Page 75 Penn Tool Co. Precision Tooling Buyer's Guide 2019
P. 75
73
0 - 2" Interchangeable
Anvil Micrometer
• Now Measure 0 - 1" & 0 - 2" using this special 1" anvil attachment.
• The length of the attachment is exactly 1"
so the micrometer can be self-checked at 1".
• Carbide tipped spindle.
• Ratchet stop on thimble.
• Graduations: 0.0001" reading is obtained with vernier.
• Model 104-165
DESCRIPTION
PART NO.
PRICE
Interchangeable Anvil Micrometer
10-512-2
$200.00
10-512-2
Digimatic
Interchangeable
Anvil Micrometers
• Inch/Metric with IP65 water/dust protection.
• LCD readout. Resolution: 0.0001"/0.0010 mm.
• Carbide faces.
• Spindles are micro-lapped with carbide faces.
• Ratchet stop.
• ABS/INC, origin set, inch/metric, zero settingand data output hold.
• SPC output is compatible with Mitutoyo DP
series mini-processors and other SPC systems.
• Supplied with 6 anvils and 6 standards.
• Complete with fitted carrying case.
MEAS.
MITUTOYO
PART
RANGE
MODEL #
NUMBER
PRICE
0 - 6"
340-351-10
10-619-5 *
$714.00
6 - 12" 340-352-10
10-620-3
878.00
12 - 18"
340-713
10-621-1
1,100.00
18 - 24"
340-714
10-622-9
1,250.00
* Resolution: 0.00005"/0.0010 mm.
Supplied with 6 anvils and 5 standards.
Accessories
MITUTOYO
PART
DESCRIPTION
MODEL #
NUMBER
PRICE
40" SPC Output Cable
05CZA662
31-027-6
$81.75
80" SPC Output Cable
05CZA663
31-028-4
90.15
Repl. Battery (357/303)
07-310-6
2.25
10-619-5
Micrometer Standards
• Use for calibration of micrometers, as spacing bars for stages
and for checking accuracy of vernier and dial calipers.
• Complete with heat insulating handle.
• Lapped measuring ends: Flat ends for 12"/300 mm and under.
Spherical ends for over 12"/300 mm.
Inch
LENGTH
ACCURACY
PART NO.
PRICE
LENGTH
ACCURACY
PART NO.
PRICE
1"
±0.00005"
12-471-9
$13.95
13"
±0.00025"
12-483-4
$46.50
2"
±0.00010"
12-472-7
16.50
14"
±0.00025"
12-484-2
48.25
3"
±0.00010"
12-473-5
17.75
15"
±0.00025"
12-485-9
49.90
4"
±0.00010"
12-474-3
21.55
16"
±0.00025"
12-486-7
52.80
5"
±0.00015"
12-475-0
24.10
17"
±0.00025"
12-487-5
57.00
6"
±0.00015"
12-476-8
26.65
18"
±0.00025"
12-488-3
60.70
7"
±0.00015"
12-477-6
30.45
19"
±0.00030"
12-489-1
62.10
8"
±0.00015"
12-478-4
32.95
20"
±0.00030"
12-490-9
65.90
9"
±0.00020"
12-479-2
35.50
21"
±0.00030"
12-491-7
67.15
10"
±0.00020"
12-480-0
39.30
22"
±0.00030"
12-492-5
70.15
11"
±0.00020"
12-481-8
41.85
23"
±0.00030"
12-493-3
72.25
12"
±0.00025"
12-482-6
45.20
—
—
—
Metric
LENGTH
ACCURACY
PART
LENGTH
ACCURACY
PART
(MM)
(MM)
NUMBER
PRICE
(MM)
(MM)
NUMBER
PRICE
25
±0.0020
14-200-0
$13.70
300
±0.0050
14-211-7
$44.75
50
±0.0020
14-201-8
17.40
325
±0.0050
14-212-5
46.00
75
±0.0020
14-202-6
17.40
350
±0.0050
14-213-3
48.50
100
±0.0020
14-203-4
21.15
375
±0.0050
14-214-1
49.70
125
±0.0025
14-204-2
26.10
400
±0.0050
14-215-8
55.95
150
±0.0030
14-205-9
29.85
425
±0.0060
14-216-6
58.40
175
±0.0030
14-206-7
29.85
450
±0.0060
14-217-4
60.90
200
±0.0030
14-207-5
32.35
475
±0.0060
14-218-2
64.65
225
±0.0040
14-208-3
34.85
500
±0.0060
14-219-0
65.90
250
±0.0040
14-209-1
38.55
525
±0.0060
14-220-8
67.15
275
±0.0040
14-210-9
41.00
575
±0.0060
14-221-6
70.85
Micrometer Stand
An Absolute Must For The
Tool Room, Repetitive Parts
Measurementand Any SPC System
• Fits 0.5" - 4" micrometers.
• Facilitates with one hand
operation of micrometers.
• Eliminates pick up and set
down of micrometer.
• Cast iron with enamel wrinkle finish.
DESCRIPTION
PART NO.
PRICE
Micrometer Stand
12-460-2
$49.70
em
RICE
12-460-2
Folding
Micrometer Stand
• This compact folding micrometer stand has a
locking mechanism that holds any micrometer
in the perfect position for use and viewing.
• For use with 0 - 1" micrometers.
DESCRIPTION
PART NO.
PRICE
Folding Micrometer Stand
12-469-3
$23.35
12-469-3
12-469-3
Micrometer
not included.
0 - 2" Interchangeable
Anvil Micrometer
• Now Measure 0 - 1" & 0 - 2" using this special 1" anvil attachment.
• The length of the attachment is exactly 1"
so the micrometer can be self-checked at 1".
• Carbide tipped spindle.
• Ratchet stop on thimble.
• Graduations: 0.0001" reading is obtained with vernier.
• Model 104-165
DESCRIPTION
PART NO.
PRICE
Interchangeable Anvil Micrometer
10-512-2
$200.00
10-512-2
Digimatic
Interchangeable
Anvil Micrometers
• Inch/Metric with IP65 water/dust protection.
• LCD readout. Resolution: 0.0001"/0.0010 mm.
• Carbide faces.
• Spindles are micro-lapped with carbide faces.
• Ratchet stop.
• ABS/INC, origin set, inch/metric, zero settingand data output hold.
• SPC output is compatible with Mitutoyo DP
series mini-processors and other SPC systems.
• Supplied with 6 anvils and 6 standards.
• Complete with fitted carrying case.
MEAS.
MITUTOYO
PART
RANGE
MODEL #
NUMBER
PRICE
0 - 6"
340-351-10
10-619-5 *
$714.00
6 - 12" 340-352-10
10-620-3
878.00
12 - 18"
340-713
10-621-1
1,100.00
18 - 24"
340-714
10-622-9
1,250.00
* Resolution: 0.00005"/0.0010 mm.
Supplied with 6 anvils and 5 standards.
Accessories
MITUTOYO
PART
DESCRIPTION
MODEL #
NUMBER
PRICE
40" SPC Output Cable
05CZA662
31-027-6
$81.75
80" SPC Output Cable
05CZA663
31-028-4
90.15
Repl. Battery (357/303)
07-310-6
2.25
10-619-5
Micrometer Standards
• Use for calibration of micrometers, as spacing bars for stages
and for checking accuracy of vernier and dial calipers.
• Complete with heat insulating handle.
• Lapped measuring ends: Flat ends for 12"/300 mm and under.
Spherical ends for over 12"/300 mm.
Inch
LENGTH
ACCURACY
PART NO.
PRICE
LENGTH
ACCURACY
PART NO.
PRICE
1"
±0.00005"
12-471-9
$13.95
13"
±0.00025"
12-483-4
$46.50
2"
±0.00010"
12-472-7
16.50
14"
±0.00025"
12-484-2
48.25
3"
±0.00010"
12-473-5
17.75
15"
±0.00025"
12-485-9
49.90
4"
±0.00010"
12-474-3
21.55
16"
±0.00025"
12-486-7
52.80
5"
±0.00015"
12-475-0
24.10
17"
±0.00025"
12-487-5
57.00
6"
±0.00015"
12-476-8
26.65
18"
±0.00025"
12-488-3
60.70
7"
±0.00015"
12-477-6
30.45
19"
±0.00030"
12-489-1
62.10
8"
±0.00015"
12-478-4
32.95
20"
±0.00030"
12-490-9
65.90
9"
±0.00020"
12-479-2
35.50
21"
±0.00030"
12-491-7
67.15
10"
±0.00020"
12-480-0
39.30
22"
±0.00030"
12-492-5
70.15
11"
±0.00020"
12-481-8
41.85
23"
±0.00030"
12-493-3
72.25
12"
±0.00025"
12-482-6
45.20
—
—
—
Metric
LENGTH
ACCURACY
PART
LENGTH
ACCURACY
PART
(MM)
(MM)
NUMBER
PRICE
(MM)
(MM)
NUMBER
PRICE
25
±0.0020
14-200-0
$13.70
300
±0.0050
14-211-7
$44.75
50
±0.0020
14-201-8
17.40
325
±0.0050
14-212-5
46.00
75
±0.0020
14-202-6
17.40
350
±0.0050
14-213-3
48.50
100
±0.0020
14-203-4
21.15
375
±0.0050
14-214-1
49.70
125
±0.0025
14-204-2
26.10
400
±0.0050
14-215-8
55.95
150
±0.0030
14-205-9
29.85
425
±0.0060
14-216-6
58.40
175
±0.0030
14-206-7
29.85
450
±0.0060
14-217-4
60.90
200
±0.0030
14-207-5
32.35
475
±0.0060
14-218-2
64.65
225
±0.0040
14-208-3
34.85
500
±0.0060
14-219-0
65.90
250
±0.0040
14-209-1
38.55
525
±0.0060
14-220-8
67.15
275
±0.0040
14-210-9
41.00
575
±0.0060
14-221-6
70.85
Micrometer Stand
An Absolute Must For The
Tool Room, Repetitive Parts
Measurementand Any SPC System
• Fits 0.5" - 4" micrometers.
• Facilitates with one hand
operation of micrometers.
• Eliminates pick up and set
down of micrometer.
• Cast iron with enamel wrinkle finish.
DESCRIPTION
PART NO.
PRICE
Micrometer Stand
12-460-2
$49.70
em
RICE
12-460-2
Folding
Micrometer Stand
• This compact folding micrometer stand has a
locking mechanism that holds any micrometer
in the perfect position for use and viewing.
• For use with 0 - 1" micrometers.
DESCRIPTION
PART NO.
PRICE
Folding Micrometer Stand
12-469-3
$23.35
12-469-3
12-469-3
Micrometer
not included.
