deluxe
MODEL No. 3-ST -
$650.00
MODEL No. 3-DL -
$895.00
MODEL 8-DL Deluxe Rad II Cutter Set
MODEL No. 8-DL Deluxe -
$1995.00
MODEL 4-ST Standard And 4-DL Deluxe
MODEL No. 4-ST -
$750.00
MODEL No. 4-DL -
$1150.00
MODEL 12-DL Deluxe Rad II Cutter Set
MODEL No. 12-DL Deluxe -
$2750.00
VERTICAL SLOTTING HEAD
•
Forms indicate shapes extruded dies and
complex patterns.
•
Mounts on the rear of the V-Ram (suitable
for any Bridgeport type mills).
•
Easy adjustment to make any key or
groove on cone or tilted surface.
•
Vise-type clamping flange (Easy
mounting and discharging)
•
Swing the turret 180º to position it
over the table and ready to work.
•
Uses a Vertical tool motion to shape
and slot.
Specifications:
Stroke . . . . . . . . . . . . . . . . . . 0-5"
Strokes Per Min . . . . . . 35, 54, 79,
112, 160
Motor Speed . . . . . . . . 1370 RPM
Motor . . . . 3/4 H.P. 220V, 3 Phase
VSH-100B (Flange)
VSH-100
(Tool Cutter)
Model
24801
24803
24804
24805
24806
24807
Radius
Convex Max. 2-1/2" Dia. Ball 1-1/4" x 9/16" x 6" $345.00
Concave
Concave
Convex Max. 1-5/8" Dia. Ball
Concave
Concave
Range
Min. 1/2" Radius
Min. 1" Radius
Min. 3/8" Radius
Min. 3/4" Radius
Shank
1-1/4" x 9/16" x 6"
1-1/4" x 9/16" x 6"
1" x 3/8" x 4"
1" x 3/8" x 4"
1" x 3/8" x 4"
List
345.00
345.00
325.00
325.00
325.00
Sale
$295.00
295.00
295.00
265.00
265.00
265.00
No. 24801, 24803 and 24804 are for lathes 13" and over.
No. 24805, 24806 and 24807 are for lathes 9" to 13"
Model
VSH-100
VSH-100A
VSH-100B
Description
Vertical Slotting Head
Cutter Set
Flange
Price
$2795.00
395.00
295.00
•
Heavy-duty precision head... all bearing surfaces
are precision bored simultaneously for exact
alignment. Eight ball bearings support the drive
and spindle, lower spindle bearing has a double
row to absorb both radial and thrust loads.
•
3 MT spindle... with 6-1/2" travel, 2-1/2" diameter
quill and micrometer depth stop.
•
4" column with 1/2" thick wall for great rigidity,
accuracy.
•
Precision ground 22" x 19" oil trough table, handles
large parts and fixtures.
Dial to the best RPM for the tool and material while the job is
running, with a Clausing LOW/HIGH Variable Speed Drill Press
20" VARIABLE SPEED DRILL PRESS
MODEL No.
2274-1
Reg. $4305.00
$3995.00
Model
Variable Speed
Motor
Table Size
Quill Size
Spindle Travel
Column Size
Weight
Price
2277-1
150-2000
1-1/2 H.P.
22" x 19"
2-1/2"
6-1/2"
66"
630 lbs.
$4450.00
2274-1
300-2000
1-1/2 H.P.
22" x 19"
2-1/2"
6-1/2"
66"
630 lbs.
$3995.00
VSH-100A
Cutter Set
Sizes: 4mm, 5mm,
7mm, 8mm, 10mm
