Page 70 Penn Tool Co. Precision Tooling Buyer's Guide 2019

68
Economy
Indicating Micrometer
• Jeweled bearings, hardened pinion and gear.
• Hardened and precision ground spindle and anvil, 0.255" dia.
• Push button actuated retractable anvil, 0.040" travel.
• Indicator range ±0.003", reading 0.00005".
• Micrometer reading 0.001".
• Indicating accuracy 0.00008".
• Satin chromed frame with plastic heatshield.
• Furnished in wooden case.
DESCRIPTION
PART NO.
PRICE
0 – 1" Indicating Mic.
51-551-0
$299.95
51-551-0
Indicating Micrometers
• Retractable anvil with indicator for precise measurement.
• Carbide tipped measuring faces.
• Lever lock.
• Spindle dia.: 0.250"/6 mm
• Indicator Resolution: 0.00005"/0.001 mm
• Indicator Range: ±0.0016"/0.04 mm
• Micrometer Reading: 0.0001"/0.002 mm
• Standards included above 0 -1" range.
• 1 - 2" does not have center support.
• Short Form Certificate of Calibration included.
• Furnished in fitted case.
• 2 year warranty.
MEAS. RANGE
ACCURACY
PART NO.
PRICE
0 - 1"
±0.0001"
21-070-8
$565.45
1 - 2"
±0.0002"
21-071-6
667.35
0 - 25 mm
±0.002 mm
21-074-0
602.60
21-070-8
2 1
-070-
8
IP54 Dial Snap Meter
Outside Indicating Limit Gage
• Direct Go/No-Go judgment for mass produced parts.
• Hard coating to shield indicator’s window
plate from scratches.
• Easy to read large-sized graduation plates.
• Spindle dia.: 0.425"/10.8 mm.
• Indicating range: ±0.0023".
• Accuracy: 0.00005".
• Flatness: 0.000012".
• Parallelism: 0.000024".
• Supplied in fitted plastic case.
MEAS.
MITUTOYO PART
RANGE
MODEL # NUMBER
PRICE
0 – 1"
523-131
11-528-7
$810.00
11-528-7
IP54 Indicating
Micrometers
Function as a GO/NO-GO
Gage and is Great
for High Production Runs
• Large easy to read dial face.
• ±0.0023" range with
0.00005" graduations.
• Hard coated crystal protects
against scratches.
• Can be hand held or mounted
in a micrometer stand.
• Supplied in fitted case.
MEAS. THROAT DEPTH MITUTOYO PART
RANGE
OF FRAME
MODEL # NUMBER
PRICE
0 - 1"
0.98"
510-131
10-398-6 *
$827.00
1 - 2"
1.349"
510-132
10-399-4
891.00
2 - 3"
1.97"
510-133
10-400-0
993.00
* retractable anvil button on the right side.
10-398-6
INDICATOR
PART
RANGE
READING
NUMBER
PRICE
0 - 1"
0.0001"
12-107-9
$1,496.05
1 - 2"
0.0001"
12-108-7
1,616.00
0 - 1"
0.00005"
12-109-5
1,458.65
1 - 2"
0.00005"
12-110-3
1,527.00
0 - .800" 0.00005"
12-111-1
* 1,544.00
* With small measuring faces. Diameter of pins anvils 0.080".
Length of pin anvils 0.200".
DESCRIPTION
PART NO.
PRICE
Cover Assembly
02-079-2
Call
Indicating
Micrometers
• Easy to read, wide spaced
graduations are permanently
deep-etched on large diameter
barrel and thimble.
Satin chrome finish.
• Can be set for continuous accurate gaging.
Push button activated retractable anvil for
quick insertion and removal of parts.
Adjustable part-support rod.
• Positive spindle lock. Hardened and
precision ground stainless steel spindle.
• Carbide measuring faces.
Flatness of measuring faces 0.000012".
• Micrometer reading 0.0001".
Fine dial-adjustment with knurled
button for accurate zero setting.
• Adjustable tolerance hands, color coded
for plus and minus sides.
• Jeweled, shock proof movement.
Repeatability of dial indicator 0.00008".
• Supplied in fitted case with
2 adjusting wrenches.
e gaging.
Swiss
Made